ホスフィニジンチタン(III)
安全性情報
- リスクと安全性に関する声明
- 危険有害性情報のコード(GHS)
絵表示(GHS) |
|
注意喚起語 |
危険 |
危険有害性情報 |
コード |
危険有害性情報 |
危険有害性クラス |
区分 |
注意喚起語 |
シンボル |
P コード |
H314 |
重篤な皮膚の薬傷?眼の損傷 |
皮膚腐食性/刺激性 |
1A, B, C |
危険 |
![](/GHS05.jpg) |
P260,P264, P280, P301+P330+ P331,P303+P361+P353, P363, P304+P340,P310, P321, P305+ P351+P338, P405,P501 |
|
注意書き |
P264 |
取扱い後は皮膚をよく洗うこと。 |
P264 |
取扱い後は手や顔をよく洗うこと。 |
P280 |
保護手袋/保護衣/保護眼鏡/保護面を着用するこ と。 |
P301+P330+P331 |
飲み込んだ場合:口をすすぐこと。無理に吐かせ ないこと。 |
P303+P361+P353 |
皮膚(または髪)に付着した場合:直ちに汚染された衣 類をすべて脱ぐこと/取り除くこと。皮膚を流水/シャワー で洗うこと。 |
P363 |
汚染された衣類を再使用す場合には洗濯をすること。 |
|
ホスフィニジンチタン(III) 価格
メーカー |
製品番号 |
製品説明 |
CAS番号 |
包装 |
価格 |
更新時間 |
購入 |
ホスフィニジンチタン(III) 化学特性,用途語,生産方法
化学的特性
hard, gray metallic powder(s) with hexagonal structure; prepared by heating phosphine with TiCl4; stable up to 1400°C; finds use as a catalyst in organic reactions [KIR83]
製造方法
2 g of Ti filings ground to pinhead size and 4 g of red P are weighed into a small ceramic or sintered clay cylindrical crucible. The materials are degassed by fanning with a high vacuum flame and then sealed (in vacuum) into a quartz pressure tube. The colder half of the tube is heated to 450 °C, while the Ti side is maintained at 950 °C. Two three-day periods are needed for the reaction. After the first period, the tube is slowly cooled for 3-4 hours, and the unreacted P is thus distilled into the cooler section. The grinding is carried out under CSS, which is then removed with alcohol and dried in a vacuum over NaOH at 120-140 ℃. Microscopic examination of the dark-gray metallic product should show no red phosphorus. The phosphorus quantity used for the second reaction stage should again correspond to an atomic ratio of 3 P: 1 Ti. The product treatment after the second three-day heating period is the same as after the first. The resultant phosphide does not correspond entirely to the formula TiP (maximum composition is TiP0 . 9 3 ).
ホスフィニジンチタン(III) 上流と下流の製品情報
原材料
準備製品
ホスフィニジンチタン(III) 生産企業
Global( 17)Suppliers
12037-65-9(ホスフィニジンチタン(III))キーワード:
- 12037-65-9
- TITANIUM PHOSPHIDE
- Titanium Phosphide, -100 Mesh
- Phosphinidynetitanium(III)
- Einecs 234-862-6
- Titanium phosphide (TiP)
- phosphanylidynetitanium
- TITANIUM PHOSPHIDE ISO 9001:2015 REACH
- titanium(III) phosphide
- りん化チタン
- ホスフィニジンチタン(III)
- チタンホスフィド