Methyl methacrylate manufacturers and suppliers in india

Methyl methacrylate

Properties

Melting point:: -48 °C (lit.)

Boiling point:: 100 °C (lit.)

Density: 0.936 g/mL at 25 °C (lit.)

vapor density: 3.5 (vs air)

vapor pressure: 29 mm Hg ( 20 °C)

FEMA: 4002 | METHYL 2-METHYL-2-PROPENOATE

refractive index: n20/D 1.414(lit.)

Flash point:: 50 °F

storage temp.: 2-8°C

solubility: 15g/l

form: Crystalline Powder or Crystals

color: White to pale yellow

Odor: at 0.10 % in dipropylene glycol. acrylic aromatic fruity

Odor Type: acrylate

explosive limit: 2.1-12.5%(V)

Odor Threshold: 0.21ppm

Water Solubility: 15.9 g/L (20 ºC)

Merck: 14,5941

JECFA Number: 1834

BRN: 605459

Henry's Law Constant: 2.46 x 10^-4 atm?m³/mol at 20 °C (approximate - calculated from water solubility and vapor pressure)

Exposure limits: NIOSH REL: TWA 100 ppm (410 mg/m³), IDLH 1,000 ppm; OSHA PEL: TWA 100 ppm; ACGIH TLV: TWA 100 ppm with intended TWA and STEL values of 50 and 100 ppm, respectively.

Dielectric constant: 2.9（20℃）

Stability:: Volatile

InChIKey: VVQNEPGJFQJSBK-UHFFFAOYSA-N

LogP: 1.38 at 20℃

Safety Information

Symbol(GHS): GHS02,GHS07

Signal word: Danger

Hazard statements: H225-H315-H317-H335

Precautionary statements: P210-P233-P240-P241-P280-P303+P361+P353

Hazard Codes: F,Xi,T

Risk Statements: 11-37/38-43-39/23/24/25-23/24/25

Safety Statements: 24-37-46-45-36/37-16-7

OEB: A

OEL: TWA: 100 ppm (410 mg/m3)

RIDADR: UN 1247 3/PG 2

WGK Germany: 1

RTECS: OZ5075000

Autoignition Temperature: 815 °F

TSCA: Yes

HazardClass: 3

PackingGroup: II

HS Code: 29161410

Toxicity: The acute toxicity of methyl methacrylate is low. Irritation of the skin, eye, and nasal cavity has been observed in rodents and rabbits exposed to relatively high concentrations of methyl methacrylate. The chemical is a mild skin sensitizer in animals. The effect observed most frequently at lowest concentration after repeated inhalation exposure to methyl methacrylate is irritation of the nasal cavity. Effects on the kidney and liver at higher concentrations have also been reported.

IDLA: 1,000 ppm

Use

Methyl methacrylate (MMA) is a monomer that's also known as methacrylic acid, methyl ester. A key building block for acrylic-based polymers, MMA has applications that include safety glazing, exterior paints, vinyl impact modifiers, adhesives, illuminated light displays, and more.