- SODIUM SULPHIDE HYDRATE
-
- $15.00 / 1KG
-
2021-08-12
- CAS:1313-84-4
- Min. Order: 1KG
- Purity: 99%+ HPLC
- Supply Ability: Monthly supply of 1 ton
|
| Sodium sulfide nonahydrate Chemical Properties |
Melting point | 50 °C | Boiling point | 920°C | density | 1.427 | storage temp. | 2-8°C | solubility | Aqueous Acid (Slightly), Water (Sparingly) | form | Solid | color | colorless or slightly yellow | Specific Gravity | 1.427 | Water Solubility | 180 G/L (25 ºC) | Sensitive | Hygroscopic | Merck | 14,8681 | Stability: | Stable. Hygroscopic. Light-sensitive. Flammable. Avoid exposure to air, acids, oxidizers, strong bases, strong reducing agents, most common metals. | InChIKey | GDQBTRYKLOBMLL-UHFFFAOYSA-N | CAS DataBase Reference | 1313-84-4(CAS DataBase Reference) | EPA Substance Registry System | Sodium sulfide (Na2S), nonahydrate (1313-84-4) |
Hazard Codes | C,N,T | Risk Statements | 31-34-50-24-22 | Safety Statements | 26-45-61-36/37/39 | RIDADR | UN 1849 8/PG 2 | WGK Germany | 2 | RTECS | WE1925000 | F | 13 | TSCA | Yes | HazardClass | 8 | PackingGroup | II | HS Code | 28301010 | Toxicity | mouse,LD50,intraperitoneal,53mg/kg (53mg/kg),Comptes Rendus Hebdomadaires des Seances, Academie des Sciences. Vol. 257, Pg. 791, 1963. |
| Sodium sulfide nonahydrate Usage And Synthesis |
Physical Properties | The nonahydrate is a yellowish-white crystalline solid; tetragonal crystals; odor of hydrogen sulfide; the color changes on exposure to light and air, first turning to yellow and then becoming brownish-black, deliquescent; density 1.43 g/cm3; decomposes at about 50°C; very soluble in water; aqueous solution strongly alkaline; slightly soluble in alcohol; insoluble in ether.
| Uses | Sodium sulfide is used in making sulfur dyes; for dehairing of hides; removing sulfur from viscous rayon; engraving and lithography; cotton printing; manufacturing rubber; paper pulp; and as a photographic reagent. Other major applications are for treating paper and for extracting gold ores where oxidized metal ores are converted to sulfides prior to froth flotation. Sodium sulfide also is used in preparing many other sulfides and as an analytical reagent.
| Preparation | Sodium sulfide is prepared by heating sodium bisulfate with sodium chloride and coal above 950°C. The product mixture is extracted with water and the hydrated sulfide is obtained from the solution by crystallization:
NaHSO4 + NaCl + 2C → Na2S + 2CO2↑ + HCl↑
Sodium sulfide also is produced from its elements in liquid ammonia:
Na + 2S → Na2S
| Reactions | Sodium sulfide in solid form reacts with carbon dioxide in the presence of moisture to form hydrogen sulfide and sodium carbonate. Thus, the H2S odor of sodium sulfide crystals is attributed to its exposure to moist air:
Na2S + H2O + CO2 → Na2CO3 + H2S
In aqueous solution, sodium sulfide reacts with a number of metal salts forming insoluble sulfides.
When added to dilute mineral acids, hydrogen sulfide is generated.
| Chemical Properties | colourless, white or yellow crystals with an odour of rotten eggs | Uses | It is the precursor material for preparation of cadmium sulfide quantum dots. Also employed in the pulp and paper industry. It is likewise employed in the making of colors and dyestuffs. It is too useful in the trace quantities for the rapid synthesis of small silver nanocubes through mediating polyol reduction. It has as a significant role in breaking up the feather keratin useful for the preparation of bio-polymer. | Uses | Sodium sulfide nonahydrate has been used as a source of H2S, to study the effect of H2S on amyloid fibrils associated with neurodegenerative diseases. It has been used in the preparation of sulfide standards for the quantitative analysis of sulfides in raw wastewater (sewage) samples. It serves as a catalyst during synthesis of thioamides. | Uses | sodium sulphide nonahydrate has the following uses:sulfur dyestuff; leather depilatory;rayon denitration;dyeing auxiliary;sodium sulphide;including crystallization water; sodium sulphide or sulfureT;dyeing auxiliary. | General Description | Sodium sulfide nonahydrate participates in the conversion of nitroxides to amines, via reduction. | Purification Methods | Some purification of the hydrated salt can be achieved by selecting large crystals and removing the surface layer (contaminated with oxidation products) by washing with distilled water. Other metal ions can be removed from Na2S solutions by passage through a column of Dowex ion-exchange A-1 resin, Na+-form. The hydrated salt can be rendered anhydrous by heating it in a stream of H2 or N2 until water is no longer evolved. (The resulting cake should not be heated to fusion because it is readily oxidised.) Recrystallise it from distilled water [Anderson & Azowlay J Chem Soc, Dalton Trans 469 1986]. Note that sodium sulfide hydrolyses in H2O to form NaHS + H2O, and is therefore alkaline. A 0.1N solution in H2O is 86% hydrolysed at room temperature. Its solubility in H2O is 8% at 0o, 12% at 20o and 30% at 50o. The anhydrous salt is obtained by allowing it to stand in a vacuum over conc H2SO4 or P2O5 at 45o to start with, then at 30-35o when the salt contains 4% of water. The last traces of water are removed by heating to 700o in a glass or porcelain tube in a stream of H2 to give pure H2S. [Fehér in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I pp 358-360 1963.] |
| Sodium sulfide nonahydrate Preparation Products And Raw materials |
Raw materials | Sodium hydroxide-->Methanol-->Sodium sulfate-->Barium sulfate-->METALLURGICAL COKE | Preparation Products | Sodium carbonate-->Sodium sulfite-->o-Phenylenediamine-->1-Naphthylamine-->m-Toluidine-->p-Toluidine-->5-Aminonicotinic acid-->Thioglycolic acid-->1,3-Adamantanediol-->Fluorescein isothiocyanate isomer I-->5-Fluoronicotinic acid-->2-Amino-4-nitrophenol-->3,3,4,4-diphenylsulfonetetracarboxylicdianhydride-->5-AMINO-1,2,3-THIADIAZOLE-4-CARBOXYLIC ACID ETHYL ESTER-->Thioacetic acid-->Thiomorpholine-->5-AMINO-2-METHYLBENZOTHIAZOLE-->4-(Propylthio)benzene-1,2-diamine-->3-BROMO-5-IODOBENZOIC ACID-->3-Bromo-5-nitrobenzoic acid-->3-AMINO-5-BROMO-BENZOIC ACID-->2,5-BIS(4-PYRIDYL)-1,3,4-THIADIAZOLE-->2,5-Thiophenedicarboxylic acid-->Selenium sulfide-->Diallyl sulfide-->3-Amino-5-nitrobenzoic acid-->Cyclohexyl disulfide-->1,2,3-BENZOTHIADIAZOLE-5-CARBOXYLIC ACID-->Dibutyl sulfide |
|