- Fumaryl chloride
-
- $6.60 / 1KG
-
2020-01-03
- CAS: 627-63-4
- Min. Order: 1KG
- Purity: 97%-99%
- Supply Ability: 1kg -1000kg
|
| | Fumaryl chloride Basic information |
| | Fumaryl chloride Chemical Properties |
| | Fumaryl chloride Usage And Synthesis |
| Chemical Properties | Clear yellow liquid | | Uses | Chemical intermediate for pharmaceuticals,
dyestuffs, and insecticides. | | Uses | Fumaryl chloride was used in the preparation of high molecular weight poly(propylene fumarate). The photodissociation dynamics of fumaryl chloride was studied. It is used in agrochemicals and pharmaceuticals manufacturing. Also used as an intermediate for dyes, textile auxiliaries and peroxide compounds. It is an acid halide building block. | | Preparation | Fumaryl chloride has been prepared from fumaric acid and phthaloyl chloride, from maleic acid by the action of thionyl chloride in the presence of zinc chloride, and from maleic anhydride by the use of phthaloyl chloride in the presence of zinc chloride.
Org. Synth. 1940, 20, 51
DOI: 10.15227/orgsyn.020.0051 | | General Description | Fumaryl chloride appears as a straw colored fuming liquid with a pungent odor. Vapors irritate the eyes and mucous membranes. Corrosive to metals and tissue. | | Reactivity Profile | Fumaryl chloride is incompatible with strong oxidizing agents, alcohols, amines and other bases. May react vigorously or explosively if mixed with diisopropyl ether or other ethers in the presence of trace amounts of metal salts [J. Haz. Mat., 1981, 4, 291]. | | Hazard | Corrosive to eyes and skin. | | Health Hazard | TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Contact with molten substance may cause severe burns to skin and eyes. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. | | Fire Hazard | Combustible material: may burn but does not ignite readily. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water. | | Safety Profile | Moderately toxic by
ingestion, inhalation, and skin contact. A
skin, eye, and mucous membrane irritant. A
corrosive agent. Will react with water or
steam to produce toxic and corrosive fumes.
When heated to decomposition it emits
highly toxic fumes of phosgene and HCl. |
| | Fumaryl chloride Preparation Products And Raw materials |
| Raw materials | Thionyl chloride-->Phosphorus pentachloride-->Zinc chloride-->Maleic anhydride-->Fumaric acid-->Phthaloyl dichloride | | Preparation Products | TRANS-1,2-DIBENZOYLETHYLENE-->2,4-DIBROMOMESITYLENE-->(E)-2,2'-vinylenebis[5-methylbenzoxazole]-->BIS(2,2,2-TRIFLUOROETHYL)MALEATE-->(Z)-4-((4-acetamidophenyl)amino)-4-oxobut-2-enoic acid-->2-Butene-1,4-dione,1,4-bis(4-chlorophenyl)--->Dyclonine Impurity 3-->bis(2,4,6-tribromophenyl) fumarate |
|