Glycidol manufacturers and suppliers in india

Glycidol

Properties

Melting point:: -54 °C

Boiling point:: 61-62 °C/15 mmHg (lit.)

Density: 1.117 g/mL at 25 °C (lit.)

vapor density: 2.15 (vs air)

vapor pressure: 0.9 mm Hg ( 25 °C)

refractive index: n20/D 1.433(lit.)

Flash point:: 178 °F

storage temp.: -20°C

solubility: Soluble in acetone, alcohol, benzene, chloroform, and ether (Weast, 1986)

pka: 14.62±0.10(Predicted)

form: Powder, Crystals or Chunks

color: White to light yellow-beige

Water Solubility: soluble

Merck: 13,4503

BRN: 383562

Exposure limits: TLV-TWA 75 mg/m³ (25 ppm) (ACGIH); 150 mg/m³ (50 ppm) (OSHA); IDLH 500 ppm (NIOSH).

Stability:: Stability Stable, but may explode on contact with strong acids, strong bases, heavy metals, heavy metal salts. May decompose on exposure to water or moist air.

InChIKey: CTKINSOISVBQLD-UHFFFAOYSA-N

LogP: -0.95 at 25℃

Safety Information

Symbol(GHS): GHS06,GHS08

Signal word: Danger

Hazard statements: H302+H312-H315-H319-H330-H335-H341-H350-H360F

Precautionary statements: P202-P280-P301+P312-P302+P352+P312-P304+P340+P310-P305+P351+P338

Hazard Codes: T

Risk Statements: 45-60-21/22-23-36/37/38-68

Safety Statements: 53-45-36/37-26

OEB: A

OEL: TWA: 25 ppm (75 mg/m3)

RIDADR: UN 2810 6.1/PG 3

WGK Germany: 3

RTECS: UB4375000

F: 10-21

Autoignition Temperature: 780 °F

Hazard Note: Toxic

HazardClass: 6.1(b)

PackingGroup: III

HS Code: 29109000

Toxicity: Acute oral LD50 for mice 431 mg/kg, rats 420 mg/kg (quoted, RTECS, 1985).

IDLA: 150 ppm

Use

Glycidol is sensitive to moisture. Glycidol is also sensitive to light. Glycidol may polymerize if heated above room temperature. Glycidol may darken on storage. Stability studies of Glycidol stored for two week protected from light indicated definite decomposition at 140° F, and strongly indicated instability at 77° F. A solution of Glycidol in water was found to be unstable when stored at room temperature, even after one day in the dark. Glycidol is incompatible with strong oxidizers. Glycidol will undergo explosive decomposition in the presence of strong acids or bases, salts (such as aluminum chloride, iron(III)chloride or tin(IV) chloride) or metals (such as copper and zinc). Glycidol is also incompatible with nitrates. Glycidol will attack some forms of plastics, rubber and coatings.