- Tributyl phosphate
-
- $100.00 / 50kg
-
2024-08-24
- CAS:126-73-8
- Min. Order: 1kg
- Purity: 99%
- Supply Ability: 5000Ton
- Tributyl phosphate
-
- $6.00 / 1kg
-
2024-08-23
- CAS:126-73-8
- Min. Order: 1kg
- Purity: 99%
- Supply Ability: 2000KG/Month
- Tributyl phosphate
-
- $2.00 / 200kg
-
2024-08-23
- CAS:126-73-8
- Min. Order: 1kg
- Purity: ≥99%
- Supply Ability: 2000mt/year
Related articles - What is Tributyl phosphate?
- Tributyl phosphate Tributyl phosphate (TBP) is a toxic organophosphorous compound widely used in nuclear processing, chemical ....
- Feb 26,2020
|
| Tributyl phosphate Chemical Properties |
Melting point | -79 °C (lit.) | Boiling point | 180-183 °C/22 mmHg (lit.) | density | 0.979 g/mL at 25 °C (lit.) | vapor density | 9.2 (vs air) | vapor pressure | 27 mm Hg ( 178 °C) | refractive index | n20/D 1.424(lit.) | Fp | 380 °F | storage temp. | Store below +30°C. | solubility | water: soluble1ml in 165ml water | form | Liquid | color | Clear | Odor | Odorless | Water Solubility | 0.6 g/100 mL | Merck | 14,9618 | BRN | 1710584 | Exposure limits | TLV-TWA 2.18 mg/m3 (0.2 ppm) (ACGIH), 5 mg/m3 (OSHA and NIOSH); IDLH 1300 mg/m3 (120 ppm) (NIOSH). | Dielectric constant | 6.5(20℃) | Stability: | Stable. Combustible. Incompatible with strong oxidizing agents. May be water sensitive. | LogP | 4 at 20℃ | CAS DataBase Reference | 126-73-8(CAS DataBase Reference) | NIST Chemistry Reference | Tri-n-butylphosphate(126-73-8) | EPA Substance Registry System | Tributyl phosphate (126-73-8) |
| Tributyl phosphate Usage And Synthesis |
Chemical Properties |
Tributyl phosphate (126-73-8);is an odorless colorless to yellow liquid. The solubility of TBP is only 280 mg/L in water at 25°C. It is soluble in diethyl ether, benzene, carbon disulfide. It can be miscible with ethanol. It is stable, but it is incompatible with strong oxidizing agents.
![Tributyl phosphate](https://www.chemicalbook.com/NewsImg/2020-08-05/20208518153416852.jpg)
Tributyl phosphate (TBP) is an organophosphorus compound widely used as a solvent in nuclear fuel reprocessing for the extraction of uranium and plutonium from other radionuclides.
The major uses of tributyl phosphate (TBP) in industry are as a flame retardant component of aircraft hydraulic fluid and as a solvent for rare earth extraction and purification. Minor uses of TBP include use as a defoamer additive in cement casings for oil wells, as an anti-air entrainment additive for coatings and floor finishes, as a solvent in nuclear fuel processing, and as a carrier for fluorescent dyes.
The microbial degradation of tributyl phosphate was carried out using Klebsiella pneumoniae S3 isolated from the soil. The solubilization behavior of TBP in aqueous solutions of L64-Pluronics was studied using light and small angle neutron scattering (SANS).
| Uses |
Tributyl phosphate (TBP,126-73-8) is a trialkyl phosphate that is the tributyl ester of phosphoric acid. TBP is a toxic organophosphorous compound widely used in many industrial applications, including significant usage in nuclear processing. TBP is a solvent and plasticizer for cellulose esters such as nitrocellulose and cellulose acetate. The major uses of TBP in industry are as a component of aircraft hydraulic fluid and as a solvent for extraction and purification of rare earth metals from their ores, such as uranium and plutonium. TBP is used also in mercerizing liquids, where it improves their wetting properties. TBP is also used as a heat exchange medium. TBP is used in some consumer products such as herbicides and water thinned paints and tinting bases.
| Preparation |
Tributyl phosphate(126-73-8) is manufactured by reaction of phosphoryl chloride with n-butanol.
A 1-liter four-necked flask is fitted with an efficient condenser, an air-tight stirrer, a short-stemmed dropping funnel and a thermometer. Calcium chloride tubes are attached to the top of dropping funnel and the reflux condenser. 137 ml (111 g) of dry n-butyl alcohol, 132.5 ml (130 g) of dry pyridine and 140 ml of dry benzene are placed in the flask, which is stirred and cooled in an ice-salt mixture until the temperature falls to – 5° C. 40.5 ml (76.5 g) of freshly redistilled (b.p. 106-107° C) phosphorus oxychloride are dropwise added from the funnel at such a rate that the temperature does not rise above 10° C. When all phosphorus oxychloride has been added the reaction mixture is gently refluxed for 2 hours and cooled to room temperature. 250 ml of water are added in order to dissolve the pyridine hydrochloride, the benzene layer is separated, washed several times with water until the washings are neutral, and dried over anhydrous sodium or magnesium sulfate. The benzene is removed by evaporation and crude tributyl phosphate is purified by distillation in a vacuum. The fraction boiling at 160-162°/15 mm or 138-140°/6 mm is collected yielding 95 g of pure tributyl phosphate.
| Potential Exposure | The industrial application of this chemical is responsible for occupational exposure and environmental pollution. Exposure to TBP can be from ingestion, inhalation, or skin or eye contact. This exposure will most often happen from occupational use of hydraulic fluid. If TBP is released to the environment, it will bind tightly to dust particles in the air. Unbound TBP will break down in air. It will move slowly through soil because it will bind with soil particles. It may volatilize slowly from moist soil and water surfaces. It may build up in aquatic organisms. It will be broken down in water by microbes. | Description | On decomposition, TBP releases COx, toxic fumes of phosphoric acid, phosphorus oxides,
and/or phosphine. TBP is incompatible with strong oxidising agents and alkalis. The major
uses of TBP in industry are as a component of aircraft hydraulic fluid and as a solvent for
rare earth extraction and purification. Minor uses of TBP include use as a defoamer additive
in cement casings for oil wells, an anti-air entrainment additive for coatings and floor
finishes, as well as a carrier for fluorescent dyes. The major uses of TBP comprise over 80%
of the volume produced. | Chemical Properties | Stable, colorless liquid; odorless. Miscible
with most solvents and diluents; soluble in
water. Combustible. | Physical properties | Clear, colorless to pale yellow, odorless, slightly flammable, oily liquid | Uses | Tributyl phosphate is used as a plasticizer for cellulose esters, vinyl resins, and lacquers; and in making fireretardants, biocides, defoamers, and catalysts. | Uses | Tributyl phosphate is used as an antifoaming agent; plasticizer for cellulose esters, lacquers, plastic, and vinyl resins; component in hydraulic fluids for aircraft control systems. | Uses | Plasticizer for cellulose esters, lacquers, plastics, and vinyl resins. | Production Methods | Prepared by the reaction of phosphorus oxychloride with butyl alcohol. | Definition | ChEBI: A trialkyl phosphate that is the tributyl ester of phosphoric acid. | General Description | Tributyl phosphate is an organophosphorus compound, which is widely used as a flame retardant and plasticizer in a variety of industrial products. | Air & Water Reactions | Water insoluble. Reacts slowly with water under basic conditions. | Reactivity Profile | Tributyl phosphate is incompatible with strong oxidizing agents and strong bases. Attacks some forms of plastics and rubber . | Health Hazard | Tributyl phosphate is a neurotoxic compound and an irritant. The toxic effects are characteristic of organic phosphates. It inhibits cholinesterase activity and causes paralysis. Inaddition,itcancausedepressionofthecentralnervoussystem,aswellasirritationofthe skin,eyes,andrespiratorypassage.Inhalation toxicity data in the literature are inconsistent. The oral toxicity in rats was low; the LD50 value was reported as 1189 mg/kg (NIOSH 1986). The pure liquid instilled into rabbits’ eyes caused severe irritation but no permanent damage. The irritation effect on the skin is mild. Tributyl phosphate exhibited teratogenic effects in rats. There is no report on its carcinogenicity.. | Fire Hazard | Special Hazards of Combustion Products: Toxic fumes of PO x | Industrial uses | 1. As an antifoaming agent.
2. As a plasticizer for cellulose esters, lacquers, plastics, and vinyl resins.
3. As a complexing agent in the extraction of heavy metals, especially for the
extraction of metal ions from solutions of reactor products in nuclear fuel
reprocessing.
4. As an aircraft hydraulic fluid.
5. As a heat exchange medium and dielectric.
6. As a pigment-grinding agent. | Safety Profile | Poison by
intraperitoneal and intravenous routes.
Moderately toxic by ingestion, inhalation,
and subcutaneous routes. Experimental
reproductive effects. A skin, eye, and
mucous membrane irritant. Combustible
when exposed to heat or flame. To fight
fire, use CO2, dry chemical, fog, mist. When
heated to decomposition it emits toxic
fumes of POx. | Carcinogenicity | TBP was not genotoxic in a variety of
in vivo and in vitro assays.7 It has been suggested
that the carcinogenic effects of TBP are
species- and organ specific. The necrotic
actions of TBP (or a metabolite) on rat urinary
bladder epithelium may induce chronic repair
processes that cause the normal epithelium to
be transformed into its metaplastic and neoplastic
forms.
TBP was not teratogenic when administered
to rats and rabbits during gestation;
fetotoxic effects (delayed ossification and reduced
fetal body weights) occurred in rats at
doses that caused severe maternal toxicity.
There was no evidence of reproductive toxicity
or reproductive organ pathology in twogeneration
studies in rats fed TBP in the diet. | Environmental fate | Biological. Indigenous microbes in Mississippi River water degraded tributyl phosphate to
carbon dioxide. After 4 wk, 90.8% of the theoretical carbon dioxide had evolved (Saeger et al.,
1979).
Chemical/Physical. Complete hydrolysis yields 1-butanol and phosphoric acid via the
intermediates dibutyl phosphate and monobutyl phosphate (Thomas and Macaskie, 1996). | Purification Methods | The main contaminants in commercial samples are organic pyrophosphates, monoand dibutyl phosphates and butanol. It is purified by washing successively with 0.2M HNO3 (three times), 0.2M NaOH (three times) and water (three times), then fractionally distilled under vacuum. [Yoshida J Inorg Nucl Chem 24 1257 1962.] It has also been purified via its uranyl nitrate addition compound, obtained by saturating the crude phosphate with uranyl nitrate. This compound is crystallised three times from n-hexane by cooling to -40o, and then decomposed by washing with Na2CO3 and water. Hexane is removed by steam distillation; the water is then evaporated under reduced pressure, and the residue is distilled under reduced pressure. [Siddall & Dukes J Am Chem Soc 81 790 1959.] Alternatively, wash it with water, then with 1% NaOH or 5% Na2CO3 for several hours, then finally with water. Dry it under reduced pressure and fractionate it carefully under vacuum. It is a stable colourless oil, sparingly soluble in H2O (1mL dissolves in 165mL of H2O), but freely miscible in organic solvents. [Kuivila & Masterton J Am Chem Soc 74 4953 1952, Cox & Westheimer J Am Chem Soc 80 5441 1958, 31P NMR: Van Wazer J Am Chem Soc 78 5715 1956, Fertig et al. J Chem Soc 1488 1957, Beilstein 1 IV 1531.] | Waste Disposal | Tributyl phosphate is dissolved in a combustible solvent and is burned in a chemical incinerator equipped with an afterburner and scrubber. |
| Tributyl phosphate Preparation Products And Raw materials |
|