ChemicalBook >>Benzyl chloromethyl ether>>Benzylchloromethyl ether(3587-60-8)

Benzylchloromethyl ether(3587-60-8)

Benzylchloromethyl ether(3587-60-8)
Product IdentificationBack to Contents
【Product Name】

Benzylchloromethyl ether
【Synonyms】

Benzyl chloromethyl ether
Benzyloxymethyl chloride
Chloromethyl benzyl ether
【CAS】

3587-60-8
【Formula】

C8H9ClO
【Molecular Weight】

156.61000000000001
【Beilstein/Gmelin】

1364034
【Beilstein Reference】

4-06-00-02252
Physical and Chemical PropertiesBack to Contents
【Appearance】

Yellow-green liquid.
【Solubility in water】

2.7 g/L (25 C)
【Melting Point】

-15
【Boiling Point】

207
【Vapor Pressure】

0.33 (25 C)
【Density】

1.126 g/cm3 (20 C)
【Partition Coefficient】

2.32
【Heat Of Vaporization】

42.52
【Refractive Index】

1.5264 (20 C)
First Aid MeasuresBack to Contents
【Ingestion】

If swallowed, wash out mouth with water provided person is conscious. Call a physician.
【Inhalation】

If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.
【Skin】

In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician.
【Eyes】

In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician.
Handling and StorageBack to Contents
【Storage】

Store at 2 - 8 C. Keep container tightly closed.
Hazards IdentificationBack to Contents
【Inhalation】

Material is irritating to mucous membranes and upper respiratory tract. Toxic if inhaled.
【Skin】

Causes skin irritation. May be harmful if absorbed through the skin.
【Eyes】

Causes severe eye irritation.
【Ingestion】

Harmful if swallowed.
【Hazards】

Stabilized and unstabilized benzyl chloride will undergo a rapid, exothermic polymerization reaction above 100 C This reaction occurs at much lower temperatures when species of iron are present. The gases generated during rapid polymerization will result in rapid build-up of dangerous pressure in closed vessels. Emits toxic fumes under fire conditions. Water hydrolyzes material liberating acidic gas which in contact with metal surfaces can generate flammable and/or explosive hydrogen gas.
【EC Risk Phrase】

22 23 37/38 41 45 48
【EC Safety Phrase】

26 39 45 53
【UN (DOT)】

2810
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing.
【Respirators】

Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator.
【Exposure Effects】

Symptoms of exposure may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. Inhalation may result in spasm, inflammation and edema of the larynx and bronchi, chemical pneumonitis, and pulmonary edema. Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin. This product is or contains a component that has been reported to be probably carcinogenic based on its IARC, OSHA, ACGIH, NTP, or EPA classification.
Fire Fighting MeasuresBack to Contents
【Flash Point】

91
【Fire Fighting】

Do not use water. Extinguish with carbon dioxide, dry chemical powder or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
【Fire Potential】

Combustible liquid.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Absorb on sand or vermiculite and place in closed containers for disposal. Ventilate area and wash spill site after material pickup is complete.
Stability and ReactivityBack to Contents
【Stability】

Material is moisture sensitive. Material contains a stabilizer.
【Incompatibilities】

Strong oxidizing agents, Strong bases, Iron and iron salts, Aluminum, Brass.
Transport InformationBack to Contents
【UN Number】

2810
【Hazard Class】

6.1
【Packing Group】

III
Company Name: Nanjing Kanglirui Biotechnology Co., Ltd.
Tel: +86-18626219813 +86-18626219813
Fax:
WebSite: https://www.chemicalbook.com/ShowSupplierProductsList31091/0.htm
Company Name: Haimen Ruiyi Medical Tech Co., LTD
Tel: 021-54718086
Fax: 021-54711707
WebSite: http://www.ruiyitech.cn
Company Name: Chongqing Xingcan Pharmaceutical Technology Co., Ltd.
Tel: 15523000485
Fax:
WebSite: http://www.starrymed.com
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 021-61259108 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: Beijing Donghualituo Techonlogy Development Co.,Ltd.
Tel: 010-88425576
Fax: (+86)-10-88425546
WebSite: www.dhltchem.com
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/