Acrylonitrile manufacturers and suppliers

Acrylonitrile suppliers

Properties

Melting point:: -83 °C (lit.)

Boiling point:: 77 °C (lit.)

Density: 0.806 g/mL at 20 °C

vapor density: 1.83 (vs air)

vapor pressure: 86 mm Hg ( 20 °C)

refractive index: n20/D 1.391(lit.)

Flash point:: 32 °F

storage temp.: 2-8°C

solubility: 73g/l

form: Liquid

color: Clear

PH: 6.0-7.5 (50g/l, H2O, 20℃)

Odor: Mild pyridine-like odor at 2 to 22 ppm

Odor Threshold: 8.8ppm

explosive limit: 2.8-28%(V)

Water Solubility: Soluble. 7.45 g/100 mL

Sensitive: Light Sensitive

Merck: 14,131

BRN: 605310

Henry's Law Constant: 1.30 at 30.00 °C (headspace-GC, Hovorka et al., 2002)

Exposure limits: NIOSH REL: TWA 1 ppm, 15-min C 1 ppm, IDLH 85 ppm; OSHA PEL: TWA 2 ppm, 15-min C 10 ppm; ACGIH TLV: TWA 2 ppm.

Dielectric constant: 33.009999999999998

LogP: 0.017 at 21℃

Safety Information

Symbol(GHS): GHS02,GHS05,GHS06,GHS08,GHS09

Signal word: Danger

Hazard statements: H225-H301+H311+H331-H315-H317-H318-H335-H350-H361fd-H411

Precautionary statements: P210-P273-P280-P301+P310-P303+P361+P353-P305+P351+P338

Hazard Codes: F,T,N,Xn

Risk Statements: 45-11-23/24/25-37/38-41-43-51/53-39/23/24/25-62-63

Safety Statements: 53-9-16-45-61-36/37

RIDADR: UN 1093 3/PG 1

WGK Germany: 3

RTECS: AT5250000

F: 8

Autoignition Temperature: 481 °C

TSCA: Yes

HazardClass: 3

PackingGroup: I

HS Code: 29261000

Toxicity: LD50 orally in rats: 0.093 g/kg (Smyth, Carpenter)

IDLA: 60 ppm

Use

Acrylonitrile is used in the production of acrylic fibers, resins, and surface coating; as an intermediate in the production of pharmaceuticals and dyes; as a polymer modifier; and as a fumigant. It may occur in fire-effluent gases because of pyrolyses of polyacrylonitrile materials. Acrylonitrile was found to be released from the acrylonitrile–styrene copolymer and acrylonitrile–styrene–butadiene copolymer bottles when these bottles were filled with food-simulating solvents such as water, 4% acetic acid, 20% ethanol, and heptane and stored for 10 days to 5 months (Nakazawa et al. 1984). The release was greater with increasing temperature and was attributable to the residual acrylonitrile monomer in the polymeric materials.

You can find Acrylonitrile suppliers, manufacturers, and distributors from countries such as CHINA, India and the United States here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.