Product Identification | Back to Contents | 【Product Name】
Sodium 1-(3,4-dihydro-6-methyl-2,4-dioxo-2H-pyran-3-ylidene)ethanolate | 【Synonyms】
2-Acetyl-5-hydroxy-3-oxo, delta-lactone, sodium derivative Harven Prevan Sodium (Z)-1-(4-methyl-2,6-dioxocyclohex-3-enylidene)ethanolate Sodium 3-acetyl-6-methylpyran-3-ide-2,4-dione | 【CAS】
4418-26-2 | 【Formula】
C8H7NaO4 | 【Molecular Weight】
190.13 | 【EINECS】
224-580-1 | 【RTECS】
UP8225000 | 【RTECS Class】
Agricultural Chemical and Pesticide; Mutagen; Reproductive Effector; Primary Irritant | 【Beilstein/Gmelin】
4893653 | 【EC Index Number】
607-164-00-8 | 【EC Class】
Harmful |
Physical and Chemical Properties | Back to Contents | 【Appearance】
White powder. | 【Solubility in water】
330 g/L (20 C) | 【Melting Point】
280 - 285 | 【Usage】
In organic synth, as plasticizer, as fungicide & bactericide, in antienzyme toothpastes sodium dehydroacetic hydrate. |
First Aid Measures | Back to Contents | 【Ingestion】
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. | 【Inhalation】
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used. | 【Skin】
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. | 【Eyes】
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. |
Handling and Storage | Back to Contents | 【Storage】
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage. | 【Handling】
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. |
Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots. | 【Respirators】
Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. | 【Exposure Effects】
The toxicological properties of this material have not been investigated. | 【Poison Class】
4 |
Fire Fighting Measures | Back to Contents | 【Autoignition】
360 | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use agent most appropriate to extinguish fire. |
Accidental Release Measures | Back to Contents | 【Small spills/leaks】
If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. |
|
Company Name: |
J & K SCIENTIFIC LTD. |
Tel: |
010-82848833 400-666-7788 |
Fax: |
86-10-82849933 |
WebSite: |
http://www.jkchemical.com |
Company Name: |
Alfa Aesar |
Tel: |
400-6106006 |
Fax: |
021-67582001/03/05 |
WebSite: |
http://chemicals.thermofisher.cn |
Company Name: |
TAIYUAN RHF CO.,LTD. |
Tel: |
+86 351 7031519 |
Fax: |
+86 351 7031519 |
WebSite: |
www.rhfchem.com |
Company Name: |
Energy Chemical |
Tel: |
021-021-58432009 400-005-6266 |
Fax: |
021-58436166 |
WebSite: |
http://www.energy-chemical.com |
|