3-Methylaminopropionitrile(693-05-0)

Contents

Product Identification	Back to Contents
【Product Name】 3-Methylaminopropionitrile
【Synonyms】 3-(Methylamino)propionitrile 3-Methylaminopropanenitrile Methyl(2-cyanoethyl)amine N-Methyl-2-cyanoethylamine N-Methyl-N-(2-cyanoethyl)amine
【CAS】 693-05-0
【Formula】 C4H8N2
【Molecular Weight】 84.12
【EINECS】 211-740-0
【RTECS】 TZ4910000
【RTECS Class】 Other
【Beilstein/Gmelin】 1699160
【Beilstein Reference】 3-04-00-01264

Physical and Chemical Properties	Back to Contents
【Appearance】 Clear yellow liquid
【Solubility in water】 Very soluble
【Melting Point】 -21
【Boiling Point】 162
【Density】 0.9073 g/cm3 (20 C)
【pKa/pKb】 5.73
【Partition Coefficient】 -.1
【Refractive Index】 1.4342 (15 C)

First Aid Measures	Back to Contents
【Ingestion】 Get medical aid. Wash mouth out with water.
【Inhalation】 Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
【Skin】 Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
【Eyes】 Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Get medical aid.

Handling and Storage	Back to Contents
【Storage】 Store in a cool, dry place. Store in a tightly closed container.
【Handling】 Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.

Hazards Identification	Back to Contents
【Ingestion】 May be harmful if swallowed.
【Inhalation】 Harmful if inhaled. May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
【Skin】 May cause skin irritation. Harmful if absorbed through the skin.
【Eyes】 May cause eye irritation.

Exposure Controls/Personal Protection	Back to Contents
【Personal Protection】 Wear appropriate protective eyeglasses or chemical safety goggles, protective gloves and clothing to prevent exposure.
【Respirators】 Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
【Poison Class】 4

Fire Fighting Measures	Back to Contents
【Flash Point】 >112
【Fire Fighting】 Wear approved SCBA in full pressure-demand and full protective gear. In case of fire use water spray, dry chemical, carbon dioxide, or chemical foam.

Accidental Release Measures	Back to Contents
【Small spills/leaks】 Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container.

Stability and Reactivity	Back to Contents
【Disposal Code】 3
【Incompatibilities】 Acids, acid chlorides, anhydrides, oxidizing agents.
【Decomposition】 Nitrogen oxides, carbon monoxide, carbon dioxide.

Transport Information	Back to Contents
【HS Code】 2926 90 95

Company Name:	Hubei Guangao Biotechnology Co., Ltd
Tel:	027-027-59223056 18162699093
Fax:	027-59223056
WebSite:	www.guangaobio.com/

Company Name:	Creasyn Finechem(Tianjin) Co., Ltd.
Tel:	022-83946278 13820503911
Fax:	022-83945176
WebSite:	www.creasyn.com/

Company Name:	Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel:	021-61259108 18621169109
Fax:	86-21-61259102
WebSite:	https://www.meryer.com/cn/index/

Company Name:	Shanghai Rory Fine Chemical Co., Ltd
Tel:	0086-21-50702305
Fax:	0086-21-50704994
WebSite:	www.rorychem.com

Company Name:	TCI (Shanghai) Development Co., Ltd.
Tel:	021-67121386
Fax:	021-67121385
WebSite:	https://www.tcichemicals.com/CN/zh/

Company Name:	BeiJing Hwrk Chemicals Limted
Tel:	0757-86329057 18934348241
Fax:	010-89508210
WebSite:	www.hwrkchemical.com/

HomePage | Member Companies | Advertising | Contact us | Previous WebSite | MSDS | CAS Index | CAS DataBase | Privacy | Terms | About Us
All products displayed on this website are only for non-medical purposes such as industrial applications or scientific research, and cannot be used for clinical diagnosis or treatment of humans or animals. They are not medicinal or edible.
According to relevant laws and regulations and the regulations of this website, units or individuals who purchase hazardous materials should obtain valid qualifications and qualification conditions.