酪酸無水物 化学特性,用途語,生産方法
外観
無色～わずかにうすい黄色, 澄明の液体
溶解性
水, エタノールに分解して溶解, エーテルに可溶。エタノール、アセトン及びクロロホルムに溶けやすく、水に極めて溶けにくい。
用途
酪酸エステル、医薬品、可塑剤、香料、皮なめし剤等
用途
有機合成原料。
説明
Butyric anhydride, or Butanoic anhydride, is a chemical compound with the formula (CH
3CH
2CH
2CO)
2O.It is a colorless liquid that smells strongly of butyric acid, formed by its reaction with the moisture in the air.
化学的特性
clear liquid
使用
Butyric anhydride is used in the preparation of amidoamine dendron-based co-adsorbents, which finds application in dye- sensitized solar cells improvement. It is also used in the synthesis of butyrate ester, which is used as a perfume and flavor. Further, it acts as a fumigant to drive bees from their hives. In addition to this, it is used in food additives, textile auxiliaries, varnishes, perfumes, pharmaceuticals and disinfectants.
主な応用
Because of its odor, butyric anhydride has use as a fumigant to drive bees from their hives in products such as Bee - Go.
製造方法
To a cooled flask containing 88 gm (1.0 mole) of η-butyric acid at 10°C is added dropwise 28.0 gm (0.5 mole) of methoxyacetylene over a 1-hr period. After stirring the reaction mixture for 16 hr at 20°C the contents are distilled to afford the following three fractions: (1) b.p. 56°C, η& 1.3628, 23 gm (62%), methyl acetate; (2) b.p. 72-73°C (18 mm Hg), n% 1.3990, 10.0 gm (11%), butyric acid; (3) b.p. 91-92°C (18mmHg), 1.4118, 48.0 gm (61%), butyric anhydride.
一般的な説明
Water-white liquid with an odor of rancid butter. Flash point 190°F. Density 8.0 lb / gal. Corrosive to metals and tissue. Low toxicity.
空気と水の反応
Slowly reacts with water to form butyric acid.
反応プロフィール
Butyric anhydride reacts exothermically with water. The reaction is usually slow, but might become violent if local heating accelerates their rate. Acids accelerate the reaction with water. Incompatible with acids, strong oxidizing agents, alcohols, amines, and bases.
健康ハザード
TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Contact with molten substance may cause severe burns to skin and eyes. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
火災危険
Combustible material: may burn but does not ignite readily. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.
安全性プロファイル
Mildly toxic by
ingestion. A corrosive liquid. When heated
to decomposition it emits acrid smoke and
irritating vapors.
安全性
Butyric anhydride is a combustible, corrosive liquid. It is considered water sensitive.
純化方法
Dry the anhydride by shaking it with P2O5, then distilling it. [Beilstein 2 IV 802.]
酪酸無水物 上流と下流の製品情報
原材料
準備製品