ChemicalBook >>1,1,2,2-Tetrahydroperfluorododecyl iodide>>1,1,2,2-Tetrahydroperfluorododecyl iodide(2043-54-1)

1,1,2,2-Tetrahydroperfluorododecyl iodide(2043-54-1)

1,1,2,2-Tetrahydroperfluorododecyl iodide(2043-54-1)
Product IdentificationBack to Contents
【Product Name】

1,1,2,2-Tetrahydroperfluorododecyl iodide
【Synonyms】

1-(2-Fluorophenyl)propan-2-one
2-Propanone, 1-(2-fluorophenyl)-
【CAS】

2836-82-0
【Formula】

C9H9FO
【Molecular Weight】

152.16
【EINECS】

220-627-5
【Beilstein/Gmelin】

2043541
Physical and Chemical PropertiesBack to Contents
【Appearance】

Clear liquid.
【Boiling Point】

47
【Density】

1.07 g/cm3
【Vapor Density】

5.25
【Refractive Index】

1.501 (20 C)
First Aid MeasuresBack to Contents
【Ingestion】

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
【Inhalation】

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration.
【Skin】

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
【Eyes】

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Handling and StorageBack to Contents
【Storage】

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
【Handling】

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards IdentificationBack to Contents
【Inhalation】

Aspiration may lead to pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
【Skin】

May cause irritation and dermatitis. May cause cyanosis of the extremities.
【Eyes】

May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
【Ingestion】

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
【Respirators】

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
【Exposure Effects】

Effects may be delayed.
Fire Fighting MeasuresBack to Contents
【Flash Point】

85
【Fire Fighting】

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Stability and ReactivityBack to Contents
【Stability】

Stable under normal temperatures and pressures.
【Incompatibilities】

Strong oxidizing agents, strong bases.
【Decomposition】

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride.
Company Name: Shangfluoro
Tel: 021-65170832 17301729617
Fax:
WebSite: www.flonclean.com
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: Energy Chemical
Tel: 021-021-58432009 400-005-6266
Fax: 021-58436166
WebSite: http://www.energy-chemical.com
Company Name: Wuhan Chemwish Technology Co., Ltd
Tel: 86-027-67849912
Fax: 86-027-87531808
WebSite: www.chemwish.com
Company Name: Shanghai Sinch Parmaceuticals Tech. Co. Ltd.
Tel: +86-21-54098501
Fax: +86-21-54096319
WebSite: www.sinch.com.cn
Company Name: Fuxin Hengtong Fluorine Chemicals Co., Ltd
Tel: 0418-2558700
Fax: 0418-2570603
WebSite: www.chemicalbook.com/ShowSupplierProductsList12528/0.htm
Company Name: Guangzhou Isun Pharmaceutical Co., Ltd
Tel: 020-39119399 18927568969
Fax: 020-39119999
WebSite: http://www.isunpharm.com