二炭化三クロム
二炭化三クロム 物理性質
- 融点 :
- 1890°C
- 沸点 :
- 3800°C
- 比重(密度) :
- 6.68 g/mL at 25 °C (lit.)
- 外見 :
- 粉
- 比重:
- 6.68
- 色:
- グレー
- 電気抵抗率 (resistivity):
- 75.0 (ρ/μΩ.cm)
- 水溶解度 :
- 水に不溶。
- Crystal Structure:
- Orthorhombic
- 安定性：:
- Corroded by molten metals Ni, Zn, Cu, Cd, Al, Mn, and Fe. Corrosion resistant in molten Sn and Bi.
- InChIKey:
- UFGZSIPAQKLCGR-UHFFFAOYSA-N
- EPAの化学物質情報:
- Chromium carbide (Cr3C2) (12012-35-0)
安全性情報
- リスクと安全性に関する声明
- 危険有害性情報のコード(GHS)
| RIDADR |
UN3178 |
|
|
| WGK Germany |
3 |
|
|
| TSCA |
Yes |
|
|
| 国連危険物分類 |
4.1 |
|
|
| 容器等級 |
III |
|
|
| 絵表示（GHS） |
|
| 注意喚起語 |
|
| 危険有害性情報 |
| コード |
危険有害性情報 |
危険有害性クラス |
区分 |
注意喚起語 |
シンボル |
P コード |
| H228 |
可燃性固体 |
可燃性固体 |
1
2 |
危険
警告 |
|
P210, P240,P241, P280, P370+P378 |
|
| 注意書き |
| P210 |
熱/火花/裸火/高温のもののような着火源から遠ざ けること。－禁煙。 |
| P240 |
容器を接地すること/アースをとること。 |
| P241 |
防爆型の電気機器/換気装置/照明機器/．．．機器を使 用すること。 |
| P280 |
保護手袋/保護衣/保護眼鏡/保護面を着用するこ と。 |
|
| メーカー |
製品番号 |
製品説明 |
CAS番号 |
包装 |
価格 |
更新時間 |
購入 |
|
富士フイルム和光純薬株式会社(wako)
|
W01SRM93-2432 |
炭化クロム
Chromium Carbide |
12012-35-0 |
50g |
￥18900 |
2024-03-01 |
購入 |
|
富士フイルム和光純薬株式会社(wako)
|
W01SRM93-2432 |
炭化クロム
Chromium Carbide |
12012-35-0 |
250g |
￥77800 |
2024-03-01 |
購入 |
|
Sigma-Aldrich Japan
|
GF45691465 |
powder, max. particle size 45 micron, weight 50?g, purity 99%
Chromium carbide powder, max. particle size 45 micron, weight 50?g, purity 99% |
12012-35-0 |
1EA |
￥36500 |
2024-03-01 |
購入 |
|
Sigma-Aldrich Japan
|
402680 |
炭化クロム ?325?mesh
Chromium carbide ?325?mesh |
12012-35-0 |
50g |
￥15700 |
2023-06-01 |
購入 |
二炭化三クロム 化学特性,用途語,生産方法
化学的特性
Orthorhombic crystals.
Highest oxidation resistance at high temperature of
all metal carbides also resistant to acids and alkalies.
使用
Chromium carbide (Cr3C2) ceramics has proved to be a potentially useful material because of its excellent electrocal conductivity, high degree of hardness,moderate melting point, and good chemical stability.
Chromium carbides are hard and their general use is to provide hard wear-resistant coatings on parts that need to be protected. When combined with a protective metal matrix, corrosion-resistant as well as wear-resistant coatings can be developed that are easy to apply and cost effective. These coatings are applied by either welding or thermal spray. When combined with other carbides, chromium carbide can be used to form cutting tools.
Chromium carbide welding electrodes are increasingly used instead of the earlier ferrochrome/carbon-containing electrodes, as they give superior and more consistent results. In ferrochrome/carbon-containing welding electrodes, chromium carbide is created during the welding process to provide a hard wear resistant layer. However, the formation of the carbides is determined by the precise conditions in the weld and therefore there can be variation between welds which is not seen with electrodes containing chromium carbide. This is reflected in the wear resistance of the weld deposit. Using the dry sand rubber wheel test, wear rates of welds deposited from ferrochrome/carbon electrodes have been found to be up to 250% greater compared to chromium carbide.
二炭化三クロム 上流と下流の製品情報
原材料
準備製品
二炭化三クロム 生産企業
Global( 137)Suppliers
12012-35-0(二炭化三クロム)キーワード:
- 12012-35-0
- chromiumcarbide(cr3c2)
- CR3C2 160
- CR3C2 300
- CHROMIUM CARBIDE
- CHROMIC CARBIDE
- CHROMIUM (IC) CARBIDE
- Chromiumcarbidegraypowder
- trichromium dicarbide
- CR3C2 160 CHROMIUM CARBIDE, GRADE 160 - A PRODUCT OF H.C. STARCK
- CR3C2 300 CHROMIUM CARBIDE, GRADE 300 - A PRODUCT OF H.C. STARCK
- Chrome carbide
- CHROMIUM CARBIDE, -325 MESH
- Chromiumcarbide,99.5%(metalsbasis)
- Chromiumcarbide,99.7%
- Chromium carbide powder (CrC)
- Chromium carbon
- Cromium carbide
- Chromium carbide, min. 97.5%
- Cr3C2)Chromium carbide
- Chromium carbide powder (Cr3C2)
- Chromium carbide nanopowder, APS <100 nm, 99.9%
- Chromium carbide powder (Cr3C2) 1 μm
- Chromium carbide nanopowder, APS <100 nm
- methanidylidynechromium
- chromium(II) carbide
- 炭化クロム
- 炭化クロム(Cr3C2)
- クロム-炭素
- 二炭化三クロム
- クロムカーバイド
- 炭化クロム（II）