Long term anti fog essence of swimming goggles NEW

Long term anti fog essence of swimming goggles

Product instruction

Model: AF5028

Components: Purified water, Acrylic resin, Anionic surfactant

Density: 1g/ml ( room temperature )

Shelf life: 2 years at room temperature

Standard:Q / HBC003-2024

Package: 10LB, 50LB

Characteristics: Water resistance, Chlorine-resistant liquid，

Water based, Safety

Product construction

1.Cleaning the lens, to ensure that no stains.

2.The anti-fog liquid is evenly coated on the surface of the lens. It can also be applied by smearing or dripping.

3.The lens can be dried naturally for 10-30min, if the temperature is below 20℃, it can be dried for 30-60min.Or dry with hot air for 10-30 seconds.

Competitive advantage

Industry pain point

▲Most of the anti-fog swimming mirrors actually swim 3-10 times, anti-fog will seriously affect the line of sight.

▲Most commercially available antifogging agents can only be used once, and are not resistant to water and chlorine liquid.

▲Some commercially available antifogging solvents are organic solvents such as ethanol or isopropanol, which are flammable, explosive and irritating.

Our advantage

★This product is resistant to water and chlorine after curing and can be reused.

★This product is waterborne emulsion, passed SGS test, no formaldehyde, no heavy metals, no skin irritation.

Application

[1] Please moisten the lens before each use to activate the anti-fog layer, which can keep your vision clear. [2] If the coating appears slightly white after drying, it is a normal phenomenon. Just moisten the lens to keep it transparent. [3] If the coating is too thick in some areas after drying, you can shake it in water (or the swimming pool) to remove excess anti-fog liquid.

Cautions

1.The effectiveness duration of the anti-fog coating may vary due to factors such as lens material, hot air temperature, drying time, drying temperature, drying duration, and application technique.

2.To clean the anti-fog agent, you can use neutral detergent or simply wipe it with warm water.

3.The anti-fog film has a certain level of water resistance, but it is not recommended to wash or touch it with water, as this may affect the effectiveness duration and transmittance of the anti-fog coating.

4.After the substrate is fog-treated, the appearance of rainbow colors or a few speckles is normal and is mainly caused by operating in an open environment. It does not affect the actual use effect.

5.Due to the wide variety of anti-fog substrates, this product may not be suitable for all transparent materials for fog prevention.

6.If discomfort occurs after accidental ingestion or contact, rinse the mouth or skin with water. If discomfort persists, seek medical attention immediately.