CIS-2-PENTENE manufacturers
- CIS-2-PENTENE
-
- $15.00 / 1KG
-
2021-08-12
- CAS:627-20-3
- Min. Order: 1KG
- Purity: 99%+ HPLC
- Supply Ability: Monthly supply of 1 ton
|
| CIS-2-PENTENE Basic information |
| CIS-2-PENTENE Chemical Properties |
Melting point | -180 °C (lit.) | Boiling point | 37-38 °C (lit.) | density | 0.65 g/mL at 25 °C (lit.) | vapor pressure | 8.17 psi ( 20 °C) | refractive index | n20/D 1.382(lit.) | Fp | −1 °F | storage temp. | Flammables area | solubility | Soluble in alcohol, benzene, and ether (Weast, 1986) | pka | >14 (Schwarzenbach et al., 1993) | form | Liquid | Specific Gravity | 0.650 | color | Clear colorless | Water Solubility | 203 mg/kg at 25 °C (shake flask-GC, McAuliffe, 1966) | BRN | 1718794 | Henry's Law Constant | 0.225 at 25 °C (approximate - calculated from experimentally determined water solubility and
vapor pressure values) | Stability: | Stable. Highly flammable - note low flash point. Incompatible with oxidizing agents. | CAS DataBase Reference | 627-20-3(CAS DataBase Reference) | EPA Substance Registry System | cis-2-Pentene (627-20-3) |
| CIS-2-PENTENE Usage And Synthesis |
Chemical Properties | colourless liquid | Physical properties | Clear, colorless, flammable liquid with a disagreeable odor. | Uses | Polymerization inhibitor; organic synthesis. | Uses | cis-2-Pentene was used to study the adsorption of cis-2-pentene on clean and D2 preadsorbed Pd(111) surface. | General Description | A colorless liquid with a hydrocarbon odor. Usually found as a technical grade consisting of a mixture of isomers. Insoluble in water. Used as a solvent in organic synthesis and as a polymerization inhibitor. | Air & Water Reactions | Highly flammable. Insoluble in water. | Reactivity Profile | The unsaturated aliphatic hydrocarbons, such as 2-PENTENE, are generally much more reactive than the alkanes. Strong oxidizers may react vigorously with them. Reducing agents can react exothermically to release gaseous hydrogen. In the presence of various catalysts (such as acids) or initiators, compounds in this class can undergo very exothermic addition polymerization reactions. | Source | Schauer et al. (2001) measured organic compound emission rates for volatile organic
compounds, gas-phase semi-volatile organic compounds, and particle-phase organic compounds
from the residential (fireplace) combustion of pine, oak, and eucalyptus. The gas-phase emission
rate of cis-2-pentene was 10.4 mg/kg of pine burned. Emission rates of cis-2-pentene were not
measured during the combustion of oak and eucalyptus.
California Phase II reformulated gasoline contained cis-2-pentene at a concentration of 2.29
g/kg. Gas-phase tailpipe emission rates from gasoline-powered automobiles with and without
catalytic converters were 0.44 and 42.3 mg/km, respectively (Schauer et al., 2002). | Environmental fate | Photolytic. The rate constant for the reaction of cis-2-pentene and OH radicals in the
atmosphere at 300 K is 3.9 x 10-13 cm3/molecule?sec (Hendry and Kenley, 1979). Atkinson (1990)
reported a rate constant of 6.50 x 10-11 cm3/molecule?sec for the same reaction.
Chemical/Physical. Complete combustion in air yields carbon dioxide and water. | Purification Methods | Dry it with sodium wire and fractionally distil it, or purify it by azeotropic distillation with MeOH, followed by washing out the MeOH with water, drying and distilling. Also purify it by chromatography through silica gel and alumina [Klassen & Ross J Phys Chem 91 3668 1987]. [Beilstein 1 IV 814.] |
| CIS-2-PENTENE Preparation Products And Raw materials |
|