返回ChemicalBook首页>CAS数据库列表>85138-49-4

85138-49-4

中文名称 2,7-双(2-羧乙基)-5(6)-羧基荧光素
英文名称 2`,7`-Bis(2-carboxyethyl)-5(6)-carboxyfluorescein
CAS 85138-49-4
分子式 C27H20O11
分子量 520.44
MOL 文件 85138-49-4.mol
85138-49-4 结构式 85138-49-4 结构式

基本信息

中文别名
PH荧光探针BCECF,酸
2,7-双-(羧乙基)-羧基-荧光素
2,7-双(2-羧乙基)-5(6)-羧基荧光素
2`,7`-双(2-羧基乙基)-5(6)-羧基荧光素
2',7'-二-(2-羧乙基)-5(6)-羧基荧光素
5(OR 6)-羧基-3',6'-二羟基-3-氧代-螺[异苯并呋喃-1(3H),9'-[9H]氧杂蒽]-2',7'-二丙酸
5(OR6)-羧基-3',6'-二羟基-3-氧代-螺[异苯并呋喃-1CHEMICALBOOK(3H),9'-[9H]氧杂蒽]-2',7'-二丙酸
英文别名
BCECF
BCECF acid *CAS#: 85138-49-4*
2',7'-Biscarboxyethyl-6-carboxyfluorescein
2',7'-BIS-(CARBOXYETHYL)-CARBOXY-FLUORESCEIN
2,7-Bis(2-carboxyethyl)-6-carboxyfluoresceine
2',7'-Bis(carboxyethyl)-4or5-carboxyfluorescein
2'7'-BIS-(2-CARBOXYETHYL)-5-(AND-6) FLUORESCEIN
2',7'-BIS(CARBOXYETHYL)-5(6)-CARBOXYFLUORESCEIN
2',7'-BIS-(CARBOXYETHYL)-5(6')-CARBOXYFLUORESCEIN
2',7'-BIS(2-CARBOXYETHYL)-5(6)-CARBOXYFLUORESCEIN

物理化学性质

储存条件-20°C
溶解度DMF: 5 mg/ml; DMSO: 15 mg/ml; DMSO:PBS (pH 7.2) (1:2): 0.25 mg/ml; Ethanol: 5 mg/ml
形态A crystalline solid
颜色Yellow to orange
BRN8375770

安全数据

危险品标志Xn
危险类别码20/21/22-36/37/38
安全说明22-24/25-36-26
WGK Germany3
F8
2,7-双(2-羧乙基)-5(6)-羧基荧光素价格(试剂级)
报价日期产品编号产品名称CAS号包装价格
2024/01/25HY-1018822,7-双(2-羧乙基)-5(6)-羧基荧光素
BCECF
85138-49-41mg1600元

常见问题列表

生物活性
BCECF 是一种对 pH 敏感 (pH-sensitive) 的荧光染料,可用于监测细胞的 pH 比值。BCECF 允许测量生理 pH 值范围在 6.0-8.0 之间。激发波长: 490/440 nm; 发射强度: 535 nm。
体外研究

Fully treated cells show hydrogenosomes with an electron-dense deposit which aggregates to a variable extent.The staining is seen in the interior of hydrogenosomes in some instances. It is also observed by microscopy that the K + /H + ionophor nigericin does not inhibit hydrogenosomal loading with BCECF.The pH-sensitive fluorescent dyes to measure cytosolic pH. 1.Prepare a 2 to 20 mM stock solution of BCECF in DMSO. 2.Prepare a 5-50 µM BCECF dye-loading solution in buffer solutions (HHBS or PBS).3. Add 1000 µL/well (6-well plate),100 µL/well (96-well plate) or 25 µL/well (384-well plate) BCECF dye-loading solution into the cell plate.4. Incubate the dye-loading plate in a cell incubator for 30-60 minutes.5. Wash and replace the dye-loading solution with buffers.6. Run the pH assay by monitoring the fluorescence at E x /E m = 490/535 nm or 430/535 nm for ratio measurements.

"85138-49-4" 相关产品信息
536-60-7 596-27-0 76823-03-5 1517-63-1 713-68-8 117464-70-7 610-72-0 1877-71-0 619-64-7 3301-79-9