Product Identification | Back to Contents | 【Product Name】
Chloromethyltrimethylsilane | 【Synonyms】
(Trimethylsilyl)methyl chloride Chloro(trimethylsilyl)methane Silane CMM3 Trimethyl(chloromethyl)silane | 【CAS】
2344-80-1 | 【Formula】
C4H11ClSi | 【Molecular Weight】
122.67 | 【EINECS】
219-058-5 | 【Beilstein/Gmelin】
906705 | 【Beilstein Reference】
4-04-00-03877 | 【EC Class】
highly flammable, irritant |
First Aid Measures | Back to Contents | 【Ingestion】
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. | 【Inhalation】
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth respiration if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. | 【Skin】
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes. | 【Eyes】
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes). |
Handling and Storage | Back to Contents | 【Storage】
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. Store protected from moisture. | 【Handling】
Use only in a well ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep from contact with moist air and steam. Do not breathe vapors. |
Hazards Identification | Back to Contents | 【Inhalation】
Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause systemic effects. May cause burning sensation in the chest. | 【Skin】
Causes skin burns. May cause cyanosis of the extremities. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color. | 【Eyes】
Causes eye burns. May cause chemical conjunctivitis and corneal damage. | 【Ingestion】
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. Ingestion of large amounts may cause CNS depression. May cause systemic effects. | 【Hazards】
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. | 【EC Risk Phrase】
R 11 36/37/38 | 【EC Safety Phrase】
S 16 23 37/39 | 【UN (DOT)】
2924 |
Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | 【Respirators】
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. | 【Exposure Effects】
Effects may be delayed. |
Fire Fighting Measures | Back to Contents | 【Flash Point】
3 | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Water hydrolyzes material liberating acidic gas which in contact with metal surfaces can generate flammable and/or explosive hydrogen gas. Runoff to sewer may create fire or explosion hazard. Extinguishing media: Use water spray to cool fire-exposed containers. Water may be ineffective. Use carbon dioxide or dry chemical. Do NOT get water inside containers. Do NOT use straight streams of water. | 【Fire Potential】
Flammable/combustible material. May be ignited by heat, sparks or flames. |
Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. Do not get water inside containers. A vapor suppressing foam may be used to reduce vapors. Cover with dry earth, dry sand, or other non-combustible material followed with plastic sheet to minimize spreading and contact with water. |
Stability and Reactivity | Back to Contents | 【Disposal Code】
24 | 【Stability】
Stable under normal shipping and handling conditions. However, may decompose if exposed to moist air or water. | 【Incompatibilities】
Strong oxidizing agents, strong acids, strong bases, heat, moisture, water. | 【Decomposition】
Hydrogen chloride, carbon monoxide, carbon dioxide, silicon oxide. | 【Combustion Products】
Fire will produce irritating, corrosive and/or toxic gases. |
|
|