トロマンタジン·塩酸塩 化学特性,用途語,生産方法
効能
抗ウイルス薬
Originator
Viru-Merz,Merz,W. Germany,1973
Manufacturing Process
Adamantane is first reacted with chloroacetyl chloride to give
chloroacetylaminoadamantane.
2.3 g Na (0.1 g-atom) were dissolved in 75 ml dimethylamino-ethanol. Then
the excess alcohol was distilled off completely and the sodium salt developed
was dried in a vacuum. After drying, the salt was dissolved in about 200 ml
xylene. To thissolution.22.8 g (0.1 mol) chloroacetylaminoadamantane were added, heated for 10 hours under reflux in a 250-ml round-bottomed flask
with a reflux cooler, and the sodium chloride developed subsequently filtered
off.
Next the xylene was distilled away, the liquid residue dissolved in about 80 ml
carbon tetrachloride and the hydrochloride precipitated through introduction of
hydrochloric acid gas. The hydrochloride was dissolved in about 100 ml
acetone and the solvent subsequently distilled away, whereby excess
hydrochloric acid passed over with it. This operation was repeated until no
excess acid was present.
A large excess of petroleum ether was added in a 500 ml three-necked flask
provided with a stirrer and reflux cooler, to a concentrated acetonic solution of
the hydrochloride and stirred for at least 1 hour, whereby the desired
substance was deposited in a crystalline form. Finally, the substance was
filtered away and dried in a desiccator. 14 g of the substance (15% of theory)
were obtained.
Therapeutic Function
Antiviral
トロマンタジン·塩酸塩 上流と下流の製品情報
原材料
準備製品