2-Mercapto-N-2-naphthylacetamid

THIONALIDE Struktur
93-42-5
CAS-Nr.
93-42-5
Bezeichnung:
2-Mercapto-N-2-naphthylacetamid
Englisch Name:
THIONALIDE
Synonyma:
THIONALIDE;Thiolglycolic-β-aminonaphthalide;2-mercapto-n-2-naphthylacetamide;Thionalide [for Cu Determination];2-Mercapto-N-(2-naphtyl)acetamide;ALPHA-MERCAPTO-N,2-NAPHTHYLACETAMIDE;N-naphthalen-2-yl-2-sulfanylacetamide;N-(2-Naphthalenyl)-2-mercaptoacetamide;Acetamide, 2-mercapto-N-2-naphthalenyl-;N-naphthalen-2-yl-2-sulfanyl-ethanamide
CBNumber:
CB4492757
Summenformel:
C12H11NOS
Molgewicht:
217.29
MOL-Datei:
93-42-5.mol

2-Mercapto-N-2-naphthylacetamid Eigenschaften

Schmelzpunkt:
111-112°
Dichte
1.1799 (rough estimate)
Brechungsindex
1.6000 (estimate)
Löslichkeit
Sparingly soluble in water, readily soluble in organic solvents. The solubility in water is considerably increased by addition of relatively small amounts of ethanol or acetic acid.
Aggregatzustand
White or pale yellow needles.
Sicherheit
  • Risiko- und Sicherheitserklärung
  • Gefahreninformationscode (GHS)
Bildanzeige (GHS) GHS hazard pictogramsGHS hazard pictogramsGHS hazard pictograms
Alarmwort Achtung
Gefahrenhinweise
Code Gefahrenhinweise Gefahrenklasse Abteilung Alarmwort Symbol P-Code
H315 Verursacht Hautreizungen. Hautreizung Kategorie 2 Warnung GHS hazard pictogramssrc="/GHS07.jpg" width="20" height="20" /> P264, P280, P302+P352, P321,P332+P313, P362
H318 Verursacht schwere Augenschäden. Schwere Augenschädigung Kategorie 1 Achtung GHS hazard pictogramssrc="/GHS05.jpg" width="20" height="20" /> P280, P305+P351+P338, P310
H335 Kann die Atemwege reizen. Spezifische Zielorgan-Toxizität (einmalige Exposition) Kategorie 3 (Atemwegsreizung) Warnung GHS hazard pictogramssrc="/GHS07.jpg" width="20" height="20" />
H411 Giftig für Wasserorganismen, mit langfristiger Wirkung. Langfristig (chronisch) gewässergefährdend Kategorie 2
Sicherheit
P264 Nach Gebrauch gründlich waschen.
P264 Nach Gebrauch gründlich waschen.
P280 Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.
P302+P352 BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.
P305+P351+P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
P310 Sofort GIFTINFORMATIONSZENTRUM/Arzt/ anrufen.
P321 Besondere Behandlung
P332+P313 Bei Hautreizung: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.
P362 Kontaminierte Kleidung ausziehen und vor erneutem Tragen waschen.

2-Mercapto-N-2-naphthylacetamid Chemische Eigenschaften,Einsatz,Produktion Methoden

Verwenden

Thionalide reacts with a variety of metal ions to give chelate complexes which are sparingly soluble in water. The difference in stability of complexes formed by the reagent with various metal ions in some cases assures a certain analytical selectivity.
1. Copper(II), silver(I), mercury(II), bismuth(III), arsenic(III), tin(IV), gold(I), platinum(IV) and palladium(II) give precipitates with the reagent in acidic media (mineral acids).
2. The copper(II), mercury(II), cadmium(II), thallium(I) and gold(I) complexes precipitate from alkaline solutions containing tartrate.
3. Thallium(I), antimony(III) and bismuth(III) complexes are precipitated by the reagent from solutions containing cyanide and tartrate.
4. The thallium(I) complex also precipitates from alkaline (sodium hydroxide) solution containing cyanide and tartrate.
The above classification shows that the reaction can be made specific for thallium by appropriate choice of the pH of the solution and application of suitable masking agents. Similarly, the selectivity of the precipitation reaction can be increased for other ions too, by application of other masking agents. For instance, tin(IV) can be masked selectively in the presence of arsenic(III) and antimony(III) with phosphoric acid, while these latter two ions can be precipitated with thionalide.
The analytical application of thionalide is stimulated by the fact that its metal complexes are of stoichiometric composition, and can be dried at 105-110°C and weighed directly.
The reagent may also be utilized in volumetric analytical procedures. The thionalide content, which is equivalent to the metal to be determined, can be titrated directly iodometrically, according to the equation: 2C10H7-NH-CO-CH2-SH+I2=C10H7-NH-CO-CH2-S-S-CH2-CO-NH-C10H7+2HI.

2-Mercapto-N-2-naphthylacetamid Upstream-Materialien And Downstream Produkte

Upstream-Materialien

Downstream Produkte


2-Mercapto-N-2-naphthylacetamid Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global( 28)Lieferanten
Firmenname Telefon E-Mail Land Produktkatalog Edge Rate
TargetMol Chemicals Inc.
+1-781-999-5354
support@targetmol.com United States 19973 58
TargetMol Chemicals Inc. 4008200310
marketing@tsbiochem.com China 24017 58

93-42-5(2-Mercapto-N-2-naphthylacetamid)Verwandte Suche:


  • ALPHA-MERCAPTO-N,2-NAPHTHYLACETAMIDE
  • THIONALIDE
  • 2-Mercapto-N-(2-naphtyl)acetamide
  • N-(2-Naphthalenyl)-2-mercaptoacetamide
  • Thiolglycolic-β-aminonaphthalide
  • N-naphthalen-2-yl-2-sulfanylacetamide
  • N-naphthalen-2-yl-2-sulfanyl-ethanamide
  • Thionalide [for Cu Determination]
  • 2-mercapto-n-2-naphthylacetamide
  • Acetamide, 2-mercapto-N-2-naphthalenyl-
  • 93-42-5
Copyright 2019 © ChemicalBook. All rights reserved