Identification | More | [Name]
Pyrene | [CAS]
129-00-0 | [Synonyms]
Pyren Pyene PYRENE PTRENE pyrene5 Pyrene> Pyrene,98% beta-Pyrene Pyrenepract PYRENE, REAG PYRENE,POWDER Pyrene,ca. 96% Pyrene Standard Pyrene (purity) Pyrene solution Pyrene, 98% 25GR Pyrene, >95%(GC) AKOS BBS-00004612 Pyrene, 98% 100GR Pyrene(Rri5262)~99% PYRENE, 5000MG, NEAT PYRENE, SUBLIMED, 99% Pyrene 1g [129-00-0] BENZO[DEF]PHENANTHRENE LABOTEST-BB LT01409709 PYRENE-D10, 25MG, NEAT 41164, Pyrene (purity) Pyrene crystalline, 95% Pyrene, synthesis grade Pyrene 500mg [129-00-0] Pyrene standard solution PYRENE, FOR FLUORESCENCE Pyrene@5.0 mg/mL in MeOH Pyrene@100 μg/mL in MeOH PYRENE FOR SYNTHESIS 5 G PYRENE FOR SYNTHESIS 50 G Pyrene@1000 μg/mL in MeOH PyreneSolution,10mg/L,1ml PyreneSolution,50mg/L,1ml PyreneSolution,100mg/L,1ml Pyrene, 98%, reagent grade PyreneSolution,500mg/L,1ml Pyrene@50 μg/mL in Toluene PYRENE FOR SYNTHESIS 250 G Pyrene sublimed grade, 99% coaltarpitchvolatiles:pyrene PyreneSolution,5,000mg/L,1ml PyreneSolution,1,000mg/L,1ml pyrene(benzo[def]phenanthrene) PYRENE, 1X1ML, MEOH, 1000UG/ML PYRENE, 1X1ML, CH2CL2, 200UG/ML Coal tar pitch volatiles:pyrene Pyrene (purified by subliMation) Pyrene(purifiedbysublimation)> Pyrene@0.5 mg/mL in Acetonitrile DERMATOPHYTE TEST MEDIUM PETRI 90MM Pyrene in Dichloromethane@0.2 mg/mL in Dichloromethane pyrene1.1.1-trichloro-2-methyl-2-propanolbenzo(d,e,f)phenanthrene | [EINECS(EC#)]
204-927-3 | [Molecular Formula]
C16H10 | [MDL Number]
MFCD00004136 | [Molecular Weight]
202.25 | [MOL File]
129-00-0.mol |
Chemical Properties | Back Directory | [Definition]
A condensed ring hydro-
carbon. | [Appearance]
Pyrene is a colorless crystalline solid when
pure or pale yellow plates (impure). Polycyclic aromatic
hydrocarbons (PAHs) are compounds containing multiple
benzene rings and are also called polynuclear aromatic
hydrocarbons. Solids and solutions have a Blue fluores-
cence (Merck Index). | [Melting point ]
148 °C | [Boiling point ]
393 °C
| [density ]
1.271 | [vapor pressure ]
180 at 25 °C (extrapolated from vapor pressures determined at higher temperatures, Tesconi andYalkowsky, 1998) | [refractive index ]
1.8520 (estimate) | [Fp ]
210 °C
| [storage temp. ]
APPROX 4°C
| [solubility ]
ethanol: soluble | [form ]
crystalline
| [pka]
>15 (Christensen et al., 1975) | [color ]
Pale yellow to yellow-greenish | [Specific Gravity]
1.271 | [Water Solubility ]
almost insoluble | [λmax]
330nm(EtOH)(lit.) | [Detection Methods]
HPLC | [Merck ]
14,7963 | [BRN ]
1307225 | [Henry's Law Constant]
0.490 at 25 °C (thermodynamic method-GC/UV spectrophotometry, Altschuh et al., 1999) | [InChIKey]
BBEAQIROQSPTKN-UHFFFAOYSA-N | [CAS DataBase Reference]
129-00-0(CAS DataBase Reference) | [IARC]
3 (Vol. Sup 7, 92) 2010 | [NIST Chemistry Reference]
Pyrene(129-00-0) | [EPA Substance Registry System]
129-00-0(EPA Substance) |
Safety Data | Back Directory | [Hazard Codes ]
N,T+,T,F,Xn | [Risk Statements ]
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment . R36/37/38:Irritating to eyes, respiratory system and skin . R26:Very Toxic by inhalation. R39/23/24/25:Toxic: danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed . R23/24/25:Toxic by inhalation, in contact with skin and if swallowed . R11:Highly Flammable. R63:Possible risk of harm to the unborn child. R43:May cause sensitization by skin contact. R45:May cause cancer. R67:Vapors may cause drowsiness and dizziness. R65:Harmful: May cause lung damage if swallowed. R38:Irritating to the skin. | [Safety Statements ]
S60:This material and/or its container must be disposed of as hazardous waste . S61:Avoid release to the environment. Refer to special instructions safety data sheet . S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) . S36/37:Wear suitable protective clothing and gloves . S22:Do not breathe dust . S16:Keep away from sources of ignition-No smoking . S7:Keep container tightly closed . S24/25:Avoid contact with skin and eyes . S23:Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer) . S53:Avoid exposure-obtain special instruction before use . S62:If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label . | [RIDADR ]
UN 3077 9/PG 3
| [WGK Germany ]
2
| [RTECS ]
UR2450000
| [TSCA ]
Yes | [HazardClass ]
6.1(b) | [PackingGroup ]
III | [HS Code ]
29349990 | [Safety Profile]
Poison by inhalation. Moderately toxic by ingestion and intraperitoneal routes. A sh irritant. Questionable carcinogen with experimental tumorigenic data. Human mutation data reported. When heated to decomposition it emits acrid smoke and irritating fumes. | [Hazardous Substances Data]
129-00-0(Hazardous Substances Data) | [Toxicity]
LD50 orally in Rabbit: 2700 mg/kg |
Hazard Information | Back Directory | [General Description]
Colorless solid, solid and solutions have a slight blue fluorescence. Used in biochemical research. | [Reactivity Profile]
PYRENE(129-00-0) reacts with nitrogen oxides to form nitro derivatives. PYRENE(129-00-0) also reacts with 70% nitric acid. | [Air & Water Reactions]
Insoluble in water. | [Hazard]
A questionable carcinogen, absorbed by
skin.
| [Health Hazard]
Pyrene is a carcinogenic agent and is absorbed by the skin. It is a skin irritant, a suspected mutagen, and an equivocal tumor-causing agent. Workers exposed to 3 to 5 mg/m3 of pyrene exhibited some teratogenic effects. Pyrene is a polycyclic aromatic hydrocarbon (PAH). The acute toxicity of pure PAHs appears low when administered orally or dermally to rats or mice. Human exposure to PAHs is almost exclusively via the gastrointestinal and respiratory tracts, and approximately 99 percent is ingested in the diet. Despite the high concentrations of pyrene to which humans may be exposed through food, there is currently little information available to implicate diet-derived PAHs as the cause of serious health effects. | [Potential Exposure]
Pyrene is used as an industrial chemi-
cal and in biochemical research. | [Fire Hazard]
When heated to decomposition, PYRENE emits acrid smoke and fumes. | [First aid]
Skin Contact: Flood all areas of body that
have contacted the substance with water. Don’t wait to
remove contaminated clothing; do it under the water
stream. Use soap to help assure removal. Isolate contami-
nated clothing when removed to prevent contact by others.
Eye Contact: Remove any contact lenses at once.
Immediately flush eyes well with copious quantities of
water or normal saline for at least 20?30 minutes. Seek
medical attention. Inhalation: Leave contaminated area
immediately; breathe fresh air. Proper respiratory protection
must be supplied to any rescuers. If coughing, difficult
breathing or any other symptoms develop, seek medical
attention at once, even if symptoms develop many hours
after exposure. Ingestion: Contact a physician, hospital or
poison center at once. If the victim is unconscious or con-
vulsing, do not induce vomiting or give anything by mouth.
Assure that this airway is open and lay him on his side
with his head lower than his body and transport immedi-
ately to a medical facility. If conscious and not convulsing,
give a glass of water to dilute the substance. Vomiting
should not be induced without a physician’s advice. | [Shipping]
UN3077 Environmentally hazardous substances,
solid, n.o.s., Hazard class: 9; Labels: 9-Miscellaneous haz-
ardous material, Technical Name Required. | [Incompatibilities]
Pyrene Dust may form explosive mixture
with air. Incompatible with oxidizers (chlorates, nitrates,
peroxides, permanganates, perchlorates, chlorine, bromine,
fluorine, etc.); contact may cause fires or explosions. Keep
away from alkaline materials, strong bases, strong acids,
oxoacids, epoxides. Pyrene reacts with nitrogen oxides to
form nitro derivatives. It also reacts with 70% nitric
acid | [Description]
Pyrene is an organic compound with chemical formula C16H10, light yellow monoclinic crystal (pure product is colorless), aromatic, combustible[1], insoluble in water and soluble in ethanol and ether. It can carry out electrophilic substitution, such as halogenation, nitration, sulfonation and other reactions. Pyrene mainly exists in the distillate of coal tar pitch. Pyrene is an organic synthetic raw material, which can be oxidized to produce 1,4,5,8-naphthalene tetracarboxylic acid, which is used in dyes, synthetic resins, disperse dyes and engineering plastics; After acylation, the vat dye brilliant orange GR and other dyes can be prepared. It can also make pesticides, plasticizers, etc. On October 27, 2017, the list of carcinogens published by the international agency for research on cancer of the World Health Organization was preliminarily sorted out for reference. Pyrene was included in the list of three types of carcinogens. | [Waste Disposal]
Dissolve or mix the
material with a combustible solvent and burn in a chemical
incinerator equipped with an afterburner and scrubber.
All federal, state, and local environmental regulations must
be observed . | [Physical properties]
Colorless solid (tetracene impurities impart a yellow color) or monoclinic prisms crystallized from
alcohol. Solutions have a slight blue fluorescence. | [Production Methods]
There is no commercial production or known use for this
compound. Pyrene has been used as starting material for the
synthesis of benzo[a]pyrene. | [Synthesis]
The content in high temperature tar is about 1.2% ~ 1.8%, which is prepared by separation and purification. Using anthracene oil as raw material, vacuum distillation, extraction, recrystallization and purification. The residue of distilled anthracene oil above 360 ℃ is used as raw material, the pyrene fraction is cut by distillation, benzene is used as solvent, washed with concentrated sulfuric acid, the base and unsaturated compounds are removed, and then the pure product is recrystallized with solvent oil. It can also be extracted from tobacco. Pyrene mainly exists in the distillate of coal tar pitch. The medium temperature asphalt is distilled under reduced pressure, and a small amount of direct superheated steam is introduced into the distillation kettle to cut the narrow fraction of pyrene, and then recrystallized with the mixed solution of solvent oil and ethanol or the mixed solution of benzene and solvent oil to obtain industrial pyrene with a purity of 95%. | [Carcinogenicity]
Pyrene was inactive as a tumor initiator. Based on
inadequate animal data and no human data, the IARC
classified pyrene as group 3, not classifiable as to its
carcinogenicity to humans, and IRIS classified pyrene
as a class D compound. Pyrene is present as a major
component of the total content of PAHs in the environment.
Exposure occurs primarily through tobacco smoke,
inhalation of polluted air, and by ingestion of food and
water. | [Source]
Detected in groundwater beneath a former coal gasification plant in Seattle, WA at a concentration of 180 μg/L (ASTR, 1995). Detected in 8 diesel fuels at concentrations ranging
from 0.16 to 24 mg/L with a mean value of 5.54 mg/L (Westerholm and Li, 1994). Identified in
Kuwait and South Louisiana crude oils at concentrations of 4.5 and 3.5 ppm, respectively
(Pancirov and Brown, 1975).
Based on laboratory analysis of 7 coal tar samples, pyrene concentrations ranged from 900 to
18,000 ppm (EPRI, 1990). Detected in 1-yr aged coal tar film and bulk coal tar at concentrations
of 2,700 and 2,900 mg/kg, respectively (Nelson et al., 1996). Lehmann et al. (1984) reported a
pyrene concentration of 125 mg/g in a commercial anthracene oil. Identified in high-temperature
coal tar pitches used in electrodes at concentrations ranging from 4,500 to 34,900 mg/kg
(Arrendale and Rogers, 1981). Lee et al. (1992a) equilibrated eight coal tars with distilled water at
25 °C. The maximum concentration pyrene observed in the aqueous phase is 0.1 mg/L.
Nine commercially available creosote samples contained pyrene at concentrations ranging from
31,000 to 100,000 mg/kg (Kohler et al., 2000). Also detected in asphalt fumes at an average
concentration of 140.21 ng/m3 (Wang et al., 2001).
Schauer et al. (1999) reported pyrene in diesel fuel at a concentration of 64 μg/g and in a dieselpowered
medium-duty truck exhaust at an emission rate of 71.9 μg/km.
California Phase II reformulated gasoline contained pyrene at a concentration of 3.38 g/kg. Gasphase
tailpipe emission rates from gasoline-powered automobiles with and without catalytic
converters were approximately 4.28 and 160 μg/km, respectively (Schauer et al., 2002).
Schauer et al. (2001) measured organic compound emission rates for volatile organic
compounds, gas-phase semi-volatile organic compounds, and particle-phase organic compounds
from the residential (fireplace) combustion of pine, oak, and eucalyptus. The respective gas-phase
and particle-phase emission rates of pyrene were 1.87 and 3.78 mg/kg of pine burned, 2.40 and
1.23 mg/kg of oak burned, and 2.70 and 0.585 mg/kg of eucalyptus burned.
Under atmospheric conditions, a low rank coal (0.5–1 mm particle size) from Spain was burned
in a fluidized bed reactor at seven different temperatures (50 °C increments) beginning at 650 °C.
The combustion experiment was also conducted at different amounts of excess oxygen (5 to 40%)
and different flow rates (700 to 1,100 L/h). At 20% excess oxygen and a flow rate of 860 L/h, the
amount of pyrene emitted ranged from 29.9 ng/kg at 700 °C to 402.9 ng/kg at 750 °C. The greatest
amount of PAHs emitted were observed at 750 °C (Mastral et al., 1999).
Drinking water standard: No MCLGs or MCLs have been proposed by the U.S. EPA (2000). | [Environmental Fate]
Biological. When pyrene was statically incubated in the dark at 25 °C with yeast extract and
settled domestic wastewater inoculum, complete degradation was demonstrated at the 5 mg/L
substrate concentration after 2 wk. At a substrate concentration of 10 mg/L, however, only 11 and
2% losses were observed after 7 and 14 d, respectively (Tabak et al., 1981).
Soil. The reported half-lives for pyrene in a Kidman sandy loam and McLaurin sandy loam are
260 and 199 d, respectively (Park et al., 1990).
Plant. Hückelhoven et al. (1997) studied the metabolism of pyrene by suspended plant cell
cultures of soybean, wheat, jimsonweed, and purple foxglove. Soluble metabolites were only
detected in foxglove and wheat. Approximately 90% of pyrene was transformed in wheat. In
foxglove, 1-hydroxypyrene methyl ether was identified as the main metabolite but in wheat, the
metabolites were identified as conjugates of 1-hydroxypyrene.
Photolytic. Adsorption onto garden soil for 10 d at 32 °C and irradiated with UV light produced
1,1′- bipyrene, 1,6-pyrenedione, 1,8-pyrenedione, and three unidentified compounds (Fatiadi,
1967). Microbial degradation by Mycobacterium sp. yielded the following ring-fission products:
4-phenanthroic acid, 4-hydroxyperinaphthenone, cinnamic acid, and phthalic acid. The
compounds pyrenol and the cis- and trans-4,5-dihydrodiols of pyrene were identified as
ring-oxidation products (Heitkamp et al., 1988).
Chemical/Physical. At room temperature, concentrated sulfuric acid will react with pyrene to
form a mixture of disulfonic acids. In addition, an atmosphere containing 10% sulfur dioxide
transformed pyrene into many sulfur compounds, including pyrene-1-sulfonic acid and
pyrenedisulfonic acid (Nielsen et al., 1983). | [Purification Methods]
Crystallise pyrene from EtOH, glacial acetic acid, *benzene or toluene. Purify it also by chromatography of CCl4 solutions on alumina, with *benzene or n-hexane as eluent. [Backer & Whitten J Phys Chem 91 865 1987.] It can also be zone refined and purified by sublimation. Marvel and Anderson [J Am Chem Soc 76 5434 1954] refluxed pyrene (35g) in toluene (400mL) with maleic anhydride (5g) for 4days, then added 150mL of aqueous 5% KOH and refluxed for 5hours with occasional shaking. The toluene layer was separated, washed thoroughly with H2O, concentrated to about 100mL and allowed to cool. Crystalline pyrene was filtered off and recrystallised three times from EtOH or acetonitrile. [Chu & Thomas J Am Chem Soc 108 6270 1986, Russell et al. Anal Chem 50 2961 1986.] The material is free from anthracene derivatives. Another purification step involves passage of pyrene in cyclohexane through a column of silica gel. It can be sublimed in a vacuum and zone refined. The picrate has m 224o. [Kano et al. J Phys Chem 89 3748 1985, Beilstein 5 IV 2467.] |
Questions And Answer | Back Directory | [Coal-tar chemical industrial products]
Pyrene is one of the processing products of coal tar with the content in the coal tar being about 0.6 to 1.2% and is mainly concentrated in the anthracene oil fraction. Pyrene is a kind of solid aromatic compound with its molecule comprising of four benzene rings connected with each other. Pyrene has its molecular formula of C16H10, molecular weight of 202.26, melting point of 150 °C, boiling point of 393 °C and the density of 1.277g/cm3. Pyrene appears as pale yellow crystalline monoclinic tablets, insoluble in water and easily soluble in benzene, toluene, carbon disulfide, ether and other organic solvents. Pyrene is carcinogenic and can be converted to mutagenic 1-nitro-pyrene under the effect of nitrogen dioxide. The position 1 and position 6 of pyrene can easily react with electrophilic reagent as well as have oxidation and hydrogenation reaction. Pyrene can also have halogenation, nitration and sulfonation; mono-substitution occurs at the 3-position, di-substitution includes 3, 10 and 3, 8-position with 3, 10 being more frequent. Its oxidation can generate 3, 10-quinones and 3, 8-quinones which can further oxidized to generate 1, 4, 5, 8-naphthalene tetracarboxylic acid.
Pyrene can be used in the production of dyes such as indanthrone dyes and anthraquinone vat dyes. The extraction method of is: take the residuum or bitumen distillate oil produced from the distillation of the anthracene fractions as the raw material, perform distillation under reduced pressure, take the 390~400 ℃ fraction which contains about 40% of pyrene fraction, then use 25% of the coal tar solvent oil and 75% ethanol mixed solvent (the volume of the solvent: pyrene fraction: 1:12), and recrystallized for several times until qualified products are obtained.
![](/NewsImg/2016-07-15/201671514344237979.jpg)
Pyrene belongs to low toxicity compounds and has mild irritation effect on the skin, eyes and upper respiratory tract. Long-term inhalation can cause aglobulism and mild liver and kidney damage. Long-term exposure upon 3mg/m3~5mg/m3 can cause headaches, fatigue, loss of appetite, and being prone to excitable.
The above information is edited by the chemicalbook of Dai Xiongfeng.
| [Probing agent for determination of the fluidity of membrane lipid]
Pyrene is a commonly used probe for determination of the fluidity of the membrane lipid with high quantum yield but shorter excited lifetime than DPH (1, 6-diphenyl a 1, 3, 5-triene), so it is not sensitive enough for determination of the slight change in the lipid fluidity and is suitable for system of greater mobility. The excitation wavelength of pyrene is 342nm and the emission wavelength is 383nm with the excitation and emission spectra overlapping significantly with each other. Pyrene mainly bound to the hydrocarbon chain of the membrane lipid. Once a monomer formed via the binding between a pyrene molecule to lipid molecule had been excited by light, it move and be close to another pyrene molecule which has not been excited yet via lateral diffusion motion, forming collision compounds namely excitation dimer. The efficiency for the formation of the excitation dimer depends on the concentration of pyrene binding to the membrane lipid as well as the viscosity of the medium surrounding the pyrene. When the concentration and temperature of pyrene becomes stable, the ratio of the fluorescence intensity between monomer and dimer will decrease with the increasing viscosity of the medium surrounding the pyrene, namely pyrene, based on the ratio of the fluorescence of dimer to monomer, can reflect the lateral diffusion rate of the lipid molecule. High medium viscosity will cause small lateral diffusion rate and small liquidity.
Reference: Editor: Huishan Liu, Binxue Liu & Zedai Fang; Reviwer: Shuyun Xu & Chuanggeng Ma; English-Chinese dictionary of pharmacology.
| [Chemical Properties]
It appears as light yellow monoclinic crystal. It is insoluble in water, easily soluble in ether, carbon disulfide, benzene and toluene.
| [Uses]
It can be used as raw material of organic synthesis. For example, it can be used for production of 1, 4, 5, 8-naphthalene tetracarboxylic acid via oxidation. It can be applied to dyes, synthetic resins and plastics; it can also be used for the manufacturing of vat dye Brilliant Orange GR and various kinds of other dyes. Moreover, it can also be used for the manufacturing of pesticides and plasticizers.
| [Production method]
Pyrene is mainly presented in the distillates of coal tar pitch. Send the asphalt for vacuum distillation under medium temperature; at the same time, directly send a small amount of the overheated steam to the distillation vessel; take the narrow fraction of pyrene and then use the mixed solution of solvent oil and ethanol or a mixed solution of benzene and solvent oil for recrystallization to obtain industrial pyrene with purity of 95%.
|
|
|