CHLOROSILANE

CHLOROSILANE Structure
CAS No.
13465-78-6
Chemical Name:
CHLOROSILANE
Synonyms
SiH3Cl;chloro-silan;CHLOROSILANE;chlorosilicon;Silane, chloro-;Trihydridesilicon chloride;Silicon trihydride chloride;chlorosilanes,corrosive,n.o.s.;chlorosilanes,corrosive,flammable,n.o.s.;chlorosilanes,water-reactive,flammable,corrosive,n.o.s.
CBNumber:
CB9741883
Molecular Formula:
ClH3Si
Molecular Weight:
66.56
MOL File:
13465-78-6.mol
MSDS File:
SDS
Modify Date:
2024/7/8 15:51:14

CHLOROSILANE Properties

Melting point -118°C
Boiling point -30,4°C
Density 1,145 g/cm3
Flash point -90°C (-133°F)
form colorless gas
Specific Gravity 1.145
color colorless
Hydrolytic Sensitivity 10: reacts extremely rapidly with moisture and oxygen - may be pyrophoric - sealed system required
EPA Substance Registry System Silane, chloro- (13465-78-6)

CHLOROSILANE Chemical Properties,Uses,Production

Chemical Properties

colorless gas; enthalpy of vaporization 21kJ/mol; entropy of vaporization 82.8kJ/(mol·K) [CIC73] [CRC10]

General Description

Chlorosilanes are a class of liquids that range in color from clear colorless to light yellow colored. A clear to light yellow liquid. Slightly more dense than water. Contact may burn skin, eyes and mucous membranes. May be toxic by ingestion, inhalation, and skin absorption. Used to make other chemicals.

Air & Water Reactions

Highly flammable. Based on the properties of similar materials, there is the possibility that the reaction of CHLOROSILANE with water may be vigorous or violent. Products of the reaction include hydrogen chloride. The reaction generates heat and this heat may be sufficient to ignite the product. The chlorosilicon hydrides(ClxSiHy) are spontaneously flammable in air, NFPA 1991.

Reactivity Profile

Chlorosilanes are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.

Health Hazard

Highly toxic: contact with water produces toxic gas, may be fatal if inhaled. Inhalation or contact with vapors, substance or decomposition products may cause severe injury or death. May produce corrosive solutions on contact with water. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control may cause pollution.

Fire Hazard

Produce flammable and toxic gases on contact with water. May ignite on contact with water or moist air. Some react vigorously or explosively on contact with water. May be ignited by heat, sparks or flames. May re-ignite after fire is extinguished. Some are transported in highly flammable liquids. Containers may explode when heated. Runoff may create fire or explosion hazard.

Synthesis

In order to obtain SiHCl3 as the principal product, the best way is to react Si with HCl in the presence of copper. A porcelain boat is filled with finely powdered silicon, which has been purified by boiling with hydrochloric acid and dilute hydrofluoric acid. About 10% CuCl2 is mixed in with the silicon. The boat is placed in a Pyrex glass tube fitted with an adapter and a condenser, as described in the preparation of SiCl4. In this case, however, the end of the condenser should extend into the middle of the distilling flask. The apparatus is first carefully heated. Hydrogen chloride gas is produced from NaCl and HaSO4, without addition of hydrochloric acid, since it must be absolutely dry. The furnace around the tube which contains the boat is heated to 300°C and a slow stream of HCl is introduced. The receiver is cooled with acetone-Dry Ice mixture. Finally, the crude product is distilled directly from the receiver. The first fraction is HCl. The SiHCl3 comes over at 36.5°C. With a careful fractionation of the forerun, SiH3Cls may also be recovered. The yield of SiHCl3 is about 50%. In order to improve the yield of SiH3Cla, it is recommended that hydrogen be added to the HCl in the ratio of HS:HC1 = 4:1.

CHLOROSILANE Preparation Products And Raw materials

Raw materials

Preparation Products

Global( 22)Suppliers
Supplier Tel Country ProdList Advantage Inquiry
Henan Tianfu Chemical Co.,Ltd. +86-0371-55170693 +86-19937530512 China 21675 55 Inquiry
ATK CHEMICAL COMPANY LIMITED +undefined-21-51877795 China 32760 60 Inquiry
WinWin Chemical CO., Limited +86-0577-64498589 +8615325081899 China 14198 58 Inquiry
Dayang Chem (Hangzhou) Co.,Ltd. 571-88938639 +8617705817739 China 52861 58 Inquiry
ShanDong Look Chemical Co.,Ltd. +8617653113219 China 2739 58 Inquiry
PT CHEM GROUP LIMITED +86-85511178 +86-85511178 China 35451 58 Inquiry
GIHI CHEMICALS CO.,LIMITED +8618058761490 China 49999 58 Inquiry
ABCR GmbH & CO. KG 49 721 95061 0 Germany 6846 75 Inquiry
Hubei Qifei Pharmaceutical Chemical Co., Ltd 027-59322506 18071128681 China 9978 58 Inquiry
Hubei Chenghai Chemical Co., Ltd 027-59220433 18327245847 China 9971 58 Inquiry
CHLOROSILANE Silicon trihydride chloride Trihydridesilicon chloride Silane, chloro- chloro-silan chlorosilanes,corrosive,flammable,n.o.s. chlorosilanes,corrosive,n.o.s. chlorosilanes,water-reactive,flammable,corrosive,n.o.s. SiH3Cl chlorosilicon 13465-78-6 ClH3Si H3ClSi