ChemicalBook >>Tetrabromobisphenol A>>Tetrabromobisphenol A(79-94-7)

Tetrabromobisphenol A(79-94-7)

Tetrabromobisphenol A(79-94-7)
Product IdentificationBack to Contents
【Product Name】

Tetrabromobisphenol A
【Synonyms】

2,2-bis(3,5-Dibromo-4-hydroxyphenyl)propane
2,2-bis(4-Hydroxy-3,5-dibromophenyl)propane
Bromdian
FG 2000
Fire guard 2000
Firemaster bp4a
【CAS】

79-94-7
【Formula】

C15H12Br4O2
【Molecular Weight】

543.87
【EINECS】

201-236-9
【RTECS】

SM0894500
【RTECS Class】

Reproductive Effector; Primary Irritant
【Beilstein/Gmelin】

1889048
【Beilstein Reference】

3-06-00-05462
Physical and Chemical PropertiesBack to Contents
【Appearance】

White powder. A monomer for flame-retardant epoxy, polyester and polycarboante resins.
【Solubility in water】

Insoluble
【Melting Point】

136 - 137
【Boiling Point】

418
【Vapor Pressure】

1E-7 (25 C)
【Density】

2.158 g/cm3 (20 C)
【pKa/pKb】

6.33 (pKa)
【Partition Coefficient】

7.29
【Heat Of Vaporization】

69.7 kJ/mol
【Usage】

Flame retardant.
First Aid MeasuresBack to Contents
【Ingestion】

If the exposed person is convulsing or unconscious, you should not attempt first aid. Transport immediately to a hospital emergency room or poison control center. If the victim is conscious, administer large volumes of liquid then immediately induce vomiting. Transport at once to a medical facility.
【Inhalation】

Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
【Skin】

You should remove all contaminated clothing and flood skin with water. Wash all affected skin areas thoroughly with soap and water and seek immediate medical attention.
【Eyes】

Check for contact lenses and remove them at once if present. You should then immediately flush eyes with water from any source for 15 minutes. Do not use oil or ointment in eyes. Arrange immediate transportation to a medical facility.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
【Respirators】

Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
【Exposure Effects】

The toxicological properties of this material have not been investigated.
Fire Fighting MeasuresBack to Contents
【Flash Point】

206
【Fire Fighting】

You should extinguish fires involving this chemical with a dry chemical, foam, carbon dioxide or halon extinguisher.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

If you spill this chemical, dampen the solid spill material with toluene, then transfer the dampened material to a suitable container. Use absorbent paper dampened with toluene to pick up any remaining material. Your contaminated clothing and the absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent-wash all contaminated surfaces with toluene followed by washing with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stability and ReactivityBack to Contents
【Stability】

No data.
【Combustion Products】

When tetrabromobisphenol a was pyrolyzed in open quartz tubes for 10 min, brominated dibenzo p dioxins and dibenzofurans were generated at 700 C and increased at 800 C; at 900 C a decrease in levels of these combustion products was found.
Hazards IdentificationBack to Contents
【Hazards】

This compound is nonflammable.
Company Name: Shanghai Dingfen Chemical Technology Co., Ltd.
Tel: 021-57450129 02157450129
Fax: 021-57450128
WebSite: http://karmachem.cn
Company Name: Jinan Wald Chemical Co., Ltd.
Tel: 0531-88773586 13210588999
Fax: 053188773586
WebSite: https://www.chemicalbook.com/ShowSupplierProductsList1770979/0.htm
Company Name: SHANGHAI INSPO CHEMICAL CO.,LTD
Tel: 18917565227
Fax:
WebSite: www.inspochem.com/
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 021-61259108 18621169109
Fax: 86-21-61259102
WebSite: www.meryer.com/cn/index/
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: TAIYUAN RHF CO.,LTD.
Tel: +86 351 7031519
Fax: +86 351 7031519
WebSite: www.rhfchem.com
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/