Acrylamide
![Acrylamide Structure](CAS/GIF/79-06-1.gif)
- CAS No.
- 79-06-1
- Chemical Name:
- Acrylamide
- Synonyms
- aam;2-PROPENAMIDE;PROPENAMIDE;Acrylic amide;prop-2-enamide;ACRYLAMIDE MONOMER;optimum;Acrylamid;ETHYLENECARBOXAMIDE;Vinyl amide
- CBNumber:
- CB4690458
- Molecular Formula:
- C3H5NO
- Molecular Weight:
- 71.08
- MOL File:
- 79-06-1.mol
- Modify Date:
- 2024/7/25 20:04:51
Melting point | 82-86 °C(lit.) |
---|---|
Boiling point | 125 °C25 mm Hg(lit.) |
Density | 1,322 g/cm3 |
vapor density | 2.45 (vs air) |
vapor pressure | 0.03 mm Hg ( 40 °C) |
refractive index | 1.460 |
Flash point | 138 °C |
storage temp. | 2-8°C |
solubility | 2040 g/L (25°C) |
pka | 15.35±0.50(Predicted) |
form | powder |
color | White |
Odor | Odorless solid |
PH | 5.0-7.0 (50g/l, H2O, 20℃) |
Water Solubility | Acrylamide is routinely tested at 250 mg/mL in water, giving a clear colorless solution. It is soluble at least to 40% (w/v) in water, and reportedly up to 215 g/100 mL in water at 30°C. |
Sensitive | Light Sensitive |
Merck | 14,129 |
BRN | 605349 |
Henry's Law Constant | (x 10-9 atm?m3/mol): 3.03 at 20 °C (approximate - calculated from water solubility and vapor pressure) |
Exposure limits | Potential occupational carcinogen. NIOSH REL: TWA 0.03, IDLH: 60; OSHA PEL: TWA 0.3; ACGIH TLV: TWA 0.03. |
Stability | Unstable. Do not heat above 50C. Explosive. Incompatible with acids, bases, oxidizing agents, reducing agents, iron and iron salts, copper, aluminium, brass, free radical initiators. Air sensitive. Hygroscopic. |
InChIKey | HRPVXLWXLXDGHG-UHFFFAOYSA-N |
LogP | -0.9 at 20℃ and pH7 |
CAS DataBase Reference | 79-06-1(CAS DataBase Reference) |
IARC | 2A (Vol. 60, Sup 7) 1994 |
NIST Chemistry Reference | Acrylamide(79-06-1) |
EPA Substance Registry System | Acrylamide (79-06-1) |
SAFETY
Risk and Safety Statements
Symbol(GHS) | ![]() ![]() GHS06,GHS08 |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
Signal word | Danger | |||||||||
Hazard statements | H301-H312+H332-H315-H317-H319-H340-H350-H361f-H372 | |||||||||
Precautionary statements | P202-P280-P301+P310-P302+P352+P312-P304+P340+P312-P305+P351+P338 | |||||||||
Hazard Codes | T | |||||||||
Risk Statements | 45-46-20/21-25-36/38-43-48/23/24/25-62-48/20/21/22-22-24/25 | |||||||||
Safety Statements | 53-45-24-36/37/39-26-36/37 | |||||||||
OEB | D | |||||||||
OEL | TWA: 0.03 mg/m3 [skin] | |||||||||
RIDADR | UN 3426 6.1/PG 3 | |||||||||
WGK Germany | 3 | |||||||||
RTECS | AS3325000 | |||||||||
F | 8-10 | |||||||||
TSCA | Yes | |||||||||
HazardClass | 6.1 | |||||||||
PackingGroup | III | |||||||||
HS Code | 29241900 | |||||||||
Toxicity | LD50 i.p. in mice: 170 mg/kg (Peterson, Sheth) | |||||||||
IDLA | 60 mg/m3 | |||||||||
NFPA 704 |
|
Acrylamide price More Price(55)
Manufacturer | Product number | Product description | CAS number | Packaging | Price | Updated | Buy |
---|---|---|---|---|---|---|---|
Sigma-Aldrich(India) | A9099 | Acrylamide for molecular biology, ≥99% (HPLC) | 79-06-1 | 25G | ₹3204.2 | 2022-06-14 | Buy |
Sigma-Aldrich(India) | A9099 | Acrylamide for molecular biology, ≥99% (HPLC) | 79-06-1 | 100G | ₹8973.93 | 2022-06-14 | Buy |
Sigma-Aldrich(India) | A9099 | Acrylamide for molecular biology, ≥99% (HPLC) | 79-06-1 | 500G | ₹14981.8 | 2022-06-14 | Buy |
Sigma-Aldrich(India) | A9099 | Acrylamide for molecular biology, ≥99% (HPLC) | 79-06-1 | 1KG | ₹17633.93 | 2022-06-14 | Buy |
Sigma-Aldrich(India) | A9099 | Acrylamide for molecular biology, ≥99% (HPLC) | 79-06-1 | 2.5KG | ₹35224.55 | 2022-06-14 | Buy |
Acrylamide Chemical Properties,Uses,Production
Description
Acrylamide is an odorless, white crystalline solid that initially
was produced for commercial purposes by reaction of acrylonitrile
with hydrated sulfuric acid.
Acrylamide exists in two forms: a monomer and a polymer.
Monomer acrylamide readily participates in radicalinitiated
polymerization reactions, whose products form the
basis of most of its industrial applications. The single unit
form of acrylamide is toxic to the nervous system, a carcinogen
in laboratory animals and a suspected carcinogen in
humans. The multiple unit or polymeric form is not known to
be toxic.
Acrylamide is formed as a by-product of the Maillard reaction.
The Maillard reaction is best known as a reaction that
produces pleasant flavor, taste, and golden color in fried and
baked foods; the reaction occurs between amines and carbonyl
compounds, particularly reducing sugars and the amino acid
asparagine. In the first step of the reaction, asparagine reacts
with a reducing sugar, forming a Schiff’s base. From this
compound, acrylamide is formed following a complex reaction
pathway that includes decarboxylation and a multistage elimination
reaction. Acrylamide formation in bakery products,
investigated in a model system, showed that free asparagine
was a limiting factor. Treatment of flours with asparaginase
practically prevented acrylamide formation. Coffee drinking
and smoking are other major sources apart from the human
diet.
Chemical Properties
Acrylamide, in monomeric form, is an odorless, flake-like crystals which sublime slow at room temperature. May be dissolved in a flammable liquid.
Uses
Over 90% of acrylamide is used to make polyacrylamides (PAMs), and the remaining 10% is used to make N-methylolacrylamide (NMA) and other monomers. Water treatment PAMs consumed 60% of the acrylamide; PAMs for pulp and paper production consume 20% of the acrylamide; and PAMs for mineral processing consume 10% of the acrylamide. Some of the specific uses of acrylamide are:
In liquid-solid separation where acrylamide polymers act as flocculants and aids in mineral processing, waste treatment and water treatment. They also help reduce sludge volumes in these applications.
As additives in the manufacture of paper and paper board products, leather and paint industries. In the paper industry PAMs act as retention aids during wet end processing and in wet strength additives.
In the manufacture of synthetic resins for pigment binders for textile/leather industries, and In enhanced oil recovery.
use in protein electrophoresis (PAGE), synthesis of dyes and copolymers for contact lenses. It is reasonably anticipated to be a hum an carcinogen.
Preparation
The principal synthetic route to making acrylamide involves the hydration of acrylonitrile (ACRN). In this process an aqueous ACRN solution reacts over a copper-oxide-chromium oxide catalyst at approximately 100°C. Several other catalyst systems have been used, and most of them contain copper - in some form. The reaction step is followed by purification and concentration to a 50% solution in a vacuum evaporator. The yield of acrylamide from ACRN is 98%. The purification and concentration steps are costly and also involve the recycle of ACRN back to the reaction step. In the early part of the new century, a catalytic distillation process has been developed that converts almost 100% of the ACRN to acrylamide and allows concentration to occur in the same column where acrylamide is made. Therefore this process is less costly.
Nitto Chemical (now Dia-Nitrix) introduced a biosynthetic route from ACRN to acrylamide in Japan in 1985. This process uses an immobilized nitrile hydratase biocatalyst that converts the ACRN solution to acrylamide with a yield of 99.5%. This high yield allows a concentrated acrylamide solution to be made without the need for ACRN recycle or solution concentration. This process therefore has lower energy costs.
Definition
ChEBI: A member of the class of acrylamides that results from the formal condensation of acrylic acid with ammonia.
General Description
A solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.
Air & Water Reactions
Acrylamide is very soluble in water. The solvent is not necessarily water soluble.
Reactivity Profile
ACRYLAMIDE SOLUTION reacts with azo and diazo compounds to generate toxic gases. Flammable gases are formed with strong reducing agents. Combustion generates mixed oxides of nitrogen (NOx). Spontaneous, violent polymerization occurs at the melting point (86°C of the undissolved solid [Bretherick, 5th ed., 1995, p. 428].
Health Hazard
The acute toxicity of acrylamide is moderate by ingestion or skin contact. Skin exposure leads to redness and peeling of the skin of the palms. Aqueous acrylamide solutions cause eye irritation; exposure to a 50% solution of acrylamide caused slight corneal injury and slight conjunctival irritation, which healed in 8 days. The chronic toxicity of acrylamide is high. Repeated exposure to ~2 mg/kg per day may result in neurotoxic effects, including unsteadiness, muscle weakness, and numbness in the feet (leading to paralysis of the legs), numbness in the hands, slurred speech, vertigo, and fatigue. Exposure to slightly higher repeated doses in animal studies has induced multisite cancers and reproductive effects, including abortion, reduced fertility, and mutagenicity. Acrylamide is listed in IARC Group 2B ("possible human carcinogen") and is classified as a "select carcinogen" under the criteria of the OSHA Laboratory Standard.
Flammability and Explosibility
The volatility of acrylamide is low (0.03 mmHg at 40 °C), and it does not pose a significant flammability hazard.
Chemical Reactivity
Reactivity with Water No reaction; Reactivity with Common Materials: Data not available; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: May occur at temperature above 50°C (120°F); Inhibitor of Polymerization: Oxygen (air) plus 50 ppm of copper as copper sulfate.
Contact allergens
Acrylamide is used in the plastic polymers industry for water treatments and soil stabilization and to prepare polyacrylamide gels for electrophoresis. This neurotoxic, carcinogenic, and genotoxic substance is known to have caused contact dermatitis in industrial and laboratory workers
Safety Profile
Confirmed carcinogen with experimental carcinogenic and neoplastigenic data. Poison by ingestion, skin contact, and intraperitoneal routes. Experimental reproductive effects. Mutation data reported. A skin and eye irritantIntoxication from it has caused a peripheral neuropathy, erythema, and peeling palms. In industry, intoxication is mainly via dermal route, next via inhalation, and last via ingestion. Time of onset varied from 1-24 months to 8 years. Symptoms were, via dermal route, a numbness, tingling, and touch tenderness. In a couple of weeks, coldness of extremities; later, excessive sweating, bluish-red and peeling palms, marked fatigue and limb weakness. It is dangerous because it can be absorbed through the unbroken skin. From animal experiments it seems to be a central nervous system toxin. Adult rats fed an average of 30 mg/kg for 14 days were all partially paralyzed and had reduced their food consumption by 50 percent. Polymerizes violently at its melting point. When heated to decomposition it emits acrid fumes and NOX,.
Potential Exposure
Added to water during sewage/wastewater treatment. Used in the manufacture of plastics, resins, rubber, synthetic textiles; as a dye, pigment. A major application for monomeric acrylamide is in the production of polymers as polyacrylamides. Polyacrylamides are used for soil stabilization, gel chromatography, electrophoresis, papermaking strengtheners, clarifications, and treatment of potable water and foods.
Carcinogenicity
Acrylamide is reasonably anticipated to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in experimental animals.
Environmental Fate
Biological. Bridié et al. (1979) reported BOD and COD values of 0.05 and 1.33 g/g using
filtered effluent from a biological sanitary waste treatment plant. These values were determined
using a standard dilution method at 20 °C for a period of 5 d. When a sewage seed was used in a
separate screening test, a BOD value of 0.92 g/g was obtained. In a treatment plant, a BOD value
of 0.40 g/g was reported after 10 d (Mills et al., 1953). The ThOD for acrylamide is 1.35 g/g.
Soil. Under aerobic conditions, acrylamide degraded to ammonium ions which oxidized to
nitrite ions and nitrate ions. The ammonium ions produced in soil may volatilize as ammonia or
accumulate as nitrite ions in sandy or calcareous soils (Abdelmagid and Tabatabai, 1982).
Chemical/Physical. Readily polymerizes at the melting point or under UV light. In the presence
of alkali, polymerization is a violent reaction. On standing, may turn to yellowish color (Windholz
et al., 1983).
storage
In particular, this substance should be handled only when wearing appropriate impermeable gloves to prevent skin contact, and all operations that have the potential of producing acrylamide dusts or aerosols of solutions should be conducted in a fume hood to prevent exposure by inhalation.
Shipping
UN2074 Acrylamide, Hazard Class: 6.1; Labels: 6.1-Poisonous materials
Purification Methods
Crystallise acrylamide from acetone, chloroform, ethyl acetate, methanol or *benzene/chloroform mixture, then vacuum dry and store it in the dark under vacuum. Recrystallise it from CHCl3 by dissolving 200g in 1L, heating to boiling and filtering without suction in a warmed funnel through Whatman 541 filter paper; allowing to cool to room temperature and keeping at -15o overnight. The crystals are collected with suction in a cooled funnel and washed with 300mL of cold MeOH. The crystals are air-dried in a warm oven. [Dawson et al. Data for Biochemical Research, Oxford Press 1986 p. 449, Beilstein 2 IV 1471.] CAUTION: Acrylamide is extremely TOXIC (neurotoxic), and precautions must be taken to avoid skin contact or inhalation. Use gloves and handle in a well-ventilated fume cupboard.
Incompatibilities
Acrylamide may decompose with heat and polymerize at temperatures above 84 C, or exposure to light, releasing ammonia gas. Reacts violently with strong oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Reacts with reducing agents; peroxides, acids, bases, and vinyl polymerization initiators. Fine particles of dust form explosive mixture with air.
Waste Disposal
Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Acrylamide residue and sorbent material may be packaged in epoxy-lined drums and taken to an EPAapproved disposal site. Incineration with provisions for scrubbing of nitrogen oxides from flue gases. Deep well injection.
Acrylamide Preparation Products And Raw materials
Raw materials
1of2
chevron_rightPreparation Products
1of8
chevron_rightSupplier | Tel | Country | ProdList | Advantage | Inquiry |
---|---|---|---|---|---|
Soham Chemical Industries | +91-7016081644 +91-7016081644 | Mumbai, India | 83 | 58 | Inquiry |
PAARICHEM RESOURCES LLP | +91-8104961021 +91-8104961021 | Maharashtra, India | 82 | 58 | Inquiry |
JSK Chemicals | +919879767970 | Gujarat, India | 3756 | 58 | Inquiry |
Chem stride | +91-8169461298 +91-8169461298 | Maharashtra, India | 27 | 58 | Inquiry |
Madhu Chemicals | 08048970542 | Mumbai, India | 150 | 58 | Inquiry |
Sisco Research Laboratories Pvt. Ltd. | +91-22-4268 5800 | Mumbai, India | 4317 | 58 | Inquiry |
Punjab Chemicals & Crop Protection Limited | +91 (22) 2674-7900 | New Delhi, India | 125 | 0 | Inquiry |
ALPHA CHEMIKA | +91-22-22061123 +91-22-66382501 | Mumbai, India | 1681 | 43 | Inquiry |
S P Chem India | 08048954283 | Ahmedabad, India | 21 | 58 | Inquiry |
Scientific OEM | +91-22- 2343 7546 / 2341 3094 | New Delhi, India | 1996 | 38 | Inquiry |
Supplier | Advantage |
---|---|
Soham Chemical Industries | 58 |
PAARICHEM RESOURCES LLP | 58 |
JSK Chemicals | 58 |
Chem stride | 58 |
Madhu Chemicals | 58 |
Sisco Research Laboratories Pvt. Ltd. | 58 |
Punjab Chemicals & Crop Protection Limited | 0 |
ALPHA CHEMIKA | 43 |
S P Chem India | 58 |
Scientific OEM | 38 |
Related articles
- Acrylamide in Food
- Acrylamide is primarily used industrially to make polyacrylamide, which is mainly used in treating effluent from water treatme....
- Feb 23,2022
- Acrylamide and Cancer Risk
- Acrylamide is a substance that forms through a natural chemical reaction between sugars and asparagine, an amino acid, in plan....
- Oct 31,2019
- Acrylamide-Health Hazard and Toxicity
- Acrylamide (or acrylic amide) is an organic compound with the chemical formula CH2=CHC(O)NH2. It is a white odorless solid, so....
- Sep 4,2019
79-06-1(Acrylamide)Related Search:
1of4
chevron_right