| Product Identification | Back to Contents | 【Product Name】
5-Bromo-1-pentene | 【Synonyms】
1-Bromo-4-pentene
5-Bromopent-1-ene | 【CAS】
1119-51-3 | 【Formula】
C5H9Br | 【Molecular Weight】
149.04 | 【EINECS】
214-281-4 | 【Beilstein/Gmelin】
506077 | 【Beilstein Reference】
3-01-00-00775 | 【EC Class】
flammable, irritant |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Colorless liquid. | 【Solubility in water】
Insoluble | 【Boiling Point】
126 | 【Vapor Pressure】
14 (25 C) | 【Density】
1.2547 g/cm3 (15 C) | 【Partition Coefficient】
2.85 | 【Heat Of Vaporization】
34.9 kJ/mol | 【Refractive Index】
1.4640 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. | 【Inhalation】
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | 【Skin】
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | 【Eyes】
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. |
| Handling and Storage | Back to Contents | 【Storage】
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Flammables-area. Refrigerator (approx 4 C). | 【Handling】
Use with adequate ventilation. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. |
| Hazards Identification | Back to Contents | 【Ingestion】
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. | 【Inhalation】
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Vapors may cause dizziness or suffocation. | 【Skin】
May cause skin irritation. | 【Eyes】
May cause eye irritation. | 【Hazards】
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. | 【EC Risk Phrase】
R 10 36/37/38 | 【EC Safety Phrase】
S 16 26 36 | 【UN (DOT)】
1993 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | 【Respirators】
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
31 | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Use agent most appropriate to extinguish fire. Do NOT use straight streams of water. | 【Fire Potential】
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors. |
| Stability and Reactivity | Back to Contents | 【Stability】
Stable under normal temperatures and pressures. | 【Incompatibilities】
Strong oxidizing agents. | 【Decomposition】
Carbon monoxide, carbon dioxide, hydrogen bromide. | 【Combustion Products】
Fire may produce irritating, corrosive and/or toxic gases. |
|
|