- Stannous octoate
-
- $0.00 / 25KG
-
2023-08-15
- CAS:301-10-0
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: 50000KG/month
- Stannous octoate
-
- $10.00 / 1KG
-
2021-11-17
- CAS:301-10-0
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: 10 mt
|
| | Stannous octoate Basic information |
| | Stannous octoate Chemical Properties |
| Melting point | <-20°C | | Boiling point | >200°C | | density | 1.251 g/mL at 25 °C(lit.) | | vapor pressure | 0.3Pa at 20℃ | | refractive index | n20/D 1.493(lit.) | | Fp | >110°C | | pka | 5.09[at 20 ℃] | | form | liquid | | Specific Gravity | 1.251 | | Water Solubility | Miscible with water. | | Hydrolytic Sensitivity | 7: reacts slowly with moisture/water | | Exposure limits | ACGIH: TWA 0.1 mg/m3; STEL 0.2 mg/m3 (Skin)
NIOSH: IDLH 25 mg/m3; TWA 0.1 mg/m3 | | InChIKey | KSBAEPSJVUENNK-UHFFFAOYSA-L | | LogP | 2.64 at 25℃ | | CAS DataBase Reference | 301-10-0(CAS DataBase Reference) | | EPA Substance Registry System | Stannous 2-ethylhexanoate (301-10-0) |
| | Stannous octoate Usage And Synthesis |
| Chemical Properties | White or light yellowish brown paste. Soluble in petroleum ether, insoluble in water. low toxicity of Stannous octoate, oral acute poisoning data of rats LD50=3400mg/kg. acute percutaneous poisoning data of rabbits LD50>2000mg/kg. | | Uses | A catalyst for polylactide polymerization. | | Uses | Tin(II) 2-ethylhexanoate is used as a polymerization initiator in polylactic acid production. It acts as an intermediate as well as a catalyst for urethane foams, lubricants, addition agents and stabilizers for transformer oils. | | Uses | Stannous octoate is susceptible to hydrolysis and oxidation and cannot be used in combination polyethers (premixes). Its catalytic activity is higher than that of dibutyltin dilaurate.
Stannous octoate can be used as a catalyst for polyurethane, mainly in the production of soft block polyether type polyurethane foam, but also as a catalyst for polyurethane coatings, elastomers, room temperature curing silicone rubber, etc. As it is a divalent tin compound, it may be oxidized to tetravalent tin compound itself after foaming, and it remains in the foam body to play the role of an antioxidant, which stays in the foam after foaming and has no adverse effect on the foam performance. | | Preparation | Stannous octoate is produced by reacting 2-ethylhexanoic acid with sodium hydroxide to form sodium 2-ethylhexanoate, which then undergoes a complex decomposition reaction with stannous chloride by heating in an inert solvent. | | Hazard | Toxic material. | | Flammability and Explosibility | Non flammable | | Toxicology | Stannous octoate has influence to human health. It may cause an allergic skin reaction, and serious eye damage. In addition, it is suspected of damaging fertility or the unborn child, and harmful to aquatic life with long lasting effects. |
| | Stannous octoate Preparation Products And Raw materials |
|