| Hazard Information | Back Directory | [Definition]
Any of a group of copper-tin alloys
usually containing 0.5–10% of tin.
They are generally harder, stronger in compression,
and more corrosion resistant
than brass. Zinc is often added, as in gunmetal
(2–4% zinc), to increase strength
and corrosion-resistance; bronze coins
often contain more zinc (2.5%) than tin
(0.5%). The presence of lead improves its
machining qualities.
Some copper-rich alloys containing no
tin are also called bronzes. Aluminum
bronzes, for example, with up to 10% aluminum,
are strong, resistant to corrosion
and wear, and can be worked cold or hot;
silicon bronzes, with 1–5% silicon, have
high corrosion-resistance; beryllium
bronzes, with about 2% beryllium, are
very hard and strong. | [Definition]
bronze: Any of a group of alloys ofcopper and tin, sometimes with leadand zinc present. The amount of tinvaries from 1% to 30%. The alloy ishard and easily cast and extensivelyused in bearings, valves, and othermachine parts. Various improvedbronzes are produced by addingother elements; for instance, phosphorbronzes contain up to 1% phosphorus.In addition certain alloys ofcopper and metals other than tin arecalled bronzes – aluminium bronze isa mixture of copper and aluminium.Other special bronzes include bellmetal, gun metal, and berylliumbronze. | [Industrial uses]
The term bronze is generally applied to anycopper alloy that has as the principal alloyingelement a metal other than zinc or nickel. Originallythe term was used to identify copper–tinalloys that had tin as the only, or principal,alloying element. Some brasses are calledbronzes because of their color, or because theycontain some tin. Most commercial copper–tinbronzes are now modified with zinc, lead, silver,or other elements.
Bronze is used in bearings, bushings, gears,valves, and other fittings both for water andsteam. Tin bronze, including statuary bronze,contains 2–20% tin; bell metal 15–25%; andspeculum metal up to 33%. Gun metal contains8–10% tin plus 2–4% zinc.
The properties of bronze depend on itscomposition and working. Phosphor bronze is tin bronze hardened and strengthened withtraces of phosphorus; it is used for fine tubing,wire springs, and machine parts. Lead bronzemay contain up to 30% lead; it is used for castparts such as low-pressure valves and fittings.Maganese bronze with 0.5 to 5% manganeseplus other metals, but often no tin, has highstrength. Aluminum bronze also contains no tin;its mechanical properties are superior to thoseof tin bronze, with up to 3% silicon, casts well,and can be worked hot or cold by rolling, forging,and similar methods. Beryllium bronze(also called beryllium copper) has about 2%beryllium and no tin. The alloy is hard andstrong and can be further hardened andstrengthened by precipitation hardening; it isone of the few copper alloys that responds toheat treatment, approaching three times thestrength of structural steel. |
|
| Company Name: |
Alfa Aesar
|
| Tel: |
400-6106006 |
| Website: |
http://chemicals.thermofisher.cn |
| Company Name: |
Sigma-Aldrich
|
| Tel: |
021-61415566 800-8193336 |
| Website: |
https://www.sigmaaldrich.cn |
| Company Name: |
Alfa Chemistry
|
| Tel: |
1-516-6625404 |
| Website: |
https://www.alfa-chemistry.com |
| Company Name: |
Energy Chemical
|
| Tel: |
021-58432009 400-005-6266 |
| Website: |
http://www.energy-chemical.com |
|