Acrylamide-Health Hazard and Toxicity
Sep 4,2019
Description
Acrylamide (or acrylic amide) is an organic compound with the chemical formula CH2=CHC(O)NH2. It is a white odorless solid, soluble in water and several organic solvents. It is produced industrially as a precursor to polyacrylamides, which find many uses as water-soluble thickeners and flocculation agents. It is highly toxic, likely to be carcinogenic,and partly for that reason it is mainly handled as an aqueous solution.
Health Hazard
The acute toxicity of acrylamide is moderate by ingestion or skin contact. Skin exposure leads to redness and peeling of the skin of the palms. Aqueous acrylamide solutions cause eye irritation; exposure to a 50% solution of acrylamide caused slight corneal injury and slight conjunctival irritation, which healed in 8 days. The chronic toxicity of acrylamide is high. Repeated exposure to ~2 mg/kg per day may result in neurotoxic effects, including unsteadiness, muscle weakness, and numbness in the feet (leading to paralysis of the legs), numbness in the hands, slurred speech, vertigo, and fatigue. Exposure to slightly higher repeated doses in animal studies has induced multisite cancers and reproductive effects, including abortion, reduced fertility, and mutagenicity. Acrylamide is listed in IARC Group 2B ("possible human carcinogen") and is classified as a "select carcinogen" under the criteria of the OSHA Laboratory Standard.
Toxicity
The acute toxicity of acrylamide is moderate by ingestion or skin contact. Skin exposure leads to redness and peeling of the skin of the palms. Aqueous acrylamide solutions cause eye irritation; exposure to a 50% solution of acrylamide caused slight corneal injury and slight conjunctival irritation, which healed in 8 days.
The chronic toxicity of acrylamide is high. Repeated exposure to ~2 mg/kg per day may result in neurotoxic effects, including unsteadiness, muscle weakness, and numbness in the feet (leading to paralysis of the legs), numbness in the hands,slurred speech, vertigo, and fatigue. Exposure to slightly higher repeated doses in animal studies has induced multisite cancers and reproductive effects, including abortion, reduced fertility, and mutagenicity. Acrylamide is listed in IARC Group 2B ("possible human carcinogen") and is classified as a "select carcinogen" under
the criteria of the OSHA Laboratory Standard.
Flammability and Explosibility
The volatility of acrylamide is low (0.03 mmHg at 40 °C), and it does not pose a significant flammability hazard.
Reactivity and Incompatibility
May polymerize violently on strong heating or exposure to strong base. Acrylamide may react violently with strong oxidizers.
Storage and Handling
Because of its carcinogenicity and neurotoxicity, acrylamide should be handled using the "basic prudent practices" of Chapter 5.C, supplemented by the additional precautions for work with compounds of high chronic toxicity (Chapter 5.D). In particular, this substance should be handled only when wearing appropriate impermeable gloves to prevent skin contact, and all operations that have the potential of producing acrylamide dusts or aerosols of solutions should be conducted in a fume hood to prevent exposure by inhalation.
Accidents
In the event of skin contact, immediately wash with soap and water and remove contaminated clothing. In case of eye contact, promptly wash with copious amounts of water for 15 min (lifting upper and lower lids occasionally) and obtain medical attention. If acrylamide is ingested, obtain medical attention immediately.If large amounts of acrylamide dust are inhaled, move the person to fresh air and seek medical attention at once.
In the event of a spill, mix acrylamide with an absorbent material (avoid raising dust), place in an appropriate container, and dispose of properly. Evacuation and cleanup using respiratory protection may be necessary in the event of a large spill or release in a confined area.
Disposal
Excess acrylamide and waste material containing this substance should be placed in an appropriate container, clearly labeled, and handled according to your institution's waste disposal guidelines.
- Related articles
- Related Qustion
- Acrylamide in Food Feb 23, 2022
Acrylamide is primarily used industrially to make polyacrylamide, which is mainly used in treating effluent from water treatment plants and industrial processes.
- Acrylamide and Cancer Risk Oct 31, 2019
Acrylamide is a substance that forms through a natural chemical reaction between sugars and asparagine, an amino acid, in plant-based foods – including potato and cereal-grain-based foods.
Acetylene (100% purity) is odourless, but commercial purity has a distinctive garlic-like odour and is very soluble in alcohol and almost miscible with ethane. Acetylene is a flammable gas and kept under pressure in gas cylinders. Under cer....
Sep 2,2019Organic ChemistryAcrylonitrile is an organic compound with the formula CH2CHCN. It is a colorless volatile liquid, although commercial samples can be yellow due to impurities. In terms of its molecular structure, it consists of a vinyl group linked to a nit....
Sep 4,2019Organic ChemistryAcrylamide
79-06-1You may like
- Synthesis Methods and Applications of Chalcone
Aug 2, 2024
- What is the anthrone test used for?
Jun 12, 2024
- Benzhydrol:Melting point,Uses,Hazards
Mar 22, 2024
- Acrylamide
-
- $10.70 / 1KG
- 2024-08-20
- CAS:79-06-1
- Min. Order: 10KG
- Purity: 99%
- Supply Ability: 10000kg
- Acrylamide
-
- $0.00 / 1kg
- 2024-08-15
- CAS:79-06-1
- Min. Order: 1kg
- Purity: 0.99
- Supply Ability: 100tons
- Acrylamide
-
- $10.00 / 25Kg/Bag
- 2024-08-15
- CAS:79-06-1
- Min. Order: 25KG
- Purity: 98%;25%~50%
- Supply Ability: 1000tons/month