ChemicalBook >>2,6-Dichloroanisole>>2,6-Dichloroanisole(1984-65-2)

2,6-Dichloroanisole(1984-65-2)

2,6-Dichloroanisole(1984-65-2)
Product IdentificationBack to Contents
【Product Name】

2,6-Dichloroanisole
【Synonyms】

1,3-Dichloro-2-methoxybenzene
2,6-Dichlorophenyl methyl ether
【CAS】

1984-65-2
【Formula】

C7H6Cl2O
【Molecular Weight】

177.03
【EINECS】

217-855-2
【Beilstein/Gmelin】

2044478
【Beilstein Reference】

4-06-00-00949
Physical and Chemical PropertiesBack to Contents
【Appearance】

Clear, colorless liquid.
【Solubility in water】

Insoluble
【Melting Point】

10.1
【Boiling Point】

56 (0.8 torr)
【Density】

1.291 g/cm3 (20 C)
【Vapor Density】

6.1
【Refractive Index】

1.5436
First Aid MeasuresBack to Contents
【Ingestion】

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
【Inhalation】

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration.
【Skin】

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
【Eyes】

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Handling and StorageBack to Contents
【Storage】

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
【Handling】

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards IdentificationBack to Contents
【Inhalation】

May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
【Skin】

May cause irritation and dermatitis. May cause cyanosis of the extremities.
【Eyes】

May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
【Ingestion】

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
【Hazards】

During a fire, irritating and highly toxic gasesmay be generated by thermal decomposition or combustion.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
【Respirators】

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
【Exposure Effects】

Effects may be delayed.
Fire Fighting MeasuresBack to Contents
【Flash Point】

91
【Fire Fighting】

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. Cool containers with flooding quantities of water until well after fire is out. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Stability and ReactivityBack to Contents
【Incompatibilities】

Oxidizing agents
【Stability】

Stable under normal temperatures and pressures.
【Decomposition】

Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 021-61259108 18621169109
Fax: 86-21-61259102
WebSite: www.meryer.com/cn/index/
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/
Company Name: BeiJing Hwrk Chemicals Limted
Tel: 0757-86329057 18934348241
Fax: 010-89508210
WebSite: www.hwrkchemical.com/
Company Name: Energy Chemical
Tel: 021-021-58432009 400-005-6266
Fax: 021-58436166
WebSite: http://www.energy-chemical.com
Company Name: Capot Chemical Co., Ltd
Tel: +86 (0) 571 85 58 67 18
Fax: 0086-571-85864795
WebSite: www.capotchem.com
Company Name: Beijing Ouhe Technology Co., Ltd
Tel: 010-82967028 13552068683
Fax: +86-10-82967029
WebSite: http://www.ouhechem.com/