Acrylic acid
- CAS No.
- 79-10-7
- Chemical Name:
- Acrylic acid
- Synonyms
- Acrylate;2-PROPENOIC ACID;Glacial acrylic acid;PROPENOIC ACID;CH2=CHCOOH;Propensαure;Acroleic acid;prop-2-enoicacid;acrylated MonoMers;2-Propenoic acid (I)
- CBNumber:
- CB7307797
- Molecular Formula:
- C3H4O2
Lewis structure
- Molecular Weight:
- 72.06
- MDL Number:
- MFCD00004367
- MOL File:
- 79-10-7.mol
- MSDS File:
- SDS
| Melting point | 13 °C (lit.) |
|---|---|
| Boiling point | 139 °C (lit.) |
| Density | 1.051 g/mL at 25 °C (lit.) |
| vapor density | 2.5 (vs air) |
| vapor pressure | 4 mm Hg ( 20 °C) |
| refractive index |
n |
| Flash point | 130 °F |
| storage temp. | Store at +15°C to +25°C. |
| solubility | 1000g/l |
| form | Liquid |
| pka | 4.25(at 25℃) |
| color | Clear |
| Odor | Acrid odor |
| PH Range | 1 - 2 |
| PH | 3.68(1 mM solution);3.14(10 mM solution);2.63(100 mM solution); |
| Viscosity | 1.25cp (25C) |
| Evaporation Rate | 1 |
| explosive limit | 3.9-19.8%(V) |
| Water Solubility | MISCIBLE |
| Sensitive | Air Sensitive |
| λmax | 231nm(lit.) |
| Merck | 14,130 |
| BRN | 635743 |
| Exposure limits | TLV-TWA 10 ppm (30 mg/m3) (ACGIH). |
| Stability | Stability Unstable - may contain p-methoxyphenol as an inhibitor. Prone to hazardous polymerization. Combustible. Incompatible with strong oxidizing agents, strong bases, amines. Contact with oxidizers may cause fire. Light and air sensitive. Hygroscopic. |
| LogP | 0.46 at 25℃ |
| Indirect Additives used in Food Contact Substances | ACRYLIC ACID |
| FDA 21 CFR | 175.105; 175.300; 175.320; 177.1010; 178.3790 |
| CAS DataBase Reference | 79-10-7(CAS DataBase Reference) |
| EWG's Food Scores | 3 |
| FDA UNII | J94PBK7X8S |
| NIST Chemistry Reference | 2-Propenoic acid(79-10-7) |
| IARC | 3 (Vol. 19, Sup 7, 71) 1999 |
| EPA Substance Registry System | Acrylic acid (79-10-7) |
SAFETY
Risk and Safety Statements
| Symbol(GHS) |     GHS02,GHS05,GHS07,GHS09 |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Signal word | Danger | |||||||||
| Hazard statements | H226-H302+H312+H332-H314-H335-H410 | |||||||||
| Precautionary statements | P210-P273-P280-P303+P361+P353-P304+P340+P310-P305+P351+P338 | |||||||||
| Hazard Codes | C,N | |||||||||
| Risk Statements | 10-20/21/22-35-50 | |||||||||
| Safety Statements | 26-36/37/39-45-61 | |||||||||
| OEB | B | |||||||||
| OEL | TWA: 2 ppm (6 mg/m3) [skin] | |||||||||
| RIDADR | UN 2218 8/PG 2 | |||||||||
| WGK Germany | 1 | |||||||||
| RTECS | AS4375000 | |||||||||
| F | 8-13 | |||||||||
| Autoignition Temperature | 744 °F | |||||||||
| TSCA | Yes | |||||||||
| HazardClass | 8 | |||||||||
| PackingGroup | II | |||||||||
| HS Code | 29161110 | |||||||||
| Toxicity | LD50 orally in rats: 2.59 g/kg (Smyth) | |||||||||
| NFPA 704 |
|
Acrylic acid price More Price(31)
| Manufacturer | Product number | Product description | CAS number | Packaging | Price | Updated | Buy |
|---|---|---|---|---|---|---|---|
| Sigma-Aldrich | 8.00181 | Acrylic acid (stabilised with hydroquinone monomethyl ether) for synthesis | 79-10-7 | 100mL | $27.8 | 2024-03-01 | Buy |
| Sigma-Aldrich | 8.00181 | Acrylic acid (stabilised with hydroquinone monomethyl ether) for synthesis | 79-10-7 | 500mL | $56.6 | 2024-03-01 | Buy |
| Sigma-Aldrich | 8.00181 | Acrylic acid (stabilised with hydroquinone monomethyl ether) for synthesis | 79-10-7 | 1L | $77.9 | 2024-03-01 | Buy |
| Sigma-Aldrich | 147230 | Acrylic acid anhydrous, contains 200 ppm MEHQ as inhibitor, 99% | 79-10-7 | 5g | $46.4 | 2024-03-01 | Buy |
| Sigma-Aldrich | 8.00181 | Acrylic acid (stabilised with hydroquinone monomethyl ether) for synthesis | 79-10-7 | 25kg | $552 | 2024-03-01 | Buy |
Acrylic acid Chemical Properties,Uses,Production
Basic Information
Acrylic acid (AAc, IUPAC: prop-2-enoic acid) is the simplest unsaturated carboxylic acid, consisting of a vinyl group connected directly to a carboxylic acid terminus with the formula CH2=CHCO2H[1][2] which is a colorless liquid above its freezing point of 13°C ( 56°F) with a distinctive acrid odor[3][4][5]. It is corrosive to metals and tissue and prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur because the polymerizaiton of acrylic acid is exothermic. The inhibitor (usually hydroquinone) can greatly reduce the tendency to polymerize. It is miscible with water, alcohol, ether, benzene, chloroform, and acetone, but incompatible with strong oxidisers, strong bases, strong alkalies and pure nitrogen. It may polymerize (sometimes explosively) when contacting with amines, ammonia, oleum and chlorosulfonic acid, iron salts and peroxides[2][4].
Preparation methods
Acrylic acid can be prepared in different ways, for example as follows:
The easiest way to prepare pure acrylic acid in the laboratory is to exchange the ester of formic acid and readily available methyl acrylate. Sulfuric acid is a good catalyst.
CH2=CHCOOCH3 +HCOOH→CH2=CHCOOH+HCOOCH3
Acrolein can be oxidized in the liquid phase at 20-40℃ with silver or vanadium as the catalyst and methoxybenzene as the solvent which glacial acetic acid is more commonly used. It has been reported that the yield of acrylic acid can reach 65-90% based on the consumption of acrolein.
CH2=CHCHO+ 1/2 O2→CH2=CHCOOH
A mixture of water and 2,3 dibromopropionic acid is treated with zinc powder can obtain an aqueous solution of acrylic acid with a yield of 90%.
CH2BrCHBrCOOH +Zn →CH2=CHCOOH+ZnBr2
Acrylic acid also can be obtained by pyrolyzing sec-butyl acrylate at 500℃, or pyrolyzing ethyl acrylate at 570℃.
CH2=CHCOOCH(CH3)CH2CH3 → CH2=CHCOOH+CH3CH=CHCH3
At 200-300℃, acrylic acid can be obtained by passing carbon dioxide and ethylene through the silica gel impregnated with iron sulfite.
CH2=CH2+CO2→CH2=CHCOOH
Application
Acrylic acid is a carboxylic acid, of which the primary use is in the production of acrylic esters[2]. It has been traditionally used as the raw material for acrylic esters – methyl acrylate, ethyl acrylate, butyl acrylate and 2-ethylhexyl acrylate which were originally used to produce solvent-based acrylic resins but environmental concerns about solvent use led to the development of water-based acrylics[7]. Acrylic acid can readily react with a wide variety of organic and inorganic compounds which results in it’s considered as a very useful feedstock to manufacture many low molecular compounds, such as propionic acid, unsaturated fatty acids, heterocyclic compounds, and Diels-Alder addition products. As a vinyl compound and a carboxylic acid, acrylic acid is used widely for polymerisation, including production of polyacrylates. It is also a monomer for polyacrylic and polymethacrylic acids and other acrylic polymers[4].
Acrylic acid and esters are flammable, reactive, volatile liquids based on an alpha-, beta-unsaturated carboxyl structure. Incorporation of varying percentages of acrylate monomers permits the production of many formulations for latex and solution copolymers, copolymer plastics and cross-linkable polymer systems. Their performance characteristics—which impart varying degrees of tackiness, durability, hardness, and glass transition temperatures—promote consumption in many end-use applications. Major markets for the esters include surface coatings, textiles, adhesives, and plastics[8][9].
Polyacrylic acid which produced by acrylic acid can be further modified to produce superabsorbent polymers (SAPs) and other polyacrylic acid homopolymers or copolymers used as detergents, dispersants/antiscalants, anionic polyelectrolytes for water treatment, and rheology modifiers[7][8].
SAPs are cross-linked polyacrylates with the ability to absorb and retain more than 100 times their own weight in liquid. They have experienced very strong growth, primarily in baby diapers (nappies) and incontinence products[7][8].
A new application for SAPs is soaker pads used in food packaging. In 2007, the US Food and Drug Adminstration authorised SAPs in packaging with indirect food contact for poultry, meat, fish, fruit and vegetables[7].
Crude acrylic acid (CAA) is made by the oxidation of propylene. About 55% of the CAA is converted to acrylate esters. The remaining 45% is purified to 98–99.5% purity to glacial acrylic acid (GAA), which, in turn, is converted to polyacrylic acid, which is used to produce superabsorbent polymers (SAPs) and other polyacrylic acid copolymers. In 2016, global glacial acrylic acid consumption was estimated to account for about 45% of total crude acrylic acid consumption, of which 79% was consumed for superabsorbent polymers. Growth in GAA consumption is forecast at about 5% per year during 2016?21. Growth in demand for crude acrylic acid is forecast at 4.5% per year during 2016?21, driven by growth in superabsorbent polymers at 5.5% and acrylate esters at about 4%. SAP growth will be strongest in China and other areas of Asia, but will be much more moderate in the mature regions of North America, Western Europe, and Japan[8].
Health & Safety Hazard
Tests involving acute exposure of rats, mice, and rabbits have demonstrated that acrylic acid has moderate acute toxicity by inhalation or ingestion, and high acute toxicity by dermal exposure. Acrylic acid is a strong irritant to the skin, eyes, and mucous membranes in humans. The liquid may cause blindness if splashed into the eye. Acute (short-term) exposure of rats to acrylic acid by inhalation has been observed to produce nose and eye irritation, lung haemorrhage, and degenerative changes in the liver and kidneys.
Some ill-health effects could happen when people exposed to acrylic acid, while people can be easily exposed to acrylic acid through direct contact with a product containing it or by inhaling it in air contaminated by a nearby plant manufacturing acrylic acid, for example, in the workplace, exposure to acrylic acid occurs primarily via inhalation and dermal contact during its manufacture or use; consumers may be exposed to acrylic acid in polishes, paints, coatings, rug backings, adhesives, plastics, textiles, and paper finishes. In addition, acrylic acid may be released in wastewater and can be also produced naturally by some species of algae. When we do not feel well, we should get medical attention immediately.
Acrylic acid is sensitive to heat and sunlight and also a fire hazard when exposed to heat or flame. The product should be stored in a segregated and approved area away from heat, sources of ignition and the container should be kept in a cool, well-ventilated area, tightly closed and sealed until ready for use. It is also very necessary to keep the product away from incompatibles such as oxidising agents, acids, alkalis, moisture.
Reference
[1]https://www.sigmaaldrich.com/catalog/product/aldrich/147230?lang=zh®ion=CN
[2]https://www.chemwatch.net/211745/acrylic-acid
[3]https://www.arkema.com/en/products/product-finder/product-viewer/Acrylic-acid/
[4]https://www.chemicalbook.com/ChemicalProductProperty_EN_CB7307797.htm
[5]http://www.chemspider.com/Chemical-Structure.6333.html
[6]Manhua Mandy Lin. Selective oxidation of propane to acrylic acid with molecular oxygen[J]. Applied Catalysis A:General 207(2001)1-16.
[7]https://www.icis.com/resources/news/2007/11/01/9074870/acrylic-acid-uses-and-market-data/
[8]https://ihsmarkit.com/products/acrylic-acid-acrylate-esters-chemical-economics-handbook.html;
[9]https://www.arkema.com/en/products/product-finder/product-viewer/Acrylic-acid/
[10]https://www.epa.gov/sites/production/files/2016-09/documents/acrylic-acid.pdf
Description
Acrylic acid (IUPAC: prop-2-enoic acid) is an organic compound with the formula CH2=CHCO2H. It is the simplest unsaturated carboxylic acid, consisting of a vinyl group connected directly to a carboxylic acid terminus. This colorless liquid has a characteristic acrid or tart smell. It is miscible with water, alcohols, ethers, and chloroform. More than one billion kilograms are produced annually.
Chemical Properties
Acrylic acid is a colorless, flammable, and corrosive liquid or solid (below 13 C) with an irritating, rancid, odor. Sinks and mixes with water; irritating vapor is produced.
Uses
Acrylic acid is produced by oxidation of acrolein or hydrolysis of acrylonitrile. It is used in the manufacture of plastics; in paints, polishes, and adhesives; and as coatings for leather.
Uses
Acrylic acid undergoes the typical reactions of a carboxylic acid and, when reacted with an alcohol, it will form the corresponding ester. The esters and salts of acrylic acid are collectively known as acrylates (or propenoates). The most common alkyl esters of acrylic acid are methyl-, butyl-, ethyl-, and 2-ethylhexyl-acrylate.
Acrylic acid and its esters readily combine with themselves (to form polyacrylic acid) or other monomers (e.g. acrylamides, acrylonitrile, vinyl, styrene, and butadiene) by reacting at their double bond, forming homopolymers or copolymers which are used in the manufacture of various plastics, coatings, adhesives, elastomers, as well as floor polishes, and paints.
Uses
Usually used in preparing monodispersed poly (N-isopropylacryamide) (PNIPAM)/AAc microgels.And also used primarily as an intermediate in the production of acrylates.
Uses
In the manufacture of plastics.
Uses
An antibacterial agent.
Preparation
There are three routes to acrylic acid which have commercial significance;
they are based on propylene, acetylene and ethylene respectively. At the
present time, most acrylic acid is produced via the propylene route.
(i) Propylene route. This route involves the two-stage oxidation of propylene:
A mixture of propylene, air and steam is fed into a reactor containing a catalyst at about 320??C to give acrolein. This intermediate is not isolated but is passed directly to a second reactor, also containing a catalyst, at about 280??C. The effluent is cooled by contact with cold aqueous acrylic acid.
Acrylic acid is extracted from the solution with a solvent and then separated by distillation. Because of the ready availability of low cost propylene, this route has become the preferred route for the production of acrylic acid. (ii) Acetylene route. This route involves the reaction of acetylene, carbon monoxide and water:
In one process, the reaction is conducted in solution in tetrahydrofuran at about 200??C and 6-20 MPa (60--200 atmospheres). Nickel bromide is used as catalyst. The solution of acrylic acid in tetrahydrofuran, after separation of the unconverted acetylene and carbon monoxide in a degassing column, passes to a distillation tower where tetrahydrofuran is taken overhead and acrylic acid is the bottom product. The reaction between acetylene, carbon monoxide and water may also be carried out by using nickel carbonyl as the source of carbon monoxide. In this case, milder reaction conditions are possible. Owing to the high cost of acetylene, this route is now of little commercial importance.
(iii) Ethylene route. This route consists of the following sequence:
The addition of hydrogen cyanide to ethylene oxide takes place at 55-60??C in the presence of a basic catalyst such as diethylamine. The reaction is exothermic and is carried out in solution to facilitate control; the solvent is conveniently ethylene cyanohydrin. The reaction mixture is neutralized and ethylene cyanohydrin is separated by distillation. The second stage of the synthesis involves the dehydration and hydrolysis of ethylene cyanohydrin; these reactions are carried out in one step by heating the cyanohydrin with aqueous sulphuric acid at about 175??C. (It is possible, of course, that the intermediate in this conversion may be acrylonitrile, as shown, or P-hydroxypropionic acid or both.) At one time this was the standard route for the preparation of acrylic acid but it has been largely displaced by the more economical propylene route.
Production Methods
Acrylic acid is produced from propene which is a by product of ethylene and gasoline production. CH2=CHCH3 + 1.5 O2→ CH2=CHCO2H + H2O Because acrylic acid and its esters have long been valued commercially, many other methods have been developed but most have been abandoned for economic or environmental reasons. An early method was the hydrocarboxylation of acetylene ("Reppe chemistry") : HCCH + CO + H2O → CH2=CHCO2H This method requires nickel carbonyl and high pressures of carbon monoxide. It was once manufactured by the hydrolysis of acrylonitrile which is derived from propene by ammoxidation, but was abandoned because the method cogenerates ammonium derivatives. Other now abandoned precursors to acrylic acid include ethenone and ethylene cyanohydrin.
Definition
An unsaturated liquid carboxylic acid with a pungent odor. The acid and its esters are used to make ACRYLIC RESINS.
General Description
Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.
Air & Water Reactions
Flammable. Soluble in water. The presence of water, due to different solubilities of the acid and inhibitor (partitioning one from the other), may initiate polymerization.
Reactivity Profile
ACRYLIC ACID may polymerize violently especially when the frozen acid is partially thawed (freezing point 12°C or 53°F). Frozen acid should be melted at room temperature and the process should be well stirred. Do not use heat during the melting process [Kirk-Othmer, 3rd ed., Vol. 1, 1978, p. 330]. Corrodes iron and steel and polymerization may occur on contact with iron salts. The uninhibited acid polymerizes exothermically at ambient temperature and explodes if confined. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize. Explosive polymerization can also occur with strong bases, amines, ammonia, oleum, chlorosulfonic acid, and peroxides. Mixing with 2-aminoethanol, 28% ammonium hydroxide, ethylenediamine or ethyleneimine in a closed container causes an increase in temperature and pressure. Can react violently with oxidizing reagents and strong bases [Bretherick, 5th ed., 1995, p. 419].
Health Hazard
May burn skin or eyes upon short contact. INHALATION: eye and nasal irritation and lacrimation. INGESTION: may cause severe damage to the gastrointestinal tract.
Health Hazard
Acrylic acid is a corrosive liquid that cancause skin burns. Spill into the eyes candamage vision. The vapors are an irritantto the eyes. The inhalation hazard is oflow order. An exposure to 4000 ppm for4 hours was lethal to rats. The oral LD50values reported in the literature show widevariation. The dermal LD50 value in rabbitsis 280 mg/kg.
Fire Hazard
Combustible liquid; flash point (closed cup)
54°C (130°F), (open cup) 68°C (155°F);
vapor pressure 31 torr at 25°C (77°F); vapor
density 2.5 (air=1); autoignition temperature 360°C (680°F). Vapors of acrylic acid
form explosive mixtures with air within the
range 2.9–8.0% by volume in air. Fireextinguishing agent: water spray, “alcohol”
foam, dry chemical, or CO2; use a water
spray to flush and dilute the spill and to disperse the vapors.
Acrylic acid may readily polymerize at
ambient temperature. Polymerization may
be inhibited with 200 ppm of hydroquinone
monomethyl ether (Aldrich 2006). In the
presence of a catalyst or at an elevated temperature, the polymerization rate may accelerate, causing an explosion. The reactions of
acrylic acid with amines, imines, and oleum
are exothermic but not violent. Acrylic acid
should be stored below its melting point with
a trace quantity of polymerization inhibitor.
Its reactions with strong oxidizing substances
can be violent.
Flammability and Explosibility
Flammable
Contact allergens
Acrylates are esters from acrylic acid. Occupational contact allergies from acrylates have frequently been reported and mainly concern workers exposed to the glues based on acrylic acid, as well as dental workers and beauticians.
Safety Profile
Poison by ingestion, skin contact, and intraperitoneal routes. An experimental teratogen. Other experimental reproductive effects. A severe skin and eye irritant. Questionable carcinogen with experimental carcinogenic and tumorigenic data. Corrosive. Flammable liquid. May undergo exothermic polymerization at room temperature. May become explosive if confined. A fire hazard when exposed to heat or flame.
Safety
Acrylic acid is severely irritating and corrosive to the skin and the respiratory tract. Eye contact can result in severe and irreversible injury. Low exposure will cause minimal or no health effects, while high exposure could result in pulmonary edema. The LD50 is 340 mg/kg (rat, oral).
Potential Exposure
Acrylic acid is chiefly used in manufacture of plastics, acrylates, polyacrylic acids, polymer, and resins; as a monomer in the manufacture of acrylic resins and plastic products, leather treatment, and paper coatings. Also, it is used as a tackifier and flocculant.
Environmental Fate
Acrylic acid is corrosive, and its toxicity occurs at the site of contact.
Shipping
UN2218 Acrylic acid, stabilized, Hazard class: 8; Labels: 8-Corrosive material, 3-Flammable liquid
Purification Methods
It can be purified by steam distillation, or vacuum distillation through a column packed with copper gauze to inhibit polymerisation. (This treatment also removes inhibitors such as methylene blue that may be present.) Azeotropic distillation of the water with *benzene converts aqueous acrylic acid to the anhydrous material. [Beilstein 2 H 397, 2 I 186, 2 II 383, 2 III 1215, 2 IV 1455.]
Substituents
As a substituent acrylic acid can be found as an acyl group or a carboxyalkyl group depending on the removal of the group from the molecule. More specifically these are :
The acryloyl group, with the removal of the -OH from carbon-1.
The 2-carboxy ethenyl group, with the removal of a -H from carbon-3. This substituent group is found in chlorophyll..
Toxicity evaluation
Acrylic acid’s large-scale use and production results in its release into the environment. The most likely route of exposure is inhalation because acrylic acid has a low vapor pressure. The miscibility of acrylic acid in water combined with its low vapor pressure prevent it from accumulating in the soil. Acrylic acid that is emitted into the atmosphere is degraded photochemically by reaction with hydroxyl radicals. There is no potential for long-range atmospheric transport of acrylic acid because it has an atmospheric lifetime of 1 month.
Incompatibilities
May form explosive mixture with air. Light, heat, and peroxides can cause polymerization. Use MEHQ (monomethyl ether of hydroquinone) as an inhibitor. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Incompatible with sulfuric acid, caustics, ammonia, amines, isocyanates, alkylene oxides; epichlorohydrin, toluene diamine, oleum, pyridine, methyl pyridine, n-methyl pyrrolidone, 2-methyl-6-ethyl aniline, aniline, ethylene diamine, ethyleneimine, and 2aminoethanol. Severely corrodes carbon steel and iron; attacks other metals. May accumulate static electrical charges and may cause ignition of its vapors.
Waste Disposal
Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Incineration. 100 500 ppm potassium permanganate will degrade acrylic acid to a hydroxy acid which can be disposed of at a sewage treatment.
Acrylic acid Preparation Products And Raw materials
Raw materials
1of3
Preparation Products
1of8
| Supplier | Tel | Country | ProdList | Advantage | |
|---|---|---|---|---|---|
| Hebei Weibang Biotechnology Co., Ltd | +8615350571055 | Sibel@weibangbio.com | China | 6086 | 58 |
| Auschemicals Pty Ltd | +61406202619 | info@auschemicals.com | Australia | 426 | 58 |
| Runte International Trade Limited | 19565631292 19565631292 | lucky@sdruntechem.com | China | 270 | 58 |
| Hebei Weibang Biotechnology Co., Ltd | +8615531157085 | abby@weibangbio.com | China | 8810 | 58 |
| Hebei Mojin Biotechnology Co., Ltd | +86 13288715578 +8613288715578 | sales@hbmojin.com | China | 12838 | 58 |
| Hebei Chuanghai Biotechnology Co,.LTD | +86-13131129325 | sales1@chuanghaibio.com | China | 5890 | 58 |
| Yujiang Chemical (Shandong) Co.,Ltd. | +86-17736087130 +86-18633844644 | catherine@yjchem.com.cn | China | 987 | 58 |
| Qingdao RENAS Polymer Material Co., Ltd. | +86-0532-86867058 +86-18562606086 | sales@qdrenas.com | China | 476 | 58 |
| Capot Chemical Co.,Ltd. | +86-（0）57185586718 +86-13336195806 | sales@capot.com | China | 29791 | 60 |
| Shanghai Daken Advanced Materials Co.,Ltd | +86-371-66670886 | info@dakenam.com | China | 18752 | 58 |
Related articles
- Production methods of acrylic acid
- Acrylic acid is an important organic synthesis raw material and a synthetic resin monomer, and is a vinyl monomer with a very ....
- Mar 8，2022
- Uses of Acrylic acid
- Acrylic acid, also known as prop-2-enoic acid, is an organic molecule with the formula C3H4O2, and is the simplest of the unsa....
- Oct 22，2021
View Lastest Price from Acrylic acid manufacturers
| Image | Update time | Product | Price | Min. Order | Purity | Supply Ability | Manufacturer | |
|---|---|---|---|---|---|---|---|---|
 |
2024-10-29 | Acrylic Acid
79-10-7
|
US $0.00 / kg | 20kg | 99.5% | 20 tons | Qingdao RENAS Polymer Material Co., Ltd. | |
 |
2024-10-29 | Acrylic Acid,Glacial
79-10-7
|
US $0.00 / kg | 20kg | 99.5% | 20 tons | Qingdao RENAS Polymer Material Co., Ltd. | |
 |
2024-10-25 | Acrylic acid;Propenoic acid;AA
79-10-7
|
US $1.50 / KG | 16T | 99.5% | 3000tons/month | Hebei Yanxi Chemical Co., Ltd. |
-
- Acrylic Acid
79-10-7
- US $0.00 / kg
- 99.5%
- Qingdao RENAS Polymer Material Co., Ltd.
-
- Acrylic Acid,Glacial
79-10-7
- US $0.00 / kg
- 99.5%
- Qingdao RENAS Polymer Material Co., Ltd.
-
- Acrylic acid;Propenoic acid;AA
79-10-7
- US $1.50 / KG
- 99.5%
- Hebei Yanxi Chemical Co., Ltd.