| Identification | More | [Name]
ANILAZINE | [CAS]
101-05-3 | [Synonyms]
2,4-DICHLORO-6-(2-CHLOROANILINO)-1,3,5-TRIAZINE
2,4-DICHLORO-6-O-CHLOROANILINO-S-TRIAZINE
[4-BROMO-3-CHLOROPHENYL]-1-METHOXY-1-METHYLUREA
6-(2-CHLOROANILINO)-2,4-DICHLORO-1,3,5-TRIAZINE
ANILAZINE
B-622
DYRENE(R)
KEMATE(R)
LABOTEST-BB LT00134858
TRIAZINE
TRIAZINE(R)
ZINOCHLOR
(o-Chloroanilino)dichlorotriazine
1,3,5-Triazin-2-amine, 4,6-dichloro-N-(2-chlorophenyl)-
2-(2-Chloranilin)-4,6-dichlor-1,3,5-triazin
2,4-Dichloro-6-(2-chloroanilino)-s-triazine
2,4-Dichloro-6-(o-chloranilino)-s-triazine
2,4-dichloro-6-(o-chloroanilino)-s-triazin
2,4-dichloro-6-o-chloranilino-s-triazine
4,6-dichloro-n-(2-chlorophenyl)-1,3,5-triazin-2-amine | [EINECS(EC#)]
202-910-5 | [Molecular Formula]
C9H5Cl3N4 | [MDL Number]
MFCD00041815 | [Molecular Weight]
275.52 | [MOL File]
101-05-3.mol |
| Chemical Properties | Back Directory | [Appearance]
white to light brown crystals or powder | [Melting point ]
159-160℃ | [Boiling point ]
425.99°C (rough estimate) | [density ]
1.611 | [refractive index ]
1.6000 (estimate) | [storage temp. ]
0-6°C | [form ]
neat | [pka]
0.43±0.10(Predicted) | [Stability:]
Stable. Incompatible with oils and alkalies. May corrode some types of metal and alloy. | [Water Solubility ]
10mg/L(temperature not stated) | [Merck ]
13,659 | [BRN ]
223133 | [Exposure limits]
The German Research Society’s recommended Maximum Allowable
Concentration is 0.2 mg/m3. | [CAS DataBase Reference]
101-05-3(CAS DataBase Reference) | [EPA Substance Registry System]
Anilazine (101-05-3) |
| Safety Data | Back Directory | [Hazard Codes ]
Xi,N | [Risk Statements ]
R36/38:Irritating to eyes and skin .
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment . | [Safety Statements ]
S22:Do not breathe dust .
S60:This material and/or its container must be disposed of as hazardous waste .
S61:Avoid release to the environment. Refer to special instructions safety data sheet . | [RIDADR ]
UN3077 9/PG 3 | [WGK Germany ]
3 | [RTECS ]
XY7175000 | [Hazardous Substances Data]
101-05-3(Hazardous Substances Data) | [Toxicity]
LD50 orally in rats: >5000 mg/kg, Mobay Technical Information Sheet, Jan. 1979 |
| Hazard Information | Back Directory | [General Description]
White to tan crystals or white powder. Moderately soluble in organic solvents. Insoluble in water. Melting point 159°C. | [Reactivity Profile]
ANILAZINE(101-05-3) is incompatible with oils and alkalis. ANILAZINE(101-05-3) is slightly corrosive to metals. | [Air & Water Reactions]
Insoluble in water. Stable in neutral and slightly acidic aqueous media but hydrolyzes on heating with alkali. | [Fire Hazard]
Flash point data for this chemical are not available; however, ANILAZINE is probably combustible. | [Chemical Properties]
white to light brown crystals or powder | [Uses]
Fungicide. | [Uses]
Nonsystemic, foliar fungicide used in potatoes, tomatoes, wheat, barley and ornamentals. | [Uses]
Pesticide used to control fungus diseases in lawns and turf. | [Definition]
ChEBI: A member of the class of triazenes that is dichlorotriazene in which the hydrogen is replaced by an o-chloroanilino group. A fungicide formerly used to control leaf spots and downy mildew, it is no longer approved for use within the European U
ion. | [Environmental Fate]
Soil. Anilazine is readily degraded by soil bacteria (Harris et al., 1968). The reported
half-life of anilazine in soil is approximately 12 hours (Hartley and Kidd, 1987)
Plant. In plants, one or both of the chlorine atoms on the triazine ring may be replaced
by thio or amino groups (Hartley and Kidd, 1987)
Chemical/Physical. Anilazine is subject to hydrolysis (Windholz et al., 1983) releasing
chlorine gas (Hartley and Kidd, 1987) |
|
|