POLYETHYLENEIMINE

POLYETHYLENEIMINE 구조식 이미지
카스 번호:
68307-89-1
상품명:
POLYETHYLENEIMINE
동의어(영문):
PEI;POLYETHYLENIMINE, BRANCHED;ETHYLENE IMINE POLYMER;POLYMIN P;EPOMINS(R);ETHYLENEIMINE RESIN;POLYETHYLENIMINE P-70;Paul-Ehrlich-Institut;POLYETHYLENEIMINE ON SILICA BEADS;Polyethylenimine,epichlorohydrinadduct
CBNumber:
CB3245697
분자식:
C5H10ClNO
포뮬러 무게:
135.59
MOL 파일:
68307-89-1.mol

POLYETHYLENEIMINE 속성

끓는 점
250 °C(lit.)
밀도
1.08 g/mL at 25 °C
증기압
9 mm Hg ( 20 °C)
굴절률
n20/D 1.5290
인화점
>230 °F
물리적 상태
점성 액체
색상
투명한
감도
Hygroscopic
CAS 데이터베이스
68307-89-1
EPA
Aziridine, homopolymer, reaction products with epichlorohydrin (68307-89-1)

안전

위험품 표기 Xi
위험 카페고리 넘버 36/37/38
안전지침서 26-36
WGK 독일 2
RTECS 번호 TQ7917000
F 고인화성물질 10-34
기존화학 물질 KE-01984

POLYETHYLENEIMINE C화학적 특성, 용도, 생산

화학적 성질

Clear yellow to amber solution

공업 용도

Polyetherimide (PEI) is an amorphous engineering thermoplastic characterized by high heat resistance, high strength and modulus, excellent electrical properties that remain stable over a wide range of temperatures and frequencies, and excellent processibility. Unmodified PEI resin is transparent and has inherent flame resistance and low-smoke evolution. The resin is produced as Ultem.
Polyetherimide resin is available in an unreinforced grade for general-purpose injection molding, blow molding, foam molding, and extrusion, in four glass-fiber-reinforced grades (10, 20, 30, and 40% glass), in bearing grades, and in several high-temperature grades. The unreinforced grade is available as a transparent resin and in standard and custom colors.
A key feature of polyetherimide is maintenance of properties at elevated temperatures. Polyetherimide has good creep resistance as indicated by its apparent modulus of 2403 MPa after 1000 h at 82 C under an initial applied load of 34.3 MPa.
The resin resists a broad range of chemicals under varied conditions of stress and temperatures. Compatibility has been demonstrated with aliphatic hydrocarbons and alcohols including gasoline and gasohol, mineral salt solutions, dilute bases, and fully halogenated hydrocarbons. Resistance to mineral acids is outstanding. The polymer is attacked by partially halogenated solvents such as methylene chloride and trichloroethane and by strong bases.

POLYETHYLENEIMINE 준비 용품 및 원자재

원자재

준비 용품


POLYETHYLENEIMINE 공급 업체

글로벌( 27)공급 업체
공급자 전화 이메일 국가 제품 수 이점
GIHI CHEMICALS CO.,LIMITED
+8618058761490
info@gihichemicals.com China 49999 58
Sigma-Aldrich 021-61415566 800-8193336
orderCN@merckgroup.com China 51471 80
Wuhan Excellent Voyage Chemical Co.,Ltd. 18771133548
3287174834@qq.com China 207 58
Shenzhen Popeye Biotechnology Co. Ltd. 0755-86320212
popeye02@qq.com China 310 58
Shaanxi DIDU pharmaceutical and Chemical Co., Ltd 15229059051
1027@dideu.com China 9967 58
Shanghai Saikerui Biotechnology Co. , Ltd. 021-58000709 15900491054
info@scrbio.com China 9268 58
Shanghai Beiwanta Biotechnology Co., Ltd. 021-67187366 19901745723
info@bwtlab.com China 9247 58

Copyright 2019 © ChemicalBook. All rights reserved