Methacrylsure Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT ODER FARBLOSE KRISTALLE MIT CHARAKTERISTISCHEM GERUCH.
PHYSIKALISCHE GEFAHREN
Die Dämpfe sind nicht stabilisiert. Sie können polymerisieren und Lüftungsöffnungen blockieren.
CHEMISCHE GEFAHREN
Polymerisiert leicht beim Erhitzen oder unter Einfluss von Licht, Oxidationsmitteln (z.B. Peroxiden) oder in Gegenwart von Salzsäurespuren. Feuer- und Explosionsgefahr. Greift Metalle an.
ARBEITSPLATZGRENZWERTE
TLV: 20 ppm (als TWA); (ACGIH 2005).
MAK: 5 ppm 18 mg/m?Spitzenbegrenzung: überschreitungsfaktor I(2); Schwangerschaft: Gruppe C; (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den Körper durch Inhalation.
INHALATIONSGEFAHREN
Beim Verdampfen bei 20°C tritt langsam eine gesundheitsschädliche Kontamination der Luft ein.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz verätzt die Augen, die Haut und die Atemwege. ätzend beim Verschlucken. Inhalation des Dampfes kann zu Lungenödem führen (s.Anm.).
LECKAGE
Ausgelaufene Flüssigkeit in abdichtbaren Kunststoffbehältern sammeln. Reste vorsichtig mit wässriger Soda oder Kalk neutralisieren. Dann mit viel Wasser wegspülen. NICHT mit Sägemehl oder anderen brennbaren Absorptionsmitteln binden. Persönliche Schutzausrüstung: Vollschutzanzug mit umgebungsluftunabhängigem Atemschutzgerät.
R-Sätze Betriebsanweisung:
R21/22:Gesundheitsschädlich bei Berührung mit der Haut und beim Verschlucken.
R35:Verursacht schwere Verätzungen.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
Beschreibung
Methacrylic acid, abbreviated MAA, is an organic compound. This colourless, viscous liquid is a carboxylic acid with an acrid unpleasant odor. It is soluble in warm water and miscible with most organic solvents. Methacrylic acid is produced industrially on a large scale as a precursor to its esters, especially methyl methacrylate (MMA) and poly(methyl methacrylate) (PMMA). The methacrylates have numerous uses, most notably in the manufacture of polymers with trade names such as Lucite and Plexiglas. MAA occurs naturally in small amounts in the oil of Roman chamomile.
Chemische Eigenschaften
Methacrylic acid is is a colorless, moderately volatile, corrosive liquid with a strongly acrid odor. It was first prepared in 1865 from ethyl methacrylate, in turn obtained by dehydration of ethyl α-hydroxyisobutyrate.
Verwenden
Methacrylic acid is used in the manufacture of methacrylate resins and plastics. It is used as Monomer for large-volume resins and polymers, organic synthesis. Many of the polymers are based on esters of the acid, as the methyl, butyl, or isobutyl esters. Methacrylic acid and methacrylate esters are used to prepare a wide range of polymers [→ Polyacrylamides and Poly(Acrylic Acids), → Polymethacrylates]. Poly(methyl methacrylate) is the primary polymer in this category, and it provides water-clear, tough plastics that are used in sheet form in glazing, signs, displays, and lighting panels.
synthetische
The most common route for the preparation of methacrylic acid is from
acetone as follows:
In a typical process, acetone is treated with hydrogen cyanide at 140??C in the
presence of ammonia as catalyst. The acetone cyanohydrin produced is
treated with concentrated sulphuric acid at 100??C to form methacrylamide
sulphate. This intermediate is not isolated but is directly converted to
methacrylic acid by treatment with water at about 90??C.
A competitive route now in commercial operation involves the two stage
oxidation of isobutene with air. The reaction proceeds via methacrolein:
Vorbereitung Methode
The most common approach to methacrylic acid synthesis is the hydrolysis of methacrylamide sulfate, obtained from acetone cyanohydrin. Methyl methacrylate may be prepared directly in a similar way by adding methanol in the final reaction step.
In the manufacture of methacrylic acid, methacrylamide sulfate is reacted with water under conditions similar to those used for formation of the ester. The reactor effluent separates into two phases. The upper organic layer is distilled to provide pure methacrylic acid. The lower layer is steam stripped to recover dilute aqueous methacrylic acid, which is recycled to the hydrolysis reactor. The waste acid stream is treated as in the manufacture of the ester.
Definition
ChEBI: Methacrylic acid is an alpha,beta-unsaturated monocarboxylic acid that is acrylic acid in which the hydrogen at position 2 is substituted by a methyl group. It is functionally related to an acrylic acid. It is a conjugate acid of a methacrylate.
Allgemeine Beschreibung
Methacrylic acid appears as a clear colorless liquid (or low-melting solid) with a pungent odor. Corrosive to metals and tissue. Flash point 170°F. Melting point 61°F. May polymerize exothermically if heated or contaminated. If the polymerization takes place inside a container, the container may rupture violently. Less dense than water. Vapors heavier than air. Used to make plastics.
Air & Water Reaktionen
Soluble in water.
Reaktivität anzeigen
Methacrylic acid reacts with strong oxidizing agents. Presents a storage hazard: violent exothermic polymerizations leading to explosion can occur spontaneously, particularly at low inhibitor or stabilizer concentrations [Anon., CISHC Chem. Safety Summ., 1979, 50, p. 34; Bond, J., Loss Prev. Bull., 1991, 101, p. 1].
Health Hazard
Methacrylic acid is a highly corrosive liquid.Contact with eyes can result in blindness.Skin contact may produce burns. No inhalation toxicity was observed in rats. Exposureto its vapors may produce skin and eye irritation, which can be mild to moderate. Adermal LD50 value in rabbits is 500 mg/kg.
Brandgefahr
Combustible liquid; flash point (open cup)
76°C (170°F); vapor pressure <0.1 torr at
20°C (68°F). Fire-extinguishing agent: water
spray, “alcohol” foam, dry chemical, or CO2;
use a water spray to dilute and flush the spill
and to disperse the vapors.
Methacrylic acid polymerizes readily. The
reaction is exothermic. The rate of reaction
accelerates on heating, which may result
in violent rupture of closed containers. The
polymerization may be inhibited with a trace
quantity of hydroquinone and hydroquinone
monomethyl ether (Aldrich 2006). The acid
may be stored safely below its melting point.
Sicherheitsprofil
Poison by
intraperitoneal route. Moderately toxic by
ingestion and skin contact. Corrosive to
skin, eyes, and mucous membranes.
Mutation data reported. Flammable when
exposed to heat, flame, or oxidizers. A
storage hazard; exothermic polymerization
may occur spontaneously. To fight fire, use
alcohol foam, spray, mist, dry chemical.
When heated to decomposition it emits
acrid smoke and irritating fumes.
mögliche Exposition
Methacrylic acid is used in preparation of methacrylates and carboxylated polymers; in the
production of the material or its alkyl esters, as monomers
or comonomers for synthetic resins for the production of
plastic sheets, moldings, and fibers.
Carcinogenicity
Methacrylic acid was considered
by the IARC Working Groups, but monographs were not
prepared because adequate data on its carcinogenicity were
not available. The IUCLID database reports a
dermal application study (dose unspecified) of mice treated
three times per week for 4 months and then observed for their
lifetimes. No excess dermal tumors were observed.
Versand/Shipping
UN2531 Methacrylic acid, stabilized, Hazard
class: 8; Labels: 8-Corrosive material.
läuterung methode
Aqueous methacrylic acid (90%) is saturated with NaCl (to remove the bulk of the water), then the organic phase is dried with CaCl2 and distilled under vacuum. Polymerisation inhibitors should be added to the distillate and include 0.25% p-methoxyphenol, 0.1% hydroquinone, or 0.05% N,N'-diphenyl-p-phenylenediamine. [Beilstein 2 IV 1518.]
Inkompatibilitäten
Vapor may form explosive mixture
with air. A reducing agent; incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or
explosions. Aqueous solution is strongly acidic: incompatible
with strong acids; caustics, ammonia, amines, isocyanates,
alkylene oxides; epichlorohydrin. Will polymerize readily from
heating above 59F/15C, or due to the presence of light, oxidizers (e.g., peroxides); or in the presence of traces of hydrochloric acid, with fire or explosion hazard. Attacks metals. Note:
Typically contains 100 ppm of monomethyl ether hydroquinone (150-76-5) as an inhibitor to prevent polymerization
Waste disposal
Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal,
state, and local environmental regulations must be
observed.
Methacrylsure Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
