Dimethoxymethane
Dimethoxymethane
- CAS:
- 109-87-5
- MF:
- C3H8O2
- MW:
- 76.09
Suppliers by country/region
Company Type
Properties
- Melting point:
- -105 °C
- Boiling point:
- 41-43 °C
- Density
- 0.860 g/mL at 20 °C(lit.)
- vapor density
- 2.6 (vs air)
- vapor pressure
- 6.38 psi ( 20 °C)
- refractive index
- n
20/D 1.354
- Flash point:
- -18 °C
- storage temp.
- Store at <= 20°C.
- solubility
- 32.3 g/100 mL (16°C)
- form
- Liquid
- pka
- 3.1[at 20 ℃]
- color
- Clear colorless
- Odor
- Mild, ethereal; chloroform-like.
- PH
- pH (12.5vol % , 25℃) : 4.5~6.6
- explosive limit
- 1.6-17.6%(V)
- Water Solubility
- 32.3 g/100 mL (16 ºC)
- Sensitive
- Moisture Sensitive
- Merck
- 14,6012
- BRN
- 1697025
- Henry's Law Constant
- (x 10-4 atm?m3/mol): 1.73 at 25 °C (Hine and Mookerjee, 1975)
- Exposure limits
- NIOSH REL: TWA 1,000 ppm (3,100 mg/m3), IDLH 2,200 ppm; OSHA PEL: TWA 1,000 ppm; ACGIH TLV: TWA 1,000 ppm (adopted).
- Dielectric constant
- 2.7(20℃)
- Stability:
- Stable. Extremely flammable. Readily forms explosive mixtures with air. Note low flash point and wide explosive limits. Incompatible with strong oxidizing agents, strong acids. May form explosive peroxides upon exposure to air.
- LogP
- 0
Safety Information
- Symbol(GHS)
GHS02
- Signal word
- Danger
- Hazard statements
- H225
- Precautionary statements
- P210-P233-P240-P241-P242-P243
- Hazard Codes
- F,Xi
- Risk Statements
- 11-19-36-36/37/38
- Safety Statements
- 16-26-33-7/9-37/39
- RIDADR
- UN 1234 3/PG 2
- OEB
- A
- OEL
- TWA: 1000 ppm (3100 mg/m3)
- WGK Germany
- 1
- RTECS
- PA8750000
- F
- 21
- Autoignition Temperature
- 459 °F
- TSCA
- Yes
- HS Code
- 2911 00 00
- HazardClass
- 3
- PackingGroup
- II
- Toxicity
- LD50 orally in Rabbit: 6653 mg/kg
- IDLA
- 2,200 ppm [10% LEL]
Use
Dimethoxymethane (Methylal) is a valuable extraction solvent for pharmaceutical products and a stable, inexpensive solvent for Grignard reactions. Methylal is stable under alkaline and mild acidic conditions. Its dissolving ability is stronger than ether, acetone, and methanol and azeotrope can dissolve nitrocellulose with high nitrogen content. Dimethoxymethane is mainly used in the production of anion-exchange resins, and also as solvents and special fuels.
18 India supplier list of "Dimethoxymethane"
- Product Name:Formaldehyde dimethyl acetal
- Products Intro:Purity: 98% | Package: 1 kg,5 kg, 10 kg,25kg
- Company Type: Manufacturer
- Country/Region: INDIA
- Product Name:Formaldehydedimethylacetal
- Products Intro:Brand:sigma aldrich | Product Number:47649 | Purity:forGrignardreactions,≥99.0%(GC)
- Company Type: Trader
- Country/Region: INDIA
- Product Name:Dimethoxymethane
- Company Type: Reagent
- Country/Region: INDIA
- Product Name:RevefenacinImpurity14
- Products Intro:Brand:synzeal | Product Number:152772740
- Company Type: Trader
- Country/Region: INDIA