CYCLODODECANE manufacturers and suppliers in india

CYCLODODECANE

Properties

Melting point:: 59-61°C

Boiling point:: 111 °C / 17mmHg

Density: 0.790

vapor pressure: 9.83Pa at 20℃

refractive index: 1.4860 (estimate)

Flash point:: 88℃

storage temp.: Sealed in dry,Room Temperature

Water Solubility: 16μg/L at 20℃

Stability:: Stable. Combustible. Incompatible with strong oxidizing agents.

InChIKey: DDTBPAQBQHZRDW-UHFFFAOYSA-N

LogP: 7.6 at 25℃

Safety Information

Symbol(GHS): GHS07,GHS08,GHS09

Signal word: Danger

Hazard statements: H413

Precautionary statements: P273-P501

Safety Statements: 24/25

RIDADR: 1325

RTECS: GV2295000

HazardClass: 4.1

PackingGroup: III

HS Code: 29021990

Use

Cyclododecane can be applied as a solvent solution or a melt. There should be a consideration of the substrate when selecting an application methods. Cyclododecane is generally reapplied between treatments for works of art paper. Cyclododecane melts at about 60oC and can applied with a wax-melting stylus, heated spatula, melting the compound, and spraying machine. A rheostat may be used to control the temperatures of the tools used to apply cyclododecane. Brush application should not be used unless a solvent is added at lower melting point. Cyclododecane will solidify and form a film after cooling. On the other hand, an immediate transition in temperature will form a dense, homogeneous film. Cyclododecane can be dissolved in aromatic and non-polar solvents and applied by syringe, brush, or aerosol-spray. However, it is almost impossible to produce uniform films and numerous applications are needed to build up the film. It is important to note that a film layer should be produced using a saturated solution. The concentration of solid will fluctuate with use of a heated stirring tool and the choice of solvent.