- 3-Buten-1-ol
-
- $50.00 / 1kg
-
2025-04-16
- CAS:627-27-0
- Min. Order: 1kg
- Purity: 99
- Supply Ability: 5000
- 3-Buten-1-ol
-
- $0.00 / 25kg
-
2025-04-01
- CAS:627-27-0
- Min. Order: 1kg
- Purity: 99%
- Supply Ability: 10000KGS
- 3-Buten-1-ol
-
- $10.00 / 1KG
-
2025-03-31
- CAS:627-27-0
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: 5tons
|
| | 3-Buten-1-ol Chemical Properties |
| Melting point | -31.44°C (estimate) | | Boiling point | 112-114 °C (lit.) | | density | 0.838 g/mL at 25 °C (lit.) | | refractive index | n20/D 1.421(lit.) | | Fp | 90 °F | | storage temp. | Sealed in dry,Store in freezer, under -20°C | | solubility | soluble in Chloroform, Methanol | | pka | 15.04±0.10(Predicted) | | form | Liquid | | color | Clear colorless to slightly yellow | | Specific Gravity | 0.843 | | explosive limit | 2-28%(V) | | Water Solubility | SOLUBLE | | BRN | 1633504 | | Stability: | Stable. Incompatible with acids, acid chlorides, acid anhydrides, oxidizing agents. Flammable. | | InChIKey | ZSPTYLOMNJNZNG-UHFFFAOYSA-N | | LogP | 0.679 (est) | | CAS DataBase Reference | 627-27-0(CAS DataBase Reference) | | NIST Chemistry Reference | 3-Buten-1-ol(627-27-0) | | EPA Substance Registry System | 3-Buten-1-ol (627-27-0) |
| Hazard Codes | Xi | | Risk Statements | 10-36/37/38 | | Safety Statements | 16-26-36 | | RIDADR | UN 1987 3/PG 3 | | WGK Germany | 3 | | TSCA | Yes | | HazardClass | 3 | | PackingGroup | II | | HS Code | 29052990 |
| | 3-Buten-1-ol Usage And Synthesis |
| Description |
3-Buten-1-ol(627-27-0) is a homoallyl alcohol. It is employed in a study of the Mn-catalyzed hydrohydrazination of olefins. It is also used in a study of the conversion of propargylic acetates to ethers catalyzed by ferric chloride1. It can also be used as a starting reagent in asymmetric total synthesis of natural seimatopolide B. It was also used in the synthesis of catalytic bimetallic nanoparticles2.
| | Chemical Properties | liquid | | Uses | Employed in a study of the Mn-catalyzed hydrohydrazination of olefins. Also used in a study of the conversion of propargylic acetates to ethers cataylzed by ferric chloride. | | Uses | 3-Buten-1-ol is employed in a study of the Mn-catalyzed hydrohydrazination of olefins. Also used in a study of the conversion of propargylic acetates to ethers catalyzed by ferric chloride. | | Uses | 3-Buten-1-ol is an aliphatic primary alcohol used as a reagent in organic synthesis. | | Definition | ChEBI: 3-Buten-1-ol is a primary alcohol. | | General Description | 3-Buten-1-ol is a homoallyl alcohol that can be prepared by the dehydration of 1,4-butanediol using cerium catalyst. The intramolecular hydrogen bonding of 3-buten-1-ol has been studied using FT-IR and 1H NMR spectroscopic data. Its microwave spectrum has been recorded and analyzed. The alkylation reaction of 3-buten-1-ol using titanium-organoaluminum system has been studied. Its gas-phase enthalpy of formation has been reported to be -147.3 ± 1.8kJ mol-1. | | Hazard | 3-Buten-1-ol is strongly irritating to the skin and eyes. it may cause respiratory irritation. it is toxic to aquatic organisms and has long lasting effects. | | Synthesis | The synthesis of 3-Buten-1-ol is as follows:After adding 24.3 g (1 mol) of magnesium turnings, 50 g of diethyl ether and 1 ml of dibromoethane in a 500 mL four-necked flask,A solution of 62.5 g of vinyl chloride (1 mol) dissolved in 200 g of diethyl ether was added dropwise to magnesium and diethyl ether, and the micro reflux was controlled, and the dropwise addition was completed, and the mixture was kept under a micro reflux for 2 hours, and the temperature was lowered to -5 °C;Then 44 g (1 mol) of ethylene oxide was dissolved in 60 g of diethyl ether. Ethylene oxide is added dropwise to the vinylmagnesium chloride solution prepared above, control the temperature -5-5 degrees, and stir at this temperature for 1 hour. Sampling gas phase analysis until the reaction is complete; pour the reaction solution into a 1000 mL beaker, Add 200mL of ice water and add ammonium chloride until the residual magnesium disappears. Control the temperature 0-10 ° C, stir for 1 hour after the addition, add salt to saturation, static layering. The organic layer was separated and washed twice with 100 ml of saturated brine, and a polymerization inhibitor was added. The product is subjected to rectification to obtain 53 g of 3-buten-1-ol, and the content is 99.2%. The yield was 73.6%. 
|
| | 3-Buten-1-ol Preparation Products And Raw materials |
|