Selenic acid manufacturers and suppliers

Selenic acid suppliers

Properties

Melting point:: 58°C

Boiling point:: 260°C

Density: 1.407 g/mL at 25 °C

refractive index: n20/D 1.5174(lit.)

Flash point:: >230 °F

solubility: Miscible with sulfuric acid. Immiscible with ammonia.

form: Liquid

pka: 4.19±0.10(Predicted)

color: Colorless

PH: 2.74(1 mM solution);1.83(10 mM solution);0.97(100 mM solution)

Water Solubility: g/100g H2O: 426 (0°C), 567 (20°C), 1328 (30°C) [LAN05]; decomposed by alcohol [HAW93]

Merck: 14,8429

Exposure limits: ACGIH: TWA 0.2 mg/m3
NIOSH: IDLH 1 mg/m3; TWA 0.2 mg/m3

Stability:: Stable, but decomposes on heating. Non-flammable. Incompatible with metals, combustible materials. Hygroscopic.

Safety Information

Symbol(GHS): GHS05,GHS06,GHS08,GHS09

Signal word: Danger

Hazard statements: H301+H331-H315-H318-H373-H410

Precautionary statements: P273-P280-P301+P310+P330-P304+P340+P311-P305+P351+P338+P310-P314

Hazard Codes: T,N

Risk Statements: 23/24/25-34-50/53-33-23/25-41-38

Safety Statements: 23-26-36/37/39-45-61-60-28-20/21-16

RIDADR: UN 3264 8/PG 1

WGK Germany: 2

RTECS: VS6575000

TSCA: Yes

HazardClass: 8

PackingGroup: I

HS Code: 2811198090

Use

Selenic acid, LIQUID reacts exothermically with chemical bases (for example: amines and inorganic hydroxides) to form salts. The reactions can generate dangerously large amounts of heat in small spaces. A good oxidizing agent. May oxidize organic matter such as wood, cotton, fiberboard, etc.. Reacts with active metals, including iron and aluminum, and also less active metals, to dissolve the metal and liberate hydrogen and/or toxic gases. Can initiate polymerization in certain classes of organic compounds. Reacts with cyanide salts and compounds to release gaseous hydrogen cyanide. Flammable and/or toxic gases are also often generated with dithiocarbamates, isocyanates, mercaptans, nitrides, nitriles, sulfides, and weak or strong reducing agents. Additional gas-generating reactions occur with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), and even carbonates: the carbon dioxide gas from the last is nontoxic but the heat and spattering from the reaction can be troublesome. May often catalyze (increase the rate) of chemical reactions.

You can find Selenic acid suppliers, manufacturers, and distributors from countries such as China, United States and the United Kingdom here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.