ARSINE suppliers
ARSINE
- CAS:
- 7784-42-1
- MF:
- AsH3
- MW:
- 77.94542
Properties
- Melting point:
- -117°
- Boiling point:
- bp -62.5°
- Density
- 1.321 (estimate)
- vapor pressure
- >760 mmHg at 20 °C
- solubility
- slightly soluble in H2O
- form
- colorless gas
- color
- colorless
- Odor
- Garlic-like odor detectable at 0.5 to 1 ppm
- Water Solubility
- mL/100g H2O (760mm): 42 (0°C), 30 (10°C), 28 (20°C) [LAN05]
- Exposure limits
- TLV-TWA 0.2 mg/m3 (0.05 ppm) (ACGIH and OSHA); 0.002 mg(As)/m3/15 min; ceiling 0.005 ppm(As)/15 min (NIOSH).
- Dielectric constant
- 2.5(-100℃)
- Stability:
- Stable, but pyrophoric. Capable of detonation with some initiators. Flammable. Incompatible with oxidizing agents, chlorine, nitric acid.
Safety Information
- Symbol(GHS)
GHS02,GHS04,GHS06,GHS08,GHS09
- Signal word
- Danger
- Hazard statements
- H220-H330-H373-H410
- Precautionary statements
- P210-P377-P381-P403-P260-P271-P284-P304+P340-P310-P320-P403+P233-P405-P501-P260-P314-P501-P273-P391-P501
- Hazard Codes
- F+,T+,N
- Risk Statements
- 12-26-48/20-50/53
- Safety Statements
- 9-16-28-33-36/37-45-60-61
- RIDADR
- 2188
- OEL
- Ceiling: 0.002 mg/m3 [15-minute]
- Autoignition Temperature
- Not established. Decomposes at 232 to 300 °C to form elemental arsenic and hydrogen.
- DOT Classification
- 2.3, Hazard Zone A (Gas poisonous by inhalation)
- HazardClass
- 2.3
- Toxicity
- LCLO inhal (rat) 94 ppm (300 mg/m3; 15 min)
PEL (OSHA) 0.05 ppm (0.2 mg/m3)
TLV-TWA (ACGIH) 0.05 ppm (0.16 mg/m3)
- IDLA
- 3 ppm
Use
ARSINE is used as a doping agent for solidstateelectronic components and as a militarypoison gas. Risk of exposure may arise whenan arsenic compound reacts with an acid ora strong alkali.
According to relevant laws, regulations, policies and the provisions of this website, this website does not display the product information!
The source is "剧毒、有毒、易致癌化学品". If the information is inaccurate, please contact the platform to modify it.
contact information:info@chemicalbook.com 400-158-660