ジエチル水素アルミニウム
安全性情報
- リスクと安全性に関する声明
- 危険有害性情報のコード(GHS)
RIDADR |
3076 |
|
|
国連危険物分類 |
4.2 |
|
|
容器等級 |
I |
|
|
絵表示(GHS) |
|
注意喚起語 |
|
危険有害性情報 |
コード |
危険有害性情報 |
危険有害性クラス |
区分 |
注意喚起語 |
シンボル |
P コード |
H250 |
空気に触れると自然発火 |
自然発火性液体;自然発火性固体 |
1 |
危険 |
|
P210, P222, P280, P302+P334,P370+P378, P422 |
H260 |
水に触れると自然発火するおそれのある可燃性 /引火性ガスを発生 |
水反応可燃性化学品 |
1 |
危険 |
|
P223, P231+P232, P280, P335+ P334,P370+P378, P402+P404, P501 |
H314 |
重篤な皮膚の薬傷?眼の損傷 |
皮膚腐食性/刺激性 |
1A, B, C |
危険 |
|
P260,P264, P280, P301+P330+ P331,P303+P361+P353, P363, P304+P340,P310, P321, P305+ P351+P338, P405,P501 |
|
注意書き |
P223 |
激しい反応と火災の発生の危険があるため、水と接 触させないこと。 |
P260 |
粉じん/煙/ガス/ミスト/蒸気/スプレーを吸入しないこ と。 |
P264 |
取扱い後は皮膚をよく洗うこと。 |
P264 |
取扱い後は手や顔をよく洗うこと。 |
P280 |
保護手袋/保護衣/保護眼鏡/保護面を着用するこ と。 |
P301+P330+P331 |
飲み込んだ場合:口をすすぐこと。無理に吐かせ ないこと。 |
P303+P361+P353 |
皮膚(または髪)に付着した場合:直ちに汚染された衣 類をすべて脱ぐこと/取り除くこと。皮膚を流水/シャワー で洗うこと。 |
P304+P340 |
吸入した場合:空気の新鮮な場所に移し、呼吸しやすい 姿勢で休息させること。 |
P305+P351+P338 |
眼に入った場合:水で数分間注意深く洗うこと。次にコ ンタクトレンズを着用していて容易に外せる場合は外す こと。その後も洗浄を続けること。 |
P310 |
ただちに医師に連絡すること。 |
P321 |
特別な処置が必要である(このラベルの... を見よ)。 |
P363 |
汚染された衣類を再使用す場合には洗濯をすること。 |
P405 |
施錠して保管すること。 |
P501 |
内容物/容器を...に廃棄すること。 |
|
ジエチル水素アルミニウム 価格
メーカー |
製品番号 |
製品説明 |
CAS番号 |
包装 |
価格 |
更新時間 |
購入 |
ジエチル水素アルミニウム 化学特性,用途語,生産方法
調製方法
The ether complex of diethylaluminum chloride is prepared first by adding dropwise one-half mole of AlCl3, dissolved in some ether, to one mole of Al(C2H5) 3·O(C2H5)2. When the evolution of heat ceases, the excess solvent is evaporated, and the Al(C2H5)2Cl etherate is distilled in a vacuum. A 76 -g portion of this product is diluted with 120 ml of absolute ether and placed in a 500-ml, three-neck flask, which has been flushed with dry nitrogen. A suspension of LiH in ether (62 ml, 7 M in LiH) is prepared in a dropping funnel under a nitrogen blanket and allowed to flow into the flask. Lithium chloride separates, and the reaction mixture boils. Toward the end of the reaction, stirring is applied, and the mixture is heated to 40°C for 15 minutes. The LiCl rapidly precipitates when the flask is allowed to cool. The precipitate is washed with a small volume of ether, which is then evaporated in an aspirator vacuum, the last traces being removed at 50°C. The residual Al(C3Hs)aH is distilled in a high vacuum, holding the flask in a bath maintained at 80°C or lower. It is collected in a receiver cooled to - 20°C.
ジエチル水素アルミニウム 上流と下流の製品情報
原材料
準備製品
ジエチル水素アルミニウム 生産企業
Global( 1)Suppliers
- 871-27-2
- diethylhydridoaluminium
- Aluminum, diethylhydro-
- diethylaluminium hydride
- Diethylhydridoaluminum
- Diethylhydrogen aluminum salt
- Hydridediethylaluminum
- ジエチルヒドリドアルミニウム
- ヒドリドジエチルアルミニウム
- 水素化ジエチルアルミニウム
- ジエチル水素アルミニウム