MIBEFRADIL
- CAS No.
- 116666-63-8
- Chemical Name:
- MIBEFRADIL
- Synonyms
- CS-1455;MIBEFRADIL;(1s-cis)-orid;ro40-5967/001;Mibefradil HCl;Mibefradil 2HCl;Mibefradil diHCl;Ro 40-5967 hydrate;MIBEFRADIL USP/EP/BP;Mibefradil(Ro 40-5967)
- CBNumber:
- CB6503891
- Molecular Formula:
- C29H40Cl2FN3O3
- Molecular Weight:
- 568.5506032
- MDL Number:
- MFCD11044451
- MOL File:
- 116666-63-8.mol
- MSDS File:
- SDS
Melting point | 128℃ |
---|---|
storage temp. | under inert gas (nitrogen or Argon) at 2-8°C |
solubility | H2O: 24 mg/mL, soluble |
pka | 4.8; 5.5(at 25℃) |
form | solid |
color | white |
Stability | Hygroscopic |
FDA UNII | 842TUP3PQ8 |
ATC code | C08CX01 |
SAFETY
Risk and Safety Statements
Symbol(GHS) | GHS07 |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
Signal word | Warning | |||||||||
Hazard statements | H302 | |||||||||
Precautionary statements | P280-P305+P351+P338 | |||||||||
WGK Germany | 3 | |||||||||
RTECS | AI8977250 | |||||||||
Toxicity | LD50 in mice, rats (mg/kg): 35, 23 i.v.; >800, >800 orally (Clozel) | |||||||||
NFPA 704 |
|
MIBEFRADIL price More Price(25)
Manufacturer | Product number | Product description | CAS number | Packaging | Price | Updated | Buy |
---|---|---|---|---|---|---|---|
Sigma-Aldrich | M5441 | Mibefradil dihydrochloride hydrate ≥98% (HPLC), powder | 116666-63-8 | 5mg | $172 | 2024-03-01 | Buy |
Sigma-Aldrich | M5441 | Mibefradil dihydrochloride hydrate ≥98% (HPLC), powder | 116666-63-8 | 25mg | $593 | 2024-03-01 | Buy |
Cayman Chemical | 15037 | Mibefradil (hydrochloride) ≥95% | 116666-63-8 | 5mg | $106 | 2024-03-01 | Buy |
Cayman Chemical | 15037 | Mibefradil (hydrochloride) ≥95% | 116666-63-8 | 10mg | $187 | 2024-03-01 | Buy |
Cayman Chemical | 15037 | Mibefradil (hydrochloride) ≥95% | 116666-63-8 | 25mg | $440 | 2024-03-01 | Buy |
MIBEFRADIL Chemical Properties,Uses,Production
Description
Posicor was launched in Argentina, Azerbaijan, Brazil, the Chile, Czech Republic, Denmark, Germany, Ireland, Kazakhstan, the Netherlands, Norway, Peru, the Philippines, Switzerland, Thailand, Turkmenistan, the UK, the US and Venezuela for use in hypertension. It can be assembled in five steps from 4-(1-benzyloxy-Nmethylformamido) butyric acid with o-phenylenediamine and isobutylchloroformate. Posicor binds to calcium channels in a manner that overlaps the Verapamil, SR-33557 and Diltiazem binding site without effecting the dihydropyridine binding site. Thus it blocks a wide variety of calcium channels with selectivity for T-type followed sequentially by L-type. There is also some calcium agonist activity along with sodium and potassium channel activity. It is chemically distinct from the other calcium antagonists (first member of a new catagory of tetralol calcium antagonists). It has the ability to lower heart rate with no negative inotropic effects and is as effective as Amlodipine and more effective than Diltiazem for the treatment of mild to moderate hypertension. Serious drug interactions are possible because Posicor inhibits both CYP2D6 and CYP3A4.
Originator
Roche (Switzerland)
Uses
Vasodilator.
Uses
Mibefradil has been used as a T-type calcium channel blocker in various cells. It has also been used to reduce apoptosis of retinal ganglion cells (RGC) in EphB2-Fc.
Manufacturing Process
To the solution of 5.35 g (28 mmol) [3-(1H-benzimidazol-2-
yl)propyl]methylamine in 12.5 mL toluene was added by syringe 12.5 mL
(11.42 g, 114 mmol) isopropenyl acetate. The reaction mixture was heated to
reflux temperature, and stirred at that temperature for 1.75 hours, with
reaction completion monitored by thin-layer chromatography (silica gel,
eluting with 70% ethyl acetate/30% methanol). The product, N-[3-(1Hbenzimidazol-2-yl)propyl]-N-methylacetamide, was obtained in quantitative
yield.
Under a dry nitrogen atmosphere, a 2.5 molar solution of butyl lithium in
hexane, 8.4 mL (21 mmol) was added by syringe to 20 mL pentane. The
solution was cooled to 0°C and 2.75 mL (2.13 g, 21 mmol) diisopropylamine
was added by syringe over six min. The solution was warmed to 25°C and
stirred for three hours, then volatiles were removed in vacuo. THF, 20 mL,
was added via syringe to the residue, and the resulting yellow solution cooled
to 0°C. A solution of 2.42 g (10.5 mmol) N-[3-(1H-benzimidazol-2-yl)propyl]-
N-methylacetamide in 10 mL THF was added by syringe over 9 min. The
yellow solution was stirred for 15 min, then cooled to -78°C. (S)-6-Fluoro-1-
isopropyl-3,4-dihydro-1H-naphthalen-2-one, 2.166 g, 87.2% pure (97.6:2.4
S:R), in 2 mL toluene was added by syringe over 12 min, and a further 2 mL
toluene was used to complete the transfer. After stirring for two hours, the
viscous yellow mixture was added to 50 mL water at less than 10°C. The
suspension that formed was extracted with diethyl ether; and the extracts
were dried over anhydrous magnesium sulfate, filtered, and concentrated in
vacuo to afford 3.74 g of impure (1S,2S)-N-[3-(1H-benzimidazol-2-yl)propyl]-
2-(6-fluoro-2-hydroxy-1-isopropyl-1,2,3,4-tetrahydronaphthalen-2-yl)-N-
methylacetamide as a yellow foam. The foam was recrystallized from toluene,
yield of a colorless solid 2.69 g, melting point 132-138°C. This material may
be recrystallized a second time from toluene to remove residual (S)-6-fluoro-
1-isopropyl-3,4-dihydro-1H-naphthalen-2-one if necessary.
(1S,2S)-N-[3-(1H-Benzimidazol-2-yl)propyl]-2-(6-fluoro-2-hydroxy-1-
isopropyl-1,2,3,4-tetrahydronaphthalen-2-yl)-N-methylacetamidemay be
synthesized by another method:
To the mixture 22.7 g (0.54 mol) dry lithium chloride and 100 mL THF at -
15°C was added 160 mL 2 molar lithium diisopropylamide (0.32 mol) in
heptane/THF/ethylbenzene was added. Then a solution of 36.6 g (0.16 mol)
N-[3-(1H-benzimidazol-2-yl)-propyl]-N-methylacetamide in 140 mL toluene
was added, the solution was stirred for 2 hours, and a further 155 mL toluene
was added. (S)-6-Fluoro-1-isopropyl-3,4-dihydro-1H-naphthalen-2-one (29.9
g, 0.15 mol), in 15 mL toluene was added. After stirring at -10°C for 4 hours,
the resulting solution was added to 200 mL ice water. The pH of the resulting
mixture was adjusted to 7-8 by addition of a 71 g concentrated hydrochloric
acid. The organic layer washed with water, then the solvents removed under
reduced pressure to give 96 g of (1S,2S)-N-[3-(1H-benzimidazol-2-yl)propyl]-
2-(6-fluoro-2-hydroxy-1-isopropyl-1,2,3,4-tetrahydronaphthalen-2-yl)-Nmethylacetamide as a brown oil. The product was crystallysed from toluene,
yield 45.3 g.
(1S,2S)-N-[3-(1H-Benzimidazol-2-yl)propyl]-2-(6-fluoro-2-hydroxy-1-
isopropyl-1,2,3,4-tetrahydronaphthalen-2-yl)-N-methylacetamide,20.22 g
(45.7 mmol), dissolved in 200 mL toluene at 40°C, was added by cannula
over 40 min at 0°C to a suspension of sodium bis(2-methoxyethoxy)aluminum
hydride in toluene, 40 mL (41.44 g suspension, 26.94 g sodium bis(2-
methoxyethoxy)aluminum hydride, 133 mmol). The mixture was stirred at
0°C for 15 min, then at 35-40°C for 3 hours. The mixture was cooled to 25°C
then added carefully to 70 g sodium hydroxide in 140 g ice. The resulting
suspension was warmed to 25°C over 30 min, and the phases were separated.
The aqueous phase was extracted with toluene; and the organic phase was
washed twice with 10% aqueous sodium hydroxide, once with water, then
once with saturated brine. The toluene phase was dried and concentrated in
vacuo to afford 20.61 g of (1S,2S)-2-[2-{[3-(1H-benzimidazol-2-
yl)propyl]methylmethylamino}ethyl]-6-fluoro-1-isopropyl-1,2,3,4-
tetrahydronaphthalen-2-ol as a colorless foam.
To the mixture of 41.0 g (1S,2S)-2-[2-{[3-(1H-benzimidazol-2-
yl)propyl]methylmethylamino}ethyl]-6-fluoro-1-isopropyl-1,2,3,4-
tetrahydronaphthalen-2-ol, 240 mL water, and 240 mL toluene were added
22.4 g potassium hydroxide, and the mixture heated to 45-50°C for one hour.
The resulting two-phase mixture was separated. To the organic phase was
added 39.4 g (4.0 eq.) potassium carbonate sesquihydrate; then a solution of
21.0 g (17.7 mL, 3.25 eq.) methoxyacetyl chloride in 33 mL toluene was
added over two hours at 25-30°C, and the resulting mixture stirred for an
additional 30 min. Water, 200 mL, was added to quench the reaction. The
organic phase, containing mibefradil as the free base was added an ethanol.
To the stirred mixture of mibefradil and ethanol was added at 20°C a solution
of 4.4 g of hydrogen chloride in 44.6 mL (35.0 g) ethanol. The mixture was
heated to 50°C and 1.0 mL water was added, followed by a solution of 3.4 mL
water in 332 mL methyl tert-butyl ether over one hour. The mixture was stirred for 3 hours. Mibefradil dihydrochloride crystals was seeded. A solution
of 0.6 mL water in 65 mL methyl tert-butyl ether was added over one hour,
and the mixture aged for a further 1.5 hours. The mixture was then cooled,
and the resulting slurry of mibefradil dihydrochloride was filtered; yield 95%.
brand name
Posicor (Hoffmann-LaRoche).
Therapeutic Function
Coronary vasodilator
Biochem/physiol Actions
Mibefradil is a tetralol derivative and nondihydropyridine calcium channel blocker. It blocks long-type (L-type) calcium channels. It blocks mildly the Purkinje-type (P-type) calcium channels in Purkinje neurons.
storage
-20°C
MIBEFRADIL Preparation Products And Raw materials
Raw materials
Preparation Products
MIBEFRADIL Suppliers
Supplier | Tel | Country | ProdList | Advantage | |
---|---|---|---|---|---|
BOC Sciences | +1-631-485-4226 | inquiry@bocsci.com | United States | 19553 | 58 |
TargetMol Chemicals Inc. | +1-781-999-5354 +1-00000000000 | marketing@targetmol.com | United States | 19892 | 58 |
Shaanxi Dideu Medichem Co. Ltd | +86-029-89586680 +86-18192503167 | 1026@dideu.com | China | 7730 | 58 |
Baoji Guokang Bio-Technology Co., Ltd. | 0917-3909592 13892490616 | gksales1@gk-bio.com | China | 9316 | 58 |
Sinoway Industrial co., ltd. | 0592-5800732; +8613806035118 | xie@china-sinoway.com | China | 988 | 58 |
Alfa Chemistry | Info@alfa-chemistry.com | United States | 24072 | 58 | |
InvivoChem | +1-708-310-1919 +1-13798911105 | sales@invivochem.cn | United States | 6393 | 58 |
Wuhan Topule Biopharmaceutical Co., Ltd | +8618327326525 | masar@topule.com | China | 8474 | 58 |
LEAPCHEM CO., LTD. | +86-852-30606658 | market18@leapchem.com | China | 43348 | 58 |
Aladdin Scientific | +1-+1(833)-552-7181 | sales@aladdinsci.com | United States | 57511 | 58 |
Supplier | Advantage |
---|---|
BOC Sciences | 58 |
TargetMol Chemicals Inc. | 58 |
Shaanxi Dideu Medichem Co. Ltd | 58 |
Baoji Guokang Bio-Technology Co., Ltd. | 58 |
Sinoway Industrial co., ltd. | 58 |
Alfa Chemistry | 58 |
InvivoChem | 58 |
Wuhan Topule Biopharmaceutical Co., Ltd | 58 |
LEAPCHEM CO., LTD. | 58 |
Aladdin Scientific | 58 |
View Lastest Price from MIBEFRADIL manufacturers
Image | Update time | Product | Price | Min. Order | Purity | Supply Ability | Manufacturer | |
---|---|---|---|---|---|---|---|---|
2021-07-13 | Mibefradil dihydrochloride
116666-63-8
|
US $15.00-10.00 / KG | 1KG | 99%+ HPLC | Monthly supply of 1 ton | Zhuozhou Wenxi import and Export Co., Ltd | ||
2021-07-10 | Mibefradil dihydrochloride
116666-63-8
|
US $15.00-10.00 / KG | 1KG | 99%+ HPLC | Monthly supply of 1 ton | Zhuozhou Wenxi import and Export Co., Ltd | ||
2020-05-12 | Mibefradil
116666-63-8
|
US $0.00-0.00 / KG | 1KG | 99.0% | 500 MT | Shaanxi Dideu Medichem Co. Ltd |
- Mibefradil dihydrochloride
116666-63-8
- US $15.00-10.00 / KG
- 99%+ HPLC
- Zhuozhou Wenxi import and Export Co., Ltd
- Mibefradil dihydrochloride
116666-63-8
- US $15.00-10.00 / KG
- 99%+ HPLC
- Zhuozhou Wenxi import and Export Co., Ltd
- Mibefradil
116666-63-8
- US $0.00-0.00 / KG
- 99.0%
- Shaanxi Dideu Medichem Co. Ltd