| Product Identification | Back to Contents | 【Product Name】
2-(tert-Butyl)-4,6-dimethylphenol | 【Synonyms】
2,4-Dimethyl-6-tert-butylphenol
2-Methyl-6-tert-butyl-p-cresol
6-(1,1-Dimethylethyl)-2,4-dimethylphenol
6-tert-Butyl-2,4-xylenol
Phenol, 2-(1,1-dimethylethyl)-4,6-dimethyl-
Topanol A | 【CAS】
1879-09-0 | 【Formula】
C12H18O | 【Molecular Weight】
178.3 | 【EINECS】
217-533-1 | 【RTECS】
ZE6825000 | 【RTECS Class】
Other | 【Beilstein/Gmelin】
2935417 |
| Physical and Chemical Properties | Back to Contents | 【Solubility in water】
Insoluble | 【Melting Point】
27 | 【Boiling Point】
249 | 【Vapor Pressure】
0.015 (25 C) | 【Density】
0.917 g/cm3 (20 C) | 【pKa/pKb】
12.00 (pKa) | 【Partition Coefficient】
4.09 | 【Heat Of Vaporization】
50.6 kJ/mol | 【Usage】
Antioxidant. | 【Refractive Index】
1.6186 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
Seek medical assistance. | 【Inhalation】
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. | 【Skin】
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. | 【Eyes】
Immediately flush with running water for at least 20 minutes. |
| Handling and Storage | Back to Contents | 【Storage】
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage. | 【Handling】
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. |
| Hazards Identification | Back to Contents | 【Ingestion】
See Inhalation. | 【Inhalation】
TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Effects of contact or inhalation may be delayed. | 【Skin】
Contact with molten substance may cause severe burns to skin and eyes. See Inhalation. | 【Eyes】
See Inhalation. | 【Hazards】
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. | 【UN (DOT)】
2430 |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
111 | 【Fire Fighting】
Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. Apply water from as far a distance as possible. Keep run-off water out of sewers and water sources. | 【Fire Potential】
Combustible material: may burn but does not ignite readily. |
| Stability and Reactivity | Back to Contents | 【Stability】
No data. | 【Incompatibilities】
Reacts as weak organic acids Incompatible with strong reducing substances such as hydrides, nitrides, alkali metals, and sulfides. | 【Combustion Products】
Fire may produce irritating, corrosive and/or toxic gases. |
|
| Company Name: |
J & K SCIENTIFIC LTD. |
| Tel: |
010-82848833 400-666-7788 |
| Fax: |
86-10-82849933 |
| WebSite: |
http://www.jkchemical.com |
|