BROMOTRIFLUOROMETHANE suppliers
BROMOTRIFLUOROMETHANE
- CAS:
- 75-63-8
- MF:
- CBrF3
- MW:
- 148.91
Suppliers by country/region
Company Type
Properties
- Melting point:
- -168°C
- Boiling point:
- -58°C
- Density
- 1,58 g/cm3
- vapor pressure
- >760 at 20 °C (NIOSH, 1997)
- refractive index
- 1.2380
- solubility
- Soluble in chloroform (Weast, 1986) and many other solvents, particularly chlorinated hydrocarbons.
- form
- A gas
- color
- Colorless gas with an ether-like odor
- Water Solubility
- 0.03 wt % at 20 °C (NIOSH, 1997)
- Henry's Law Constant
- (atm?m3/mol): 0.500 at 25 °C (Hine and Mookerjee, 1975)
- Exposure limits
- NIOSH REL: TWA 1,000 ppm (6,100 mg/m3), IDLH 40,000 ppm; OSHA PEL: TWA 1,000 ppm.
Safety Information
- Symbol(GHS)
GHS07,GHS04
- Signal word
- Warning
- Hazard statements
- H280-H336-H420
- Precautionary statements
- P410+P403-P502-P261-P271-P304+P340-P312-P403+P233-P405-P501
- Risk Statements
- 20
- Safety Statements
- 23-36/37/39-38
- OEB
- A
- OEL
- TWA: 1000 ppm (6100 mg/m3)
- RIDADR
- 1009
- DOT Classification
- 2.2 (Nonflammable gas)
- HazardClass
- 2.2
- Toxicity
- LC50 (inhalation) for mice 381 gm/m3, rats 416 gm/m3 (quoted, RTECS, 1985).
- IDLA
- 40,000 ppm
Use
BROMOTRIFLUOROMETHANE may react with aluminum to produce substantial heat. Other halogenated hydrocarbons, such as fluorotrichloromethane, dichlorodifluoromethane, chlorodifluoromethane, tetrafluoromethane produce sufficient heat in this way to melt aluminum pieces. The vigor of the reaction appears to depend on the degree of fluorination and the vapor pressure [Chem. Eng. News 39(27):44 1961].
![](/images/jinicon.png)
According to relevant laws, regulations, policies and the provisions of this website, this website does not display the product information!
The source is "中国受控消耗臭氧层物质清单". If the information is inaccurate, please contact the platform to modify it.
contact information:info@chemicalbook.com 400-158-660