Diisopropylamine manufacturers and suppliers in india

Diisopropylamine

Properties

Melting point:: -61 °C (lit.)

Boiling point:: 84 °C (lit.)

Density: 0.722 g/mL at 25 °C (lit.)

vapor density: 3.5 (vs air)

vapor pressure: 50 mm Hg ( 20 °C)

refractive index: n20/D 1.392(lit.)

Flash point:: 1.4 °F

storage temp.: Store below +30°C.

solubility: 100 g/L (20°C)

pka: 11.05(at 25℃)

form: Liquid

color: Clear colorless

PH: 11.8 (6g/l, H2O, 20℃)

Odor: Amine.

explosive limit: 1.1-7.1%(V)

Water Solubility: 100 g/L (20 ºC)

Merck: 14,3196

BRN: 605284

Exposure limits: NIOSH REL: TWA 5 ppm (20 mg/m³), IDLH 200 ppm; OSHA PEL: TWA 5 ppm; ACGIH TLV: TWA 5 ppm (adopted).

Dielectric constant: 3.04

Stability:: Stable. Flammable. Incompatible with strong oxidizing agents. May react violently with strong acids or oxidizers. Air sensitive.

InChIKey: UAOMVDZJSHZZME-UHFFFAOYSA-N

LogP: 0.4 at 20℃

Safety Information

Symbol(GHS): GHS02,GHS05,GHS06

Signal word: Danger

Hazard statements: H225-H302-H314-H331-H335-H412

Precautionary statements: P210-P273-P280-P303+P361+P353-P304+P340+P310-P305+P351+P338

Hazard Codes: F,C

Risk Statements: 11-20/22-34

Safety Statements: 16-26-36/37/39-45

OEB: A

OEL: TWA: 5 ppm (20 mg/m3) [skin]

RIDADR: UN 1158 3/PG 2

WGK Germany: 2

RTECS: IM4025000

Autoignition Temperature: 599 °F

Hazard Note: Highly Flammable/Corrosive/Harmful

TSCA: Yes

HS Code: 2921 19 99

HazardClass: 3

PackingGroup: II

Toxicity: LD50 orally in rats: 0.77 g/kg (Smyth)

IDLA: 200 ppm

Use

Diisopropylamine is used as a precursor to prepare lithium diisopropylamide and sulfenamides, which are used in rubber vulcanization. It is also involved in the synthesis of N,N-Diisopropylethylamine (Hünigs base) obtained by alkylation with diethyl sulfate. Diisopropylammonium bromide is a bromide salt of DIPA used as an inert alternative to barium titanate. It is widely used as solvent as well as an intermediate in the the synthesis of pharmaceuticals, dyes, mineral flotation agents and emulsifiers.