Aphamite Chemische Eigenschaften,Einsatz,Produktion Methoden
Chemische Eigenschaften
Parathion is a clear liquid when fresh; pale
yellow to dark brown liquid with a garlic-like odor.
Commercial formulations use carrier solvents that may
change the physical properties shown.
mögliche Exposition
A severely hazardous pesticide formulation.
Those exposed include those engaged in manufacture,formulation and application of this broad spectrum insecticide.
This material has also been used as a chemical warfare agent.
Versand/Shipping
UN3278 Organophosphorus compound, liquid,
toxic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous
materials, Technical Name Required, Potential Inhalation
Hazard (Special Provision 5).UN2783 Organophosphorus
pesticides, solid, toxic, Hazard Class: 6.1; Labels:
6.1-Poisonous materials. UN3018 Organophosphorus pesticides,
liquid, toxic, Hazard Class: 6.1; Labels: 6.1-
Poisonous materials.
Inkompatibilitäten
Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,
bromine, fluorine, etc.); contact may cause fires or
explosions. Keep away from alkaline materials, strong bases,
strong acids, oxoacids, epoxides. Strong oxidizers may cause
release of toxic phosphorus oxides. Organophosphates, in
the presence of strong reducing agents such as hydrides,
may form highly toxic and flammable phosphine gas. Keep
away from alkaline materials. Attacks some plastics, rubbers,
and coatings. Rapidly hydrolyzed by alkalis.
Waste disposal
Consult with environmental
regulatory agencies for guidance on acceptable disposal
practices. Generators of waste containing this contaminant
(≥100 kg/mo) must conform with EPA regulations
governing storage, transportation, treatment, and waste
disposal. In accordance with 40CFR165, follow recommendations
for the disposal of pesticides and pesticide
containers. Must be disposed properly by following package
label directions or by contacting your local or federal
environmental control agency, or by contacting your
regional EPA office. One manufacturer recommends the
use of a detergent in a 5% trisodium phosphate solution
for parathion disposal and cleanup problems. For parathion
disposal in general, however, the recommended
method is incineration (816°C, 0.5 second minimum for
primary combustion; 1204°C, 1.0 second for secondary
combustion) with adequate scrubbing and ash disposal
facilities.
Aphamite Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
