Poly(3-hexylthiophene-2,5-diyl) manufacturers and suppliers in india

Poly(3-hexylthiophene-2,5-diyl)

CAS:: 104934-50-1

MF:: C10H14R2S

MW:: 166.28316

Suppliers by country/region

Company Type

Properties

Melting point:: 238 °C

Density: 1.02 g/cm3

solubility: chloroform, methylene chloride, toluene and THF: soluble

form: Powder/Chunks

color: red

Sensitive: Light Sensitive

Safety Information

Symbol(GHS): GHS07

Hazard statements: H315-H319-H335

Precautionary statements: P261-P280a-P304+P340-P305+P351+P338-P405-P501a

Hazard Codes: Xi

Risk Statements: 36/37/38

Safety Statements: 26-36

WGK Germany: 3

HS Code: 29309090

Use

Regioregular poly(3-hexylthiophene-2,5-diyl). Commonly known as P3HT. The highest regioregularity P3HT (M104, RR = 96.3%) produces highly crystalline films and is recommended for OFETs, nanofibril formation and fast drying OPVs at the thin interference peak (90 nm). However, the exceptionally high regioregularity of this P3HT means that gelling and surface roughness can be an issue for slow-drying thick-film OPVs (200 nm). Lower molecular weight and regioregularity P3HT is recommended for inkjet and other large area or slow drying deposition techniques where gelling/aggregation and surface roughness need to be avoided. A fabrication report with mobility measurements of 0.12 cm2/Vs for M104 can be found below. All the P3HT below is highly soluble (50 mg/ml) in chlorinated solvents such as chloroform, chlorobenzene, dichlorobenzene and trichlorobenzene. The intermediate and lower molecular weight P3HT materials are recommended for use with non-chlorinated solvents such as xylene, toluene and THF due to their increased solubility.