Dipotassium ethylenediaminetetraacetate NEW

【Product name】Dipotassium ethylenediaminetetraacetate dihydrate

To

【Packing specifications】Plastic bottle, 500g/bottle

To

[Product performance] White crystalline powder, odorless, easily soluble in water, easy to absorb moisture, molecular weight is 404.6, pH value is 4.8 ± 1 (5% aqueous solution, g/ml), water solubility ≥ 60% (g/ml, 25 ℃). Stable at room temperature. The main content of the company's EDTA dipotassium ≥99.0%. For other indicators, please refer to the product test report.

To

[Scope of application] EDTA salt can protect the cell components of the blood, does not affect the white blood cell count and size, has the least impact on the morphology of red blood cells, and can inhibit the aggregation of platelets, which is suitable for general hematology tests. Except for the separation test of platelets, it is not suitable for blood coagulation test and platelet kinetic energy test, nor is it suitable for calcium ion, potassium ion, sodium ion, iron ion, alkaline phosphatase, creatine kinase and leucine aminopeptidase Determination and PCR test. To

The International Committee for Standardization in Hematology (ICSH) recommends that EDTA dipotassium is the first choice for blood count and classification as an anticoagulant. Compared with EDTA tripotassium, its solubility is lower and its anticoagulation speed is slower.

To

【Precautions】

The key to the preparation of whole blood test specimens is that the anticoagulation is sufficient and complete, so the blood must be inverted 5 to 8 times as soon as possible after blood sampling to prevent the formation of small blood clots. Especially when the blood sampling environment temperature is higher than 25°C, the blood and EDTA dipotassium must be thoroughly mixed in time, otherwise it will easily cause blood coagulation or local coagulation.

EDTA salt anticoagulation is not irreversible anticoagulation, so the test should be completed within 24h after EDTA anticoagulation test tube blood collection, otherwise it may cause errors in the test results. The storage time of EDTA salt anticoagulant blood samples is: the white blood cell count can be stored for 48 hours at 4°C, and no more than 24 hours at 23°C. The platelet count can be stored for 24 hours at 4℃.

Anticoagulation requires a sufficient amount of EDTA, but excessive EDTA may cause changes in blood cell morphology, and it is particularly important to accurately control the amount of EDTA dipotassium added.

EDTA salt can inhibit platelet aggregation, but it cannot completely prevent platelet aggregation. In a small number of patients, blood platelets are lower than normal in routine blood tests, which may be caused by platelet pseudo-aggregation. In this case, sodium citrate anticoagulant can be used for platelet test verification. This situation has nothing to do with the quality of EDTA anticoagulant, but with the patient's blood characteristics and clinical testing operations.

EDTA dipotassium can be used in combination with sodium fluoride and separating gel. When EDTA dipotassium/sodium fluoride is combined, add 1.2-2.0mg of dipotassium per ml of blood and add 2-4mg of sodium fluoride. When EDTA dipotassium/separation gel is combined, the dosage of dipotassium does not change, and the amount of separation gel added to each test tube is 0.8-1.2g. When used with separation gel, anticoagulation effect, tube wall siliconization, centrifugal conditions, and separation gel quality will affect the blood separation effect. It is recommended to be used in conjunction with the separation gel produced by our company to obtain high-quality plasma samples.

.Suggestion for sterilization by irradiation after adding to blood collection tube: use γ-ray irradiation with a dose of 8-25kGy. The radiation dose can be determined by the initial colony count.

To

【Warning and Prevention】

It is forbidden to use EDTA dipotassium when there are impurities, foreign bodies, abnormal odors, colors, severe moisture absorption, and beyond the expiration date.

When the EDTA dipotassium solution appears turbid, do not continue to use it.

This product is a chemical reagent with strong corrosive properties. It is forbidden to touch it directly with hands. When spilled on the skin, rinse with plenty of water. If it splashes into the eyes, you can immediately rinse with plenty of water. In an emergency, you should immediately send it to the hospital for examination and treatment.

To

[Storage conditions] This product can be sealed and stored in a cool and dry place, protected from light and protected from moisture. The aqueous solution of this product can be sealed and stored at room temperature under aseptic conditions. It is recommended that the aqueous solution of this product be used immediately after preparation, and do not store it in a solution state for a long time.

To

[Validity period] 3 years

Desheng is a veteran blood testing reagent company with 14 years of R&D and production experience, and has deep research on blood collection tube additives. Business friends in need of isoluminol can directly contact 18971041571 (same number on WeChat), and look forward to your inquiries!