| Identification | More | [Name]
Copper quinolate | [CAS]
10380-28-6 | [Synonyms]
8-Hydroxyquinoline copper complex
8-HYDROXYQUINOLINE, COPPER(II) SALT
8-HYDROXYQUINOLINE COPPER SALT
8-HYDROXYQUINOLINE, CU(II) SALT
8-QUINOLINOL COPPER SALT
BIS(8-HYDROXYQUINOLINATO) COPPER(II)
Bis(8-quinolinolato)copper
BIS(8-QUINOLINOLATO) COPPER(II)
COPPER 8-HYDROXYQUINOLATE
COPPER 8-HYDROXYQUINOLINATE
COPPER 8-HYDROXYQUINOLINE
COPPER-8-QUINOLINOLATE
COPPER BIS(8-HYDROXYQUINOLINATE)
COPPER II 8-HYDROXYQUINOLINATE
COPPER (II) 8-HYDROXYQUINOLINE
COPPER OXINATE
copper quinolate
CUPRIC 8-HYDROXYQUINOLATE
CUPRIC 8-OXYQUINOLINE
CUPRIC 8-QUINOLINATE | [EINECS(EC#)]
233-841-9 | [Molecular Formula]
C20H12CuN2O4 | [MDL Number]
MFCD00067392 | [Molecular Weight]
407.87 | [MOL File]
10380-28-6.mol |
| Chemical Properties | Back Directory | [Appearance]
Yellow-green crystalline solid or powder. Odorless. | [Melting point ]
240 °C (dec.)(lit.)
| [density ]
1,68 g/cm3 | [storage temp. ]
0-6°C | [solubility ]
Acidic Chloroform (Slightly), Acidic DMSO (Slightly) | [Water Solubility ]
Insoluble in water | [form ]
Solid | [color ]
Very Dark Grey to Black | [Specific Gravity]
1.68 | [Odor]
yel.-grn. odorless powd. or orange clear liq., alcoholic odor | [Hydrolytic Sensitivity]
4: no reaction with water under neutral conditions | [InChIKey]
YXLXNENXOJSQEI-UHFFFAOYSA-L | [LogP]
2.460 | [Uses]
Fungicide and mildew-proofing of fabrics, analysis for copper. | [CAS DataBase Reference]
10380-28-6(CAS DataBase Reference) | [IARC]
3 (Vol. 15, Sup 7) 1987 | [NIST Chemistry Reference]
Copper 8-hydroxyquinolate(10380-28-6) | [EPA Substance Registry System]
10380-28-6(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
Xi | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36:Wear suitable protective clothing . | [RIDADR ]
3077 | [WGK Germany ]
3
| [RTECS ]
VC5250000 | [Hazard Note ]
Irritant | [TSCA ]
Yes | [HazardClass ]
9 | [PackingGroup ]
III | [HS Code ]
29334900 | [Toxicity]
mouse,LD50,intraperitoneal,67mg/kg (67mg/kg),LUNGS, THORAX, OR RESPIRATION: DYSPNEABEHAVIORAL: CONVULSIONS OR EFFECT ON SEIZURE THRESHOLDPERIPHERAL NERVE AND SENSATION: FLACCID PARALYSIS WITHOUT ANESTHESIA (USUALLY NEUROMUSCULAR BLOCKAGE),Toxicology and Applied Pharmacology. Vol. 5, Pg. 599, 1963. |
| Hazard Information | Back Directory | [Hazard]
Toxic by ingestion. Questionable carcinogen. | [Potential Exposure]
Fungicide and microbiocide. | [First aid]
If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions) if breathing has stopped, and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. | [Shipping]
UN3077 Environmentally Hazardous substances, solid, n.o.s., Hazard class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required. | [Incompatibilities]
May form highly unstable acetylides. Decomposes on burning producing toxic and corrosive fumes including copper and nitrogen oxides | [Chemical Properties]
Yellow solid | [Chemical Properties]
Yellow-green crystalline solid or powder. Odorless. | [Waste Disposal]
Copper-containing soluble wastes can be concentrated through the use of ion exchange, reverse osmosis, or evaporators to the point where copper can be electrolytically removed and sent to a reclaiming firm. If recovery is not feasible, the copper can be precipitated through the use of caustics and the sludge deposited in a chemical waste landfill Copper-containing wastes can be concentrated through the use of ion exchange, reverse osmosis, or evaporators to the point where copper can be electrolytically removed and sent to a reclaiming firm. Details of copper recovery from a variety of industrial wastes have been published. If recovery is not feasible, the copper can be precipitated by the use of caustics and the sludge deposited in a chemical waste landfill. Recommendable Methods: Precipitation, solidification, landfill, discharge to sewer, & incineration. Peer-review: Precipitate copper with alkali, filter, solidify precipitate. (Do not use ammonia as alkali). Cation exchange will allow recovery of copper. Eluate from cation exchanger can be passed through anion exchanger to remove (or reduce) naphthenic acid content. Exhausted ion exchange resins can be landfilled. (Peer-review conclusions of an IRPTC expert consultation) |
|
|