| Identification | Back Directory | [Name]
ZIRCONIUM BORIDE | [CAS]
12045-64-6 | [Synonyms]
ZRB2 B
ZirconiuM borid
Einecs 234-963-5
ZIRCONIUM BORIDE
ZIRCONIUM DIBORIDE
zirconiumboride(zrb2)
Zirconium boride/ 99+%
ZIRCONIUM BORIDE: 99.5%
ZirconiuM Boride, Powder
Zirconium diboride (zrb2)
Zirconium boride powder (ZrB2)
Zirconiumboride,99.5%(metalsbasis)
Zirconium boride, 99.5% trace metals basis
ZIRCONIUM DIBORIDE, POWDER, <5 MICRON, 9 5%
Zirconium boride (metals basis excluding Hf)
Zirconium boride, 99.5% (metals basis excluding Hf)
ZIRCONIUM DIBORIDE: GRADE A, A PRODUCT OF H.C. STARCK
ZIRCONIUM DIBORIDE, GRADE B, A PRODUCT OF H.C. STARCK
zirconium boride (zrb2) zirconium boride Zirconium boride(ZrB2) | [EINECS(EC#)]
234-963-5 | [Molecular Formula]
B2Zr | [MDL Number]
MFCD00064648 | [MOL File]
12045-64-6.mol | [Molecular Weight]
112.85 |
| Chemical Properties | Back Directory | [Appearance]
Gray metallic crystals or powders. Mohs hardness 8, electrical resistivity
9.2 micro-ohm-cm (20C), excellent thermal
shock resistance, poor oxidation resistance above
1100C. | [Melting point ]
3100-3500°C | [density ]
6,1 g/cm3 | [RTECS ]
ZH7150000 | [form ]
powder
| [color ]
gray refractory solid;
hexagonal, hexane | [Resistivity]
9.2 (ρ/μΩ.cm) | [Water Solubility ]
It is insoluble in water. | [Crystal Structure]
Hexagonal | [Exposure limits]
ACGIH: TWA 5 mg/m3; STEL 10 mg/m3
NIOSH: IDLH 25 mg/m3; TWA 5 mg/m3; STEL 10 mg/m3 | [Uses]
Refractory for aircraft and rocket applications,
thermocouple protection tubes, high temperature
electrical conductor, cutting tool component, coating
tantalum, cathode in high-temperature electrochemical
systems. | [EPA Substance Registry System]
Zirconium boride (ZrB2) (12045-64-6) |
| Hazard Information | Back Directory | [Description]
Zirconium diboride (ZrB2) is a highly covalent refractory ceramic material with a hexagonal crystal structure. ZrB2 is known as a UHTC with a melting point of 3246C. This together with its relatively low density of B6.09 g/cm3 (measured density may be higher due to hafnium impurities) and good high-temperature strength makes it a contender for high-temperature aerospace applications, for example, hypersonic flight or rocket propulsion systems. It is an unusual ceramic with relatively high thermal and electrical conductivities. | [Chemical Properties]
Gray metallic crystals or powders. Mohs hardness 8, electrical resistivity
9.2 micro-ohm-cm (20C), excellent thermal
shock resistance, poor oxidation resistance above
1100C. | [Physical properties]
Gray metallic crystals, excellent
thermal shock resistance,
greatest oxidation inertness
of all refractory hardmetals.
Hot-pressed crucible for
handling molten metals such
as Zn, Mg, Fe, Cu, Zn, Cd, Sn,
Pb, Rb, Bi, Cr, brass, carbon
steel, cast irons, and molten
cryolithe, yttria, zirconia, and
alumina. Readily corroded by
liquid metals such as Si, Cr, Mn,
Co, Ni, Nb, Mo, Ta and attacked
by molten salts such as Na O, 2
alkali carbonates, and NaOH.
Severe oxidation in air occurs
above 1100–1400°C. Stable
above 2000°C in inert or
reducing atmosphere. | [Application]
Zirconium diboride (ZrB2) is an ultra high termparature ceramic powder. With good high temperature strength, it is used in the aerospace industry for hypersonic flight or rocket propulsion. ZrB2 is a kind of senior engineering material broadly used in various fields. Refractory for aircraft and rocket applications, thermocouple protection tubes, high temperature electrical conductor, cutting tool component, coating tantalum, cathode in high-temperature electrochemical systems. | [Industrial uses]
Zirconium boride is a microcrystalline graypowder of the composition ZrB2. When compressedand sintered to a specific gravity ofabout 5.3, it has a Rockwell A hardness of 90,a melting point of 2980°C, and a tensilestrength of 241 to 276 MPa. It is resistant tonitric and hydrochloric acids, to molten aluminumand silicon, and to oxidation. At 1204°Cit has a transverse rupture strength of 379 MPa.It is used for crucibles and for rocket nozzles. | [Synthesis]
Zirconium boride powder is mainly prepared by carbothermic reduction of ZrO2 powder and carbon black or graphite powder. The reaction equation is:
3ZrO2+B4C+8C+B2O3=3ZrB2+9CO↑
Zirconium boride obtained from zirconia and boron oxide by magnesiothermic MASHS. |
|
|