| Melting point: |
-85 °C |
| Boiling point: |
124-125 °C(lit.) |
| Density |
0.965 g/mL at 25 °C(lit.) |
| vapor density |
2.62 (vs air) |
| vapor pressure |
6.17 mm Hg ( 20 °C) |
| refractive index |
n20/D 1.402(lit.) |
| Flash point: |
115 °F |
| storage temp. |
Store at +5°C to +30°C. |
| solubility |
Very soluble in acetone, dimethylsulfoxide, and 95% ethanol (quoted, Keith and Walters, 1992).
Miscible with N,N-dimethylformamide, ether, and glycerol (Windholz et al., 1983). |
| pka |
15.7(at 25℃) |
| form |
Liquid |
| color |
green cap |
| Relative polarity |
1 |
| PH Range |
5- 7 at 25 °C |
| Odor |
Mild ethereal. |
| explosive limit |
2.5-20%(V) |
| Water Solubility |
SOLUBLE |
| λmax |
λ: 213 nm Amax: 1.00
λ: 240 nm Amax: 0.20
λ: 260 nm Amax: 0.05
λ: 300-400 nm Amax: 0.01 |
| Merck |
14,6038 |
| BRN |
1731074 |
| Henry's Law Constant |
(x 10-2 atm?m3/mol):
4.41, 3.63, 11.6, 3.09, and 3.813 at 10, 15, 20, 25, and 30 °C, respectively (EPICS, Ashworth et
al., 1988) |
| Dielectric constant |
15.8（20℃） |
| Exposure limits |
TLV-TWA skin 5 ppm (15.5 mg/m3)
(ACGIH), 25 ppm (77.5 mg/m3) (OSHA). |
| Stability: |
Stable, but contact with air may lead to the formation of explosive peroxides. A peroxide test should be carried out before this material is used if it has been exposed to air for some time, especially if it is to be purified by distillation. Contact with strong oxidizing agents may cause fire or explosion. Incompatible with strong bases, ac |
| InChIKey |
XNWFRZJHXBZDAG-UHFFFAOYSA-N |
| LogP |
-0.77 at 20℃ |
| CAS DataBase Reference |
109-86-4(CAS DataBase Reference) |
| NIST Chemistry Reference |
Ethanol, 2-methoxy-(109-86-4) |
| EPA Substance Registry System |
2-Methoxyethanol (109-86-4) |