| Product Identification | Back to Contents | 【Product Name】
Chloropentafluoroethane | 【Synonyms】
1-Chloro-1,1,2,2,2-pentafluoroethane
Refrigerant gas R-115 | 【CAS】
76-15-3 | 【Formula】
C2ClF5 | 【Molecular Weight】
154.47 | 【EINECS】
200-938-2 | 【RTECS】
KH7877500 | 【RTECS Class】
Other | 【Beilstein/Gmelin】
1740329 | 【Beilstein Reference】
4-01-00-00129 |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Chloropentafluoroethane is a colorless odorless gas with an ether-like odor. | 【Solubility in water】
60 mg/L | 【Melting Point】
-141.7 | 【Boiling Point】
-39.1 | 【Vapor Pressure】
6860 (25 C) | 【Density】
liquid density g/cm3 (25 C) = 1.291 | 【Heat Of Vaporization】
19.42 kJ/mol | 【Usage】
Refrigerant (former use). | 【Vapor Density】
8.37 | 【Refractive Index】
1.2678 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
These substances may cause frostbite to the upper airway and gastrointestinal tract after ingestion. Administer oxygen and manage airway as clinically indicated. Emesis, activated charcoal, and gastric lavage are not recommended. | 【Inhalation】
Provide a quiet calm atmosphere to prevent adrenaline surge if the patient is seen before the onset of cardiac arrhythmias. Minimize physical exertion. | 【Skin】
Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists. If frostbite has occurred, refer to dermal treatment in the main body of this document for rewarming. | 【Eyes】
Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility. Ophthamologic consultation should be obtained in any symptomatic patients. |
| Handling and Storage | Back to Contents | 【Storage】
Keep separated from incompatible substances. Protect from physical damage and heat. Containers may rupture or explode if exposed to heat. | 【Handling】
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. |
| Hazards Identification | Back to Contents | 【Inhalation】
Pulmonary irritation, bronchial constriction, cough, dyspnea, and chest tightness may develop after inhalation. Chronic pulmonary hyperreactivity may occur. Adult respiratory distress syndrome has been reported following acute inhalational exposures. Pulmonary edema is an autopsy finding in fatal cases. | 【Skin】
Dermal contact may result in defatting, irritation or contact dermatitis. Severe frostbite has been reported as an effect of freon exposure. Injection causes transient pain, erythema and edema. | 【Eyes】
EYES - Eye irritation occurs with ambient exposure. Frostbite of the lids may be severe. NOSE - Nasal irritation occurs with ambient exposure. THROAT - Irritation occurs. Frostbite of the lips, tongue, buccal mucosa and hard palate developed in a man after deliberate inhalation. | 【Ingestion】
Nausea may develop. Ingestion of a small amount of trichlorofluoromethane resulted in necrosis and perforation of the stomach in one patient. | 【Hazards】
Containers may explode when heated. Ruptured cylinders may rocket. | 【UN (DOT)】
1020 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Neoprene gloves, protective clothing, and eye protection minimize risk of topical contact. Degreasing effect on skin can be treated with lanolin ointment. Quick drench facilities and/or eyewash fountains should be provided within the immediate work area for emergency use where there is any possibility of exposure to liquids that are extremely cold or rapidly evaporating. | 【Respirators】
Wear positive pressure self-contained breathing apparatus (SCBA). | 【Exposure Effects】
Headache, dizziness, and disorientation are common. Cerebral edema may be found on autopsy. | 【Exposure limit(s)】
TLV: 1000 ppm; 6320 mg/m3 as TWA (ACGIH 1997). NIOSH REL: TWA 1000 ppm (6320 mg/m3) | 【Poison Class】
5 |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
70.4 | 【Fire Fighting】
Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. | 【Fire Potential】
May burn but does not ignite readily. |
| Stability and Reactivity | Back to Contents | 【Stability】
Has good thermal stability. | 【Incompatibilities】
Incompatible with the following: Alkalis, alkaline earth metals (e.g., aluminum powder, sodium, potassium, zinc). | 【Decomposition】
Under certain conditions, fluorocarbon vapors may decompose on contact with flames or hot surfaces, creating the potential hazard of inhalation of toxic decomposition products. Fluorocarbons when heated to decomposition it emits toxic fumes of hydrogen fluoride and hydrogen chloride. | 【Combustion Products】
All fluorocarbons will undergo thermal decomposition when exposed to flame or red-hot metal. |
|
|