Butyl methacrylate
- CAS No.
- 97-88-1
- Chemical Name:
- Butyl methacrylate
- Synonyms
- bma;N-BUTYL METHACRYLATE;n-BMA;2-Propenoic acid, 2-methyl-, butyl ester;2-Methyl-2-propenoic acid butyl ester;butilmetacrilato;Butil metacrilato;Butylmethacrylaat;BUTYL METHACRYLATE;1-BUTYLMETHACRYLATE
- CBNumber:
- CB3321278
- Molecular Formula:
- C8H14O2
- Molecular Weight:
- 142.2
- MDL Number:
- MFCD00009444
- MOL File:
- 97-88-1.mol
- MSDS File:
- SDS
Melting point | -75 °C |
---|---|
Boiling point | 162-165 °C (lit.) |
Density | 0.894 g/mL at 25 °C (lit.) |
vapor density | 4.91 (15 °C, vs air) |
vapor pressure | 2 mm Hg ( 20 °C) |
refractive index |
n |
Flash point | 123 °F |
storage temp. | Store below +30°C. |
solubility | 0.36g/l |
form | Liquid |
color | Clear |
Odor | Moderate acrylate. |
Viscosity | 1.06mm2/s |
explosive limit | 2.00-8.00%(V) |
Water Solubility | 3 g/L (20 ºC) |
BRN | 773960 |
Exposure limits |
ACGIH: TWA 5 mg/m3 NIOSH: TWA 5 mg/m3 |
Stability | Stable (though if no stabilizers are present, it may polymerize; typically stabilized through the addition of HQME). Incompatible with strong reducing agents, strong oxidizing agents. Flammable. Water-reactive at high or low pH. |
InChIKey | SOGAXMICEFXMKE-UHFFFAOYSA-N |
LogP | 3 at 25℃ |
Indirect Additives used in Food Contact Substances | BUTYL METHACRYLATE |
FDA 21 CFR | 175.105; 175.300; 177.1010; 178.3790 |
CAS DataBase Reference | 97-88-1(CAS DataBase Reference) |
EWG's Food Scores | 3-6 |
FDA UNII | R5QX287XXU |
NIST Chemistry Reference | Butyl methacrylate(97-88-1) |
EPA Substance Registry System | Butyl methacrylate (97-88-1) |
SAFETY
Risk and Safety Statements
Symbol(GHS) | ![]() ![]() GHS02,GHS07 |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
Signal word | Warning | |||||||||
Hazard statements | H226-H315-H317-H319-H335 | |||||||||
Precautionary statements | P210-P233-P240-P280-P303+P361+P353-P305+P351+P338 | |||||||||
Hazard Codes | Xi | |||||||||
Risk Statements | 10-36/37/38-43 | |||||||||
Safety Statements | 16-36/37/39-26 | |||||||||
RIDADR | UN 2227 3/PG 3 | |||||||||
WGK Germany | 1 | |||||||||
RTECS | OZ3675000 | |||||||||
Autoignition Temperature | 562 °F | |||||||||
TSCA | Yes | |||||||||
HazardClass | 3 | |||||||||
PackingGroup | III | |||||||||
HS Code | 29161490 | |||||||||
Toxicity | LD50 orally in Rabbit: > 2000 mg/kg LD50 dermal Rabbit > 2000 mg/kg | |||||||||
NFPA 704 |
|
Butyl methacrylate price More Price(20)
Manufacturer | Product number | Product description | CAS number | Packaging | Price | Updated | Buy |
---|---|---|---|---|---|---|---|
Sigma-Aldrich | 8.00585 | Butyl methacrylate (stabilised) for synthesis | 97-88-1 | 100mL | $49.1 | 2024-03-01 | Buy |
Sigma-Aldrich | 8.00585 | Butyl methacrylate (stabilised) for synthesis | 97-88-1 | 500mL | $65.3 | 2024-03-01 | Buy |
Sigma-Aldrich | 235865 | Butyl methacrylate 99%, contains 10 ppm monomethyl ether hydroquinone as inhibitor | 97-88-1 | 1l | $81.5 | 2024-03-01 | Buy |
Sigma-Aldrich | 235865 | Butyl methacrylate 99%, contains 10 ppm monomethyl ether hydroquinone as inhibitor | 97-88-1 | 18l | $513 | 2024-03-01 | Buy |
TCI Chemical | M0081 | Butyl Methacrylate (stabilized with HQ) >99.0%(GC) | 97-88-1 | 25mL | $17 | 2024-03-01 | Buy |
Butyl methacrylate Chemical Properties,Uses,Production
Description
Butyl methacrylate (BMA) is the organic compound with the formula C4H9O2CC(CH3)=CH2. A colorless liquid, it is a common monomer for the preparation of methacrylate polymers. It is typically polymerized under free-radical conditions.
Butyl methacrylate is a versatile, plasticizing methacrylate monomer that acts as an important building block in many copolymer compositions. Serving as a base for acrylic resins, BMA provides exceptional weather resistance, high gloss, color retention, and durability. BMA contributes more intermediate glass transition and hardness values, with a glass transition temperature (Tg) of 20 °C.
Chemical Properties
clear colourless liquid with an ester-like odour
Chemical Properties
Butyl methacrylate is a flammable, colorless liquid with a mild odor.
Uses
manufacture of methacrylic resins, solvent coatings, adhesives, oil additives; emulsions for textiles, leather and paper finishing; cross-linking methacrylic monomer for use in dental composite materials, artificial nails, etc.
Uses
n-Butyl methacrylate is used as a monomer for resins, solvent coatings, adhesives, oil additives, emulsions for textiles, leather, and paper finishing and in the manufacture of contact lenses . It is also used in dental resins, oil dispersible pesticides, and acrylic surface coatings and as copolymers, for example, in paraffin embedding media .
Uses
Monomer for resins, solvent coatings, adhe- sives, oil additives; emulsions for textiles, leather, and paper finishing.
Production Methods
n-Butyl methacrylate is produced by the reaction of methacrylic acid or methyl methacrylate with butanol .
Definition
ChEBI: Butylmethacrylate is an enoate ester.
General Description
A clear colorless liquid. Flash point 130°F. Less dense (7.5 lb / gal) than water and insoluble in water. Hence floats on water. Vapors heavier than air. Used to make resins adhesives, and oil additives.
Air & Water Reactions
Flammable. Sensitive to moisture. Insoluble in water.
Reactivity Profile
Butyl methacrylate reacts exothermically with acids. Reacts with oxidizing agents. Strong oxidizing acids may cause a reaction that is sufficiently exothermic to ignite the reaction products. Heat is generated with caustic solutions. Generates flammable hydrogen with alkali metals and hydrides. Polymerizes easily .
Hazard
Toxic by ingestion. Moderate fire risk.
Health Hazard
Inhalation may cause nausea because of offensive odor. Contact with liquid causes irritation of eyes and mild irritation of skin. Ingestion causes irritation of mouth and stomach.
Fire Hazard
Behavior in Fire: Containers may explode due to polymerization.
Chemical Reactivity
Reactivity with Water No reaction; Reactivity with Common Materials: No reactions; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: May occur upon exposure to heat; Inhibitor of Polymerization: 9-15 ppm monomethyl ether of hydroquinone; 90-120 ppm hydroquinone.
Safety Profile
Moderately toxic by intraperitoneal route. Mddly toxic by ingestion, inhalation, and skin contact. An experimental teratogen. Experimental reproductive effects. A skin irritant. Flammable liquid when exposed to heat or flame. Explosive in the form of vapor when exposed to heat or flame. Violent polymerization can be caused by heat, moisture, oxidizers. To fight fire, use foam, dry chemical, CO2. When heated to decomposition it emits acrid smoke and irritating fumes.
Potential Exposure
Forms an explosive mixture with air. Unless inhibitor is maintained at the proper level, oxidizers, heat, ultraviolet light, contamination, or moisture may cause polymerization. May accumulate static electrical charges and cause ignition of its vapors.
First aid
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seekmedical attention immediately. If this chemical contactsthe skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove fromexposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing hasstopped and CPR if heart action has stopped. Transferpromptly to a medical facility. When this chemical hasbeen swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. Medical observation is recommendedfor 2448 h after breathing overexposure, as pulmonaryedema may be delayed. As first aid for pulmonary edema,a doctor or authorized paramedic may consider administering a corticosteroid spray
storage
Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Protect against physical damage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Outsideor detached storage is preferred. Prior to working with butylmethacrylate you should be trained on its proper handlingand storage. Store in tightly closed containers in a cool,well-ventilated area away from incompatible materialslisted above and from light and heat. Butyl methacrylateshould be kept refrigerated and inhibited with 10-ppmhydroquinone monomethylether. Metal containers involvingthe transfer of this chemical should be grounded andbonded. Drums must be equipped with self-closing valves,pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when opening andclosing containers of this chemical. Sources of ignition,such as smoking and open flames, are prohibited where thischemical is used, handled, or stored in a manner that couldcreate a potential fire or explosion hazard.
Shipping
UN2227 Butyl methacrylate, stabilized, Hazard Class: 3; Labels: 3—Flammable liquid.
Purification Methods
Purify as for butyl acrylate. [Beilstein 2 IV 1525.]
Incompatibilities
Forms an explosive mixture with air. Unless inhibitor is maintained at the proper level, oxidizers, heat, ultraviolet light, contamination, or moisture may cause polymerization. May accumulate static electrical charges and cause ignition of its vapors
Waste Disposal
Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.
Butyl methacrylate Preparation Products And Raw materials
Raw materials
1of2
Preparation Products
Supplier | Tel | Country | ProdList | Advantage | |
---|---|---|---|---|---|
Shanghai Bojing Chemical Co.,Ltd. | +86-86-02137122233 +8613795318958 | bj1@bj-chem.com | China | 299 | 55 |
Shaanxi Didu New Materials Co. Ltd | +86-89586680 +86-13289823923 | 1026@dideu.com | China | 8722 | 58 |
Qingdao RENAS Polymer Material Co., Ltd. | +86-0532-86867058 +86-18562606086 | sales@qdrenas.com | China | 190 | 58 |
Hebei Mojin Biotechnology Co., Ltd | +8613288715578 | sales@hbmojin.com | China | 12450 | 58 |
Hebei Yanxi Chemical Co., Ltd. | +86-17531190177; +8617531190177 | peter@yan-xi.com | China | 5873 | 58 |
Hebei Guanlang Biotechnology Co,.LTD | +8619930503252 | daisy@crovellbio.com | China | 5828 | 58 |
Hebei Dangtong Import and export Co LTD | +8619831957301 | admin@hbdangtong.com | China | 983 | 58 |
Henan Bao Enluo International TradeCo.,LTD | +86-17331933971 +86-17331933971 | deasea125996@gmail.com | China | 2503 | 58 |
Capot Chemical Co.,Ltd. | 571-85586718 +8613336195806 | sales@capotchem.com | China | 29798 | 60 |
Henan Tianfu Chemical Co.,Ltd. | +86-0371-55170693 +86-19937530512 | info@tianfuchem.com | China | 21668 | 55 |
Related articles
- What is the difference between butyl methacrylate and poly(butyl methacrylate)?
- Butyl methacrylate (BMA), also known as N-Butyl methacrylate (n-BMA), is a versatile polymer monomer. The glass transition tem....
- May 13,2024
View Lastest Price from Butyl methacrylate manufacturers
Image | Update time | Product | Price | Min. Order | Purity | Supply Ability | Manufacturer | |
---|---|---|---|---|---|---|---|---|
![]() |
2024-08-23 | Butyl methacrylate
97-88-1
|
US $0.00 / Kg/Drum | 1KG | 99% | 3000mt/year | Jinan Finer Chemical Co., Ltd | |
![]() |
2024-08-21 | Butyl methacrylate
97-88-1
|
US $0.00 / kg | 20kg | 99.5% | 10 tons | Qingdao RENAS Polymer Material Co., Ltd. | |
![]() |
2024-08-20 | N-BUTYL METHACRYLATE
97-88-1
|
US $5.00-2.00 / KG | 1KG | 99% | 10000kg | Hebei Guanlang Biotechnology Co,.LTD |
-
- Butyl methacrylate
97-88-1
- US $0.00 / Kg/Drum
- 99%
- Jinan Finer Chemical Co., Ltd
-
- Butyl methacrylate
97-88-1
- US $0.00 / kg
- 99.5%
- Qingdao RENAS Polymer Material Co., Ltd.
-
- N-BUTYL METHACRYLATE
97-88-1
- US $5.00-2.00 / KG
- 99%
- Hebei Guanlang Biotechnology Co,.LTD